Effects of an (Intumescent flame retardant)-montmorillonite combination on the thermal stability and fire-retardant properties of LDPE/EVA nanocomposites

2013 ◽  
Vol 19 (4) ◽  
pp. 285-292 ◽  
Author(s):  
Suqing Chen ◽  
Baishen Sun ◽  
Guobo Huang ◽  
Haichang Guo ◽  
Shuqu Wang
Keyword(s):  
Thermal Stability ◽  
Flame Retardant ◽  
Fire Retardant ◽  
Intumescent Flame Retardant ◽  
Fire Retardant Properties

LDPE/LLDPE/APP Intumescent Flame Retardant Systems: Molding Parameters and Properties

2011 ◽  
Vol 317-319 ◽  
pp. 112-115 ◽  
Author(s):  
Yu Hua Guo ◽  
Jian Jun Guo ◽  
Zhen Huang ◽  
Li Jun Teng
Keyword(s):  
Flame Retardant ◽  
Fire Retardant ◽  
Mold Temperature ◽  
Intumescent Flame Retardant ◽  
Low Density Polyethylene ◽  
Low Density ◽  
Filling Time ◽  
Fire Retardant Properties ◽  
Properties Of Materials ◽  
Processing Properties

Low density polyethylene and linear low density polyethylene (LDPE/LLDPE (60wt.%/40wt.%))as basic materials, intumescent flame retardant ammonium polyphosphate (APP) was added into them to obtain fire retardant systems. The molding parameters, fire retardant properties, mechanical properties and processing properties of samples were examined. It was showed the rotational speed of main screw was 28-34rad/min. when samples were molded, cylinder temperature was 185-195°C, mold temperature was 85-115°C, preheating time was 5-10min and filling time was 8-21s. APP had good fire retardant and smoking suppression functions. Adding 30% (wt.%) APP can obtain grade of FV-0. With APP content increasing, the mechanical and processing properties of materials decreased.

scholarly journals Effects of Graphene Nanoplatelets on Mechanical and Fire Performance of Flax Polypropylene Composites with Intumescent Flame Retardant

Molecules ◽  
2021 ◽  
Vol 26 (13) ◽  
pp. 4094
Author(s):  
Imran Ali ◽  
Nam Kyeun Kim ◽  
Debes Bhattacharyya
Keyword(s):  
Flame Retardant ◽  
Decomposition Rate ◽  
Natural Fiber ◽  
Fire Retardant ◽  
Graphene Nanoplatelets ◽  
Intumescent Flame Retardant ◽  
Fume Hood ◽  
Fire Dynamics ◽  
Polypropylene Composites ◽  
Set Up

The integration of intumescent flame-retardant (IFR) additives in natural fiber-based polymer composites enhances the fire-retardant properties, but it generally has a detrimental effect on the mechanical properties, such as tensile and flexural strengths. In this work, the feasibility of graphene as a reinforcement additive and as an effective synergist for IFR-based flax-polypropylene (PP) composites was investigated. Noticeable improvements in tensile and flexural properties were achieved with the addition of graphene nanoplatelets (GNP) in the composites. Furthermore, better char-forming ability of GNP in combination with IFR was observed, suppressing HRR curves and thus, lowering the total heat release (THR). Thermogravimetric analysis (TGA) detected a reduction in the decomposition rate due to strong interfacial bonding between GNP and PP, whereas the maximum decomposition rate was observed to occur at a higher temperature. The saturation point for the IFR additive along with GNP has also been highlighted in this study. A safe and effective method of graphene encapsulation within PP using the fume-hood set-up was achieved. Finally, the effect of flame retardant on the flax–PP composite has been simulated using Fire Dynamics Simulator.

scholarly journals Enhancement of Wood Biological Resistance and Fire Retardant Properties after Laccase Assisted Enzymatic Grafting

Forests ◽  
2021 ◽  
Vol 12 (8) ◽  
pp. 1102
Author(s):  
Cristian Bolaño ◽  
Sabrina Palanti ◽  
Luigi Benni ◽  
Diego Moldes
Keyword(s):  
Silver Nanoparticles ◽  
Flame Retardant ◽  
Toxic Substance ◽  
Treated Wood ◽  
Fire Retardant ◽  
Wood Preservative ◽  
Decay Resistance ◽  
Kraft Lignin ◽  
Fire Retardant Properties ◽  
Wood Surfaces

