Surface tension and contact angles of molten cadmium telluride

1990 ◽  
Vol 11 (1) ◽  
pp. 25-35 ◽  
Author(s):  
R. Balasubramanian ◽  
W. R. Wilcox
Keyword(s):  
Surface Tension ◽  
Cadmium Telluride ◽  
Contact Angles

scholarly journals Influence of moisture content on the contact angle and surface tension measured on birch wood surfaces

2021 ◽  
Author(s):  
Rami Benkreif ◽  
Fatima Zohra Brahmia ◽  
Csilla Csiha
Keyword(s):  
Surface Tension ◽  
Contact Angle ◽  
Moisture Content ◽  
Solid Wood ◽  
Contact Angles ◽  
Surface Moisture ◽  
Wood Coatings ◽  
The Relationship ◽  
Wood Surfaces

AbstractSurface tension of solid wood surfaces affects the wettability and thus the adhesion of various adhesives and wood coatings. By measuring the contact angle of the wood, the surface tension can be calculated based on the Young-Dupré equation. Several publications have reported on contact angle measured with different test liquids, under different conditions. Results can only be compared if the test conditions are similar. While the roles of the drop volume, image shooting time etc., are widely recognized, the role of the wood surface moisture content (MC) is not evaluated in detail. In this study, the effect of wood moisture content on contact angle values, measured with distilled water and diiodomethane, on sanded birch (Betula pendula) surfaces was investigated, in order to find the relationship between them. With increasing MC from approximately 6% to 30%, increasing contact angle (decreasing surface tension) values were measured according to a logarithmic function. The function makes possible the calculation of contact angles that correspond to different MCs.

scholarly journals Experimental Investigation of Coal Dust Wettability Based on Surface Contact Angle

2016 ◽  
Vol 2016 ◽  
pp. 1-8 ◽  
Author(s):  
Gang Zhou ◽  
Han Qiu ◽  
Qi Zhang ◽  
Mao Xu ◽  
Jiayuan Wang ◽  
...  
Keyword(s):  
Surface Tension ◽  
Contact Angle ◽  
Specific Surface ◽  
Coal Dust ◽  
Single Point ◽  
Contact Angles ◽  
Critical Surface ◽  
Volume Percentage ◽  
Surface Areas ◽  
Specific Surface Areas

Wettability is one of the key chemical properties of coal dust, which is very important to dedusting. In this paper, the theory of liquid wetting solid was presented firstly; then, taking the gas coal of Xinglongzhuang coal mine in China as an example, by determination of critical surface tension of coal piece, it can be concluded that only when the surface tension of surfactant solution is less than 45 mN/m can the coal sample be fully wetted. Due to the effect of particle dispersity, compared with the contact angle of milled coal particle, not all the contact angles of screened coal powder with different sizes have a tendency to increase. Furthermore, by the experiments of coal samples’ specific surface areas and porosities, it can be achieved that the volume of single-point total pore decreases with the gradual decreasing of coal’s porosity, while the ultramicropores’ dispersities and multipoint BET specific surface areas increase. Besides, by a series of contact angle experiments with different surfactants, it can be found that with the increasing of porosity and the decreasing of volume percentage of ultramicropore, the contact angle tends to reduce gradually and the coal dust is much easier to get wetted.

Design Parameters for Superhydrophobicity and Superoleophobicity

MRS Bulletin ◽  
2008 ◽  
Vol 33 (8) ◽  
pp. 752-758 ◽  
Author(s):  
Anish Tuteja ◽  
Wonjae Choi ◽  
Gareth H. McKinley ◽  
Robert E. Cohen ◽  
Michael F. Rubner
Keyword(s):  
Surface Tension ◽  
Surface Topography ◽  
Leaf Surface ◽  
Contact Angles ◽  
Design Parameters ◽  
Lotus Leaf ◽  
General Design ◽  
Composite Interface

AbstractRecent experiments have revealed that the wax on the lotus leaf surface, by itself, is weakly hydrophilic, even though the lotus leaf is known to be superhydrophobic. Conventional understanding suggests that a surface of such waxy composition should not be able to support superhydrophobicity and high contact angles between a liquid and the surface. Here, we show that the unexpected superhydrophobicity is related to the presence of “reentrant texture” (that is, a multivalued surface topography) on the surface of the lotus leaf. We exploit this understanding to enable the development of superoleophobic surfaces (i.e., surfaces that repel extremely low-surface-tension liquids, such as various alkanes), where essentially no naturally oleophobic materials exist. We also develop general design parameters that enable the evaluation of the robustness of the composite interface on a particular surface. Based on these design parameters, we also rank various superhydrophobic and superoleophobic substrates discussed in the literature, with particular emphasis on surfaces developed from inherently hydrophilic or oleophilic materials.

