Wastewater Disinfection Using Artificial Ultraviolet Rays Technology

Author(s):  
Abeer EL Shahawy ◽  
Sahar El-Shatoury ◽  
Salah Bayomi ◽  
Diaa El-Monayeri
2017 ◽  
Vol 3 (1) ◽  
Author(s):  
Rahmawati Rahmawati ◽  
Trimayasari Trimayasari ◽  
Ghozali Akhmad Mustaqim ◽  
Wening Dwi Prastiwi ◽  
Emas Agus Prastyo Wibowo

AbstractSoap facial cleanser is needed to keep the facial skin to keep them clean and healthy. The purpose of this study to make soap cleanser with natural materials such as hard water deposits leri. This is because the use of leri water starch or starch granules of fine particles contained in water leri dansel dust can shed the dead skin on the face because of the essential amino acids contained can regenerate skin cells. In addition, water leri can brighten the face because the leri water oryzanol contain substances that can update the development and formation of the pigment melanin, which is effectively to ward off ultraviolet rays. The process of making soap using the principle of saponification reaction, namely the reaction between the oil and the KOH/NaOH. Facial cleansing soap made in this study is solid soap. Based on the results of quality test, soap solid leri water has a pH of 11.1, saponification number is 33, the water content of 46% as well as respondents to the test aspects of aroma and foam shows good results so this water leri treatment can be an alternative solution to prevent the use of soap facial cleansers that contain harmful chemicals. Keywords: air leri, soap cleanser, saponification  AbstrakSabun pembersih wajah sangat diperlukan untuk menjaga kulit wajah agar tetap bersih dan sehat. Tujuan dari penelitian ini untuk membuat sabun pembersih wajah dengan bahan alami berupa endapan air leri. Penggunaan air leri ini dikarenakan butiran partikel starch atau pati halus yang terdapat dalam air leri dapat merontokkan debu dansel kulit mati pada wajah karena asam amino esensial yang terkandung dapat meregenerasi sel-sel kulit. Selain itu, air leri dapat mencerahkan wajah karena air leri mengandung zat oryzanol yang dapat memperbarui perkembangan dan pembentukan pigmen melanin, yang efektif guna menangkal sinar ultraviolet. Proses pembuatan sabun menggunakan prinsip reaksi saponifikasi, yaitu reaksi antara minyak dan KOH/NaOH. Sabun pembersih wajah yang dibuat dalam penelitian ini ialah sabun padat. Berdasarkan hasil uji mutu, sabun air leri padat memiliki pH 11,1, angka penyabunan sebesar 33 kadar air 46 kadar air 46 % serta uji responden terhadap aspek aroma dan busa yang menunjukkan hasil cukup baik sehingga pengolahan air leri ini dapat menjadi solusi alternative untuk mencegah penggunaan sabun pembersih wajah yang mengandung bahan kimia berbahaya. Kata kunci: air leri, sabun pembersih wajah, saponifikasi 


1977 ◽  
Vol 46 (1) ◽  
pp. 66-71 ◽  
Author(s):  
Ikuo KASHIWAGI ◽  
Yasuo KOBAYASHI ◽  
Tokiharu MATSUKAWA

2018 ◽  
Vol 2 (1) ◽  
pp. 1-8 ◽  
Author(s):  
Yogi Udjaja

Skin cancer is an abnormal growth of human skin that can damage skin cells. By knowing the symptoms of skin cancer as early as posssible, it is helpful in preventing the spread of cancer cells and treatment. There are many factors that cause skin cancer, but in general the cause is exposure to ultraviolet rays from the sun.  Therefore, an expert system application is required to detect skin cancer.  By using backward chining and probalility methode; which data is in form of someone’s risk factor and clinical sympthoms, then the application will provide temporary diagnosis.  This application is built in an android platfrom because in its development android is more used than other platforms. The accuracy obtained from this application is 96.67%.


Author(s):  
О. Halak ◽  
N. Poltorak ◽  
О. Kravchuk ◽  
V. Synko ◽  
Y. Korol

Contamination of hazardous chemicals is currently considered one of the major environmental problems. The methods of purification of gaseous emissions depending on the physicochemical properties of pollutants, in particular dangerous chemical, their aggregate state, concentration in the gas environment are studied in this article. The effect of aerosol content such as dust and soot is analyzed as well as the efficiency of purification methods at different temperature intervals, methods of purification of multicomponent mixtures. The comparative characteristics of thermochemical, reagent, sorption and catalytic methods are given and the prospects of their application in filtering systems of stationary and mobile objects are evaluated. It has been proved that almost any organic compounds can be oxidized (mineralized) on the TiO2surface. In practice, any photocatalytic air purifier includes a porous TiO2 deposited carrier, which is irradiated with ultraviolet rays and through which air is purged. Photocatalysis is suitable for domestic use as it can occur at room temperature. For example, a thermocatalytic method of destroying harmful substances requires preheating the air to a temperature above 200 ° C. Photocatalysis destroys substances that penetrate even through activated carbon filters. Features of formation of oxide coatings by plasma-electrolytic oxidation of titanium alloys are considered. It is proposed to refine the design of collective defense systems on armored vehicles and stationary facilities with additional installation in the filter-absorber of the grid with the deposited layer of catalytic material, which will neutralize various types of dangerous chemicals due to photocatalytic air purification.