Several treatments of wood, based on laccase assisted grafting, were evaluated in this paper. Firstly, the efficacy of lignosulfonate and kraft lignin from Eucalyptus spp. as a wood preservative was assessed. Both ligno products were anchored to wood surfaces via laccase treatment in order to avoid leaching. Moreover, some of these wood preservative treatments were completed with the addition of silver nanoparticles. For comparison, a commercial product was also analyzed in terms of its fungal decay resistance during surface application, in accordance to use class 3, CEN EN 335. Secondly, the anchoring of a flame retardant based on tetrabromobisphenol-A (TBBPA) was attempted, to limit the dispersion of this toxic substance from treated wood. In both cases, kraft lignin and lignosulfonate showed an improvement in wood durability, even after leaching. However, the addition of silver nanoparticles did not improve the efficacy. On the other hand, the efficacy of TBBPA as a flame retardant was not improved by grafting it with laccase treatment or by adding O2, a co-factor of laccase.

scholarly journals Role of Copper Oxide on Epoxy Coatings with New Intumescent Polymer-Based Fire Retardant

Molecules ◽  
2020 ◽  
Vol 25 (24) ◽  
pp. 5978
Author(s):  
Riyazuddin ◽  
Samrin Bano ◽  
Fohad Mabood Husain ◽  
Jamal Akhter Siddique ◽  
Khadijah H. Alharbi ◽  
...  
Keyword(s):  
Copper Oxide ◽  
Heat Release ◽  
Flame Retardant ◽  
Cone Calorimeter ◽  
Elevated Temperatures ◽  
Fire Retardant ◽  
Intumescent Flame Retardant ◽  
Gravimetric Analysis ◽  
Sem Images ◽  
Major Drawback

Epoxy resins (EP) have been used as a thermos-setting material in the field of coating, casting, bonding agent, and laminating. However, a major drawback associated with its use is the lack of good flaming properties, and it is responsible for heavy smoke along with hazardous gases considerably limiting its uses in various fields. In this study, N-ethanolamine triazine-piperizine, a melamine polymer (ETPMP), was established as a new charring-foaming agent and was successfully synthesized with ethanolamine, piperizine, cyanuric chloride, and melamine as precursor molecules via the nucleophilic substitution reaction method. Elemental analysis and Fourier transform infrared (FTIR) spectroscopy analysis were applied to approve the synthesis of ETPMP and confirmation of its structure and characterization. The epoxy coating of intumescent flame retardant (IFR) was equipped by introducing ETPMP, ammonium polyphosphate (APP), and copper oxide (CuO) in multiple composition ratios. CuO was loaded at various amounts into the IFR-coating system as a synergistic agent. The synergistic action of CuO on IFR coatings was scientifically examined by using different analytical tests such as vertical burning test (UL-94V), limited oxygen index (LOI), thermal gravimetric analysis (TGA), cone calorimeter, and scanning electron microscope (SEM). The results showed that small changes in the amount of CuO expressively amplified the LOI results and enhanced the V-0 ratings in the UL-94V test. The TGA data clearly demonstrate that the inclusion of CuO can transform the thermal deprivation behavior of coatings with a growing char slag proportion with elevated temperatures. Information from cone calorimeter data affirmed that CuO can decrease the burning factors by total heat release (THR) together with peak heat release rate (PHRR). The SEM images indicated that CuO can enrich the power and compression of the intumescent char that restricts the movement of heat and oxygen. Our results demonstrate a positive influence of CuO on the epoxy-headed intumescent flame retardant coatings.

Synthesis and Application of a Novel Intumescent Flame Retardant Containing Ferrocenyl

2014 ◽  
Vol 1033-1034 ◽  
pp. 931-936
Author(s):  
Cong Yan Chen ◽  
Rui Lan Fan ◽  
Guan Qun Yun
Keyword(s):  
Thermal Stability ◽  
Flame Retardant ◽  
Flame Retardants ◽  
Intumescent Flame Retardant ◽  
Limiting Oxygen Index ◽  
Good Thermal Stability ◽  
H Nmr ◽  
Positive Effect ◽  
Thermal Stability Of ◽  
Phosphate Groups

A novel intumescent flame retardant (IFR) containing ferrocene and caged bicyclic phosphate groups, 1-oxo-4-[4'-(ferrocene carboxylic acid phenyl ester)] amide-2, 6, 7-trioxa-1-phosphabicyclo- [2.2.2] octane (PFAM), was successfully synthesized. The synthesized PFAM were added to flammable polyurethane (PU) as flame retardants and smoke suppressants. The structure of PFAM was characterized by Fourier transform infrared spectroscopy (FTIR), nuclear magnetic resonance (1H NMR) and elemental analysis. Thermal stability of PFAM was tested by themogravimetric analysis (TGA). The results revealed that PFAM had good thermal stability and high char weight, the char weight up to 54% at 600 °C. Flammability properties of PU/PFAM composites were investigated by limiting oxygen index (LOI) test and UL-94 test, respectively. The results of LOI tests showed that the addition of PFAM enhanced flame retardancy of PU. When the content of PFAM reaches to 3%, the LOI value is 22.2. The morphologies of the char for PU and PU/3% PFAM composite can be obtained after LOI testing were examined by SEM. The results demonstrated that PFAM could promote to form the compact and dense intumescent char layer. Experiments showed that, the PFAM application of polyurethane showed positive effect.