Investigation of Pool Boiling Critical Heat Flux Enhancement on a Modified Surface Through the Dynamic Wetting of Water Droplets

2012 ◽  
Vol 134 (7) ◽  
Author(s):  
Ho Seon Ahn ◽  
Joonwon Kim ◽  
Moo Hwan Kim
Keyword(s):  
Surface Tension ◽  
Heat Flux ◽  
Contact Angle ◽  
Critical Heat Flux ◽  
Pool Boiling ◽  
Water Layer ◽  
Contact Angles ◽  
Water Droplets ◽  
Dynamic Wetting ◽  
Modified Surface

Dynamic wetting behaviors of water droplet on the modified surface were investigated experimentally. Dynamic contact angles were measured as a characterization method to explain the extraordinary pool boiling critical heat flux (CHF) enhancement on the zirconium surface by anodic oxidation modification. The sample surface is rectangular zirconium alloy plates (20 × 25 × 0.7 mm), and 12 μl of deionized water droplets were fallen from 40 mm of height over the surface. Dynamic wetting movement of water on the surface showed different characteristics depending on static contact angle (49.3 deg–0 deg) and surface temperature (120 °C–280 °C). Compared with bare surface, wettable and spreading surface had no-receding contact angle jump and seemed stable evaporating meniscus of liquid droplet in dynamic wetting condition on hot surface. This phenomenon could be explained by the interaction between the evaporation recoil and the surface tension forces. The surface tension force increased by micro/nanostructure of the modified zirconium surface suppresses the vapor recoil force by evaporation which makes the water layer unstable on the heated surface. Thus, such increased surface force could sustain the water layer stable in pool boiling CHF condition so that the extraordinary CHF enhancement could be possible.

scholarly journals Surface, Volumetric, and Wetting Properties of Oleic, Linoleic, and Linolenic Acids with Regards to Application of Canola Oil in Diesel Engines

2019 ◽  
Vol 9 (17) ◽  
pp. 3445 ◽  
Author(s):  
Anna Zdziennicka ◽  
Katarzyna Szymczyk ◽  
Bronisław Jańczuk ◽  
Rafał Longwic ◽  
Przemysław Sander
Keyword(s):  
Surface Tension ◽  
Contact Angle ◽  
Diesel Engines ◽  
Canola Oil ◽  
Contact Angles ◽  
Physiochemical Properties ◽  
Engine Valve ◽  
Wetting Properties ◽  
Main Components ◽  
Adhesion Work

Oleic, linoleic, and linolenic acids are the main components of canola oil and their physiochemical properties decide on the use of canola oil as fuel for diesel engines. Therefore, the measurements of the surface tension of oleic, linoleic, and linolenic acids being the components of the canola oil, as well as their contact angles on the polytetrafluoroethylene (PTFE), poly(methyl methacrylate) (PMMA), and engine valve, were made. Additionally, the surface tension and contact angle on PTFE, PMMA, and the engine valve of the oleic acid and n-hexane mixtures were measured. On the basis of the obtained results, the components and parameters of oleic, linoleic, and linolenic acids’ surface tension were determined and compared to those of the canola oil. Next, applying the components and parameters of these acids, their adhesion work to PTFE, PMMA, and the engine valve was calculated by means of various methods.

scholarly journals Amphiphobic Nanostructured Coatings for Industrial Applications

Materials ◽  
2019 ◽  
Vol 12 (5) ◽  
pp. 787 ◽  
Author(s):  
Federico Veronesi ◽  
Giulio Boveri ◽  
Mariarosa Raimondo
Keyword(s):  
Surface Tension ◽  
Contact Angle ◽  
Photoelectron Spectroscopy ◽  
Contact Angle Hysteresis ◽  
Contact Angles ◽  
Friction Reduction ◽  
Hybrid Coatings ◽  
Wetting Behavior ◽  
Wide Range ◽  
Solid Liquid

The search for surfaces with non-wetting behavior towards water and low-surface tension liquids affects a wide range of industries. Surface wetting is regulated by morphological and chemical features interacting with liquid phases under different ambient conditions. Most of the approaches to the fabrication of liquid-repellent surfaces are inspired by living organisms and require the fabrication of hierarchically organized structures, coupled with low surface energy chemical composition. This paper deals with the design of amphiphobic metals (AM) and alloys by deposition of nano-oxides suspensions in alcoholic or aqueous media, coupled with perfluorinated compounds and optional infused lubricant liquids resulting in, respectively, solid–liquid–air and solid–liquid–liquid working interfaces. Nanostructured organic/inorganic hybrid coatings with contact angles against water above 170°, contact angle with n-hexadecane (surface tension γ = 27 mN/m at 20 °C) in the 140–150° range and contact angle hysteresis lower than 5° have been produced. A full characterization of surface chemistry has been undertaken by X-ray photoelectron spectroscopy (XPS) analyses, while field-emission scanning electron microscope (FE-SEM) observations allowed the estimation of coatings thicknesses (300–400 nm) and their morphological features. The durability of fabricated amphiphobic surfaces was also assessed with a wide range of tests that showed their remarkable resistance to chemically aggressive environments, mechanical stresses and ultraviolet (UV) radiation. Moreover, this work analyzes the behavior of amphiphobic surfaces in terms of anti-soiling, snow-repellent and friction-reduction properties—all originated from their non-wetting behavior. The achieved results make AM materials viable solutions to be applied in different sectors answering several and pressing technical needs.