1994 ◽  
Vol 30 (4) ◽  
pp. 125-132 ◽  
Author(s):  
D. Carnimeo ◽  
E. Contini ◽  
R. Di Marino ◽  
F. Donadio ◽  
L. Liberti ◽  
...  

The pilot investigation on the use of UV as an alternative disinfectant to NaOCI was started in 1992 at Trani (South Italy) municipal wastewater treatment plant (335 m3/h). The results collected after six months continuous operation enabled us to compare UV and NaOCl disinfection effectiveness on the basis of secondary effluent characteristics, quantify photoreactivation effects, evidence possible DBP formation and assess costs.


2020 ◽  
Vol 21 (24) ◽  
pp. 9769
Author(s):  
Saaya Koike ◽  
Kenshi Yamasaki

The epidermis is located in the outermost layer of the living body and is the place where external stimuli such as ultraviolet rays and microorganisms first come into contact. Melanocytes and melanin play a wide range of roles such as adsorption of metals, thermoregulation, and protection from foreign enemies by camouflage. Pigmentary disorders are observed in diseases associated with immunodeficiency such as Griscelli syndrome, indicating molecular sharing between immune systems and the machineries of pigment formation. Melanocytes express functional toll-like receptors (TLRs), and innate immune stimulation via TLRs affects melanin synthesis and melanosome transport to modulate skin pigmentation. TLR2 enhances melanogenetic gene expression to augment melanogenesis. In contrast, TLR3 increases melanosome transport to transfer to keratinocytes through Rab27A, the responsible molecule of Griscelli syndrome. TLR4 and TLR9 enhance tyrosinase expression and melanogenesis through p38 MAPK (mitogen-activated protein kinase) and NFκB signaling pathway, respectively. TLR7 suppresses microphthalmia-associated transcription factor (MITF), and MITF reduction leads to melanocyte apoptosis. Accumulating knowledge of the TLRs function of melanocytes has enlightened the link between melanogenesis and innate immune system.


Coatings ◽  
2021 ◽  
Vol 11 (2) ◽  
pp. 253
Author(s):  
Ruslan Rushanovich Safin ◽  
Aigul Ravilevna Shaikhutdinova ◽  
Ruslan Khasanshin ◽  
Shamil Mukhametzyanov ◽  
Albina Safina

This work is devoted to the study of the effect of ultraviolet rays for the surface activation of pine wood thermally modified at temperatures of 180−240 °C in order to increase the surface roughness, enhance the wettability of thermal wood and the adhesive strength of the glue in the production of wood block furniture panels. Studies were carried out to measure the contact angle of wettability of thermally modified wood samples of pine, as a result of which it was determined that the ultraviolet treatment process contributes to an increase in the adhesion properties of the surface layer of thermally modified wood by more than 13% due to the reactivity of ultraviolet rays to oxidize and degrade ligno-containing wood products. At the same time, the most active process of surface activation takes place during 60 min of ultraviolet irradiation of wood with a total irradiation of at least 125 W/cm2. It was revealed that the combined effect of two-stage wood processing, including preliminary volumetric thermal modification followed by surface ultraviolet treatment, causes an increase in the moisture resistance of glued wood products by 24%. So, if the strength of the glue seam when gluing natural wood samples after boiling decreased by 46%, then the samples that underwent two-stage processing showed a decrease only by 22%. In connection with the results obtained, an improved technology for the production of furniture boards for the manufacture of moisture-resistant wood products is proposed.


1926 ◽  
Vol 44 (4) ◽  
pp. 483-502
Author(s):  
Louise Pearce ◽  
Chester M. Van Allen

An analysis has been made of the organ weights of normal rabbits exposed to a constant illumination having none of the shorter ultraviolet rays and of other rabbits kept in darkness for periods of 2 to 12 weeks. The environment of constant illumination was associated with a well marked decrease in the relative weights of most organs, and in certain instances this occurred when the organ weights of the controls were becoming increasingly large. There was also an associated effect of stabilization of organ weight. The majority of the organs of rabbits caged in constant darkness also showed a tendency toward decreased and stabilized weights, but these effects were less pronounced than in the rabbits caged under conditions of constant illumination. A notable exception to this general result was the weight of the liver which was markedly increased. The results of this experiment support the conception that there is a relationship between light and the physical state of the animal organism which may be expressed in the concrete form implied by the trend or direction of organ weight.


Sign in / Sign up

Export Citation Format

Share Document