Properties of Fire Retardant Thermoplastic Vulcanizates from NR/PP Blends Filled with Aluminium Trihydrate and Magnesium Hydroxide with Reference to the Effect of Mixing Methods

2013 ◽  
Vol 844 ◽  
pp. 297-300 ◽  
Author(s):  
Alif Walong ◽  
Azizon Kaesaman ◽  
Tadamoto Sakai ◽  
Natinee Lopattananon
Keyword(s):  
Thermal Stability ◽  
Magnesium Hydroxide ◽  
Fire Retardant ◽  
Melt Mixing ◽  
Dynamic Vulcanization ◽  
Elongation At Break ◽  
Processing Cost ◽  
Fire Retardant Properties ◽  
Pp Blends ◽  
Internal Mixer

Blends of natural rubber (NR) and polypropylene (PP) with composition of 60/40 %wt were prepared by using an internal mixer to obtain thermoplastic vulcanizate (TPV). Aluminium trihydrate (ATH) and magnesium hydroxide (MH) were used as fillers to improve thermal stability and fire retardant properties. Three different mixing methods were used to incorporate the fillers into the TPVs, which were (1) compounding of NR and filler followed by dynamic vulcanization of NR during blending with PP, (2) compounding of NR with a half part of filler (and oil) followed by dynamic vulcanization of NR when blending with PP before adding another half part of filler into the blend (3) melt mixing of PP, NR and filler followed by dynamic vulcanization during mixing. The incorporation of ATH and MH decreased tensile strength and elongation at break of the TPVs, but increased the thermal stability and LOI%. From this work, the mixing of filler with NR/PP blend by using method 3 provided better balance of tensile, thermal and fire resistant properties and processing cost reduction.

Study on preparation and fire-retardant mechanism analysis of intumescent flame-retardant coatings

2007 ◽  
Vol 201 (18) ◽  
pp. 7835-7841 ◽  
Author(s):  
Jun-wei Gu ◽  
Guang-cheng Zhang ◽  
Shan-lai Dong ◽  
Qiu-yu Zhang ◽  
Jie Kong
Keyword(s):  
Flame Retardant ◽  
Fire Retardant ◽  
Intumescent Flame Retardant ◽  
Mechanism Analysis

scholarly journals ПРИДАНИЕ ОГНЕЗАЩИТНЫХ СВОЙСТВ ЦЕЛЛЮЛОЗНЫМ ТЕКСТИЛЬНЫМ МАТЕРИАЛАМ С ПРИМЕНЕНИЕМ ЗОЛЬ - ГЕЛЬ ТЕХНОЛОГИИ

2019 ◽  
pp. 365-372
Author(s):  
Bijamal Raimovna Tausarova ◽  
Anastasiya Yur'yevna Stasenko
Keyword(s):  
Heat Treatment ◽  
Flame Retardant ◽  
Sodium Silicate ◽  
Ignition Time ◽  
Fire Retardant ◽  
Hydrogen Phosphate ◽  
Sodium Hydrogen Phosphate ◽  
Sodium Hydrogen ◽  
Fire Retardant Properties ◽  
Flame Retardant Properties

The article presents studies on the use of a new composition based on sodium silicate, urea and sodium hydrogen phosphate to impart fire-retardant properties to cellulosic textile materials. The influence of the concentration of the starting components, temperature, and heat treatment time on the flame retardant properties was studied. The change in the fire retardant properties of cotton fabric is given for three heat treatment modes: at 80, 90 and 100 °C. Compared to the initial fabric, the samples treated with a flame retardant have indicators of flame retardant properties. Untreated fabric with a size of 220×170 mm when tested for flammability at an ignition time of 15 s completely burns out in 60 s. In samples treated with a flame retardant, at an ignition time of 15 s, the smoldering time is practically reduced to zero. With an increase in the concentration of the flame retardant, and the temperature of the heat treatment, the loss of material strength, breaking load, and the appearance of the fabric change slightly. Using electron scanning microscopy and energy dispersive microanalysis, it was shown that pure cotton fabric contains 68.77% carbon and 31.22% oxygen; after modification, particles of sodium – 0.02%, phosphorus – 0.04% and potassium – 0.05% are formed on the surface of the treated fabric. distributed fairly unevenly. It has been shown that in cellulosic materials modified with compositions based on sodium silicate and urea, sodium hydrogen phosphate, flame retardant properties increase. The proposed composition provides the achievement of higher fire resistance. Processing can be carried out on standard equipment of finishing enterprises without the stage of high-temperature fixation of the drug.

Sign in / Sign up

Export Citation Format

Share Document