Évaluation du pouvoir adhérant du Lactobacillus helveticus au polystyrène expansé

1992 ◽  
Vol 38 (7) ◽  
pp. 672-675 ◽  
Author(s):  
Nathalie Dion ◽  
Jacques Goulet ◽  
Patrick Boyaval
Keyword(s):  
Surface Tension ◽  
Liquid System ◽  
Contact Angles ◽  
Expanded Polystyrene ◽  
Lactobacillus Helveticus ◽  
Bacterial Cells ◽  
Three Phase ◽  
Thermodynamic Conditions ◽  
Polystyrene Support ◽  
Solid Liquid

We measured the surface tension of a three-phase (solid–solid–liquid) system consisting of the bacterium Lactobacillus helveticus in a culture medium containing an expanded polystyrene support, to determine the adherence capacity of the bacteria to the support. The surface tension of the expanded polystyrene and the L. helveticus cells was evaluated by measuring contact angles. The Wilhelmy's microslide method was used to measure the surface tension of the liquid phase. The values obtained showed that the adherence capacity of the L. helveticus cells to expanded polystyrene pellets was not facilitated under the experimental thermodynamic conditions. The pellet surfaces and adhering bacterial cells were examined with a scanning electron microscope. The pellets exhibited several grooves in which microbial cells preferentially accumulated. Key words: Lactobacillus helveticus, adherence, surface tension, expanded polystyrene. [Translated by the journal]

scholarly journals Hydraulic Performance Modifications of a Zeolite Membrane after an Alkaline Treatment: Contribution of Polar and Apolar Surface Tension Components

2015 ◽  
Vol 2015 ◽  
pp. 1-7 ◽  
Author(s):  
Patrick Dutournié ◽  
Ali Said ◽  
T. Jean Daou ◽  
Jacques Bikaï ◽  
Lionel Limousy
Keyword(s):  
Surface Tension ◽  
Alkaline Treatment ◽  
Contact Angles ◽  
Van Der Waals Interactions ◽  
Zeolite Membrane ◽  
Polar Component ◽  
Material Surface ◽  
Hydraulic Permeability ◽  
Angle Measurements ◽  
Contact Angle Measurements

Hydraulic permeability measurements are performed on low cut-off Na-mordenite (MOR-type zeolites) membranes after a mild alkaline treatment. A decrease of the hydraulic permeability is systematically observed. Contact angle measurements are carried out (with three polar liquids) on Na-mordenite films seeded onto alumina plates (flat membranes). A decrease of the contact angles is observed after the alkaline treatment for the three liquids. According to the theory of Lifshitz-van der Waals interactions in condensated state, surface modifications are investigated and a variation of the polar component of the material surface tension is observed. After the alkaline treatment, the electron-donor contribution (mainly due to the two remaining lone electron pairs of the oxygen atoms present in the zeolite extra frameworks) decreases and an increase of the electron-receptor contribution is observed and quantified. The contribution of the polar component to the surface tension is attributed to the presence of surface defaults, which increase the surface hydrophilicity. The estimated modifications of the surface interaction energy between the solvent (water) and the Na-mordenite active layer are in good agreement with the decrease of the hydraulic permeability observed after a mild alkaline treatment.

Spreading-Droplet Simulation With Surface Tension Model Using Inter-Particle Force in Particle Method

2013 ◽  
Author(s):  
Eiji Ishii ◽  
Taisuke Sugii
Keyword(s):  
Surface Tension ◽  
Contact Angle ◽  
Dynamic Contact Angle ◽  
Particle Method ◽  
Dynamic Contact ◽  
Contact Angles ◽  
Particle Methods ◽  
Static Contact ◽  
Particle Force ◽  
Surface Tension Model

Predicting the spreading behavior of droplets on a wall is important for designing micro/nano devices used for reagent dispensation in micro-electro-mechanical systems, printing processes of ink-jet printers, and condensation of droplets on a wall during spray forming in atomizers. Particle methods are useful for simulating the behavior of many droplets generated by micro/nano devices in practical computational time; the motion of each droplet is simulated using a group of particles, and no particles are assigned in the gas region if interactions between the droplets and gas are weak. Furthermore, liquid-gas interfaces obtained from the particle method remain sharp by using the Lagrangian description. However, conventional surface tension models used in the particle methods are used for predicting the static contact angle at a three-phase interface, not for predicting the dynamic contact angle. The dynamic contact angle defines the shape of a spreading droplet on a wall. We previously developed a surface tension model using inter-particle force in the particle method; the static contact angle of droplets on the wall was verified at various contact angles, and the heights of droplets agreed well with those obtained theoretically. In this study, we applied our surface tension model to the simulation of a spreading droplet on a wall. The simulated dynamic contact angles for some Weber numbers were compared with those measured by Šikalo et al, and they agreed well. Our surface tension model was useful for simulating droplet motion under static and dynamic conditions.

Sign in / Sign up

Export Citation Format

Share Document