scholarly journals Torsional vibration characteristics analysis of DFIG-based wind farm and its equivalent model

2017 ◽  
Vol 12 (5) ◽  
pp. 646-656
Author(s):  
Da Xie ◽  
Junbo Sun ◽  
Yupu Lu ◽  
Yucheng Lou ◽  
Chenghong Gu ◽  
...  
Keyword(s):  
Torsional Vibration ◽  
Wind Farm ◽  
Vibration Characteristics ◽  
Equivalent Model ◽  
Characteristics Analysis

scholarly journals An equivalent modeling method for Offshore Wind Farms based on fault characteristics analysis

2019 ◽  
Vol 107 ◽  
pp. 01004
Author(s):  
Haiyan Tang ◽  
Guanglei Li ◽  
Linan Qu ◽  
Yan Li
Keyword(s):  
Wind Turbines ◽  
Wind Farm ◽  
Wind Farms ◽  
Modeling Method ◽  
Operating Conditions ◽  
Offshore Wind ◽  
Equivalent Model ◽  
Offshore Wind Farm ◽  
Offshore Wind Farms ◽  
Characteristics Analysis

A large offshore wind farm usually consists of dozens or even hundreds of wind turbines. Due to the limitation of the simulation scale, it is necessary to develop an equivalent model of offshore wind farms for power system studies. At present, the aggregation method is widely adopted for wind farm equivalent modeling. In this paper, the topology, electrical parameters, operating conditions and individual turbine characteristics of the offshore wind farms are taken into consideration. Firstly, the output power distribution of offshore wind farm, the voltage distribution of the collector system and the fault ride-through characteristics of wind turbines are analyzed. Then, a dynamic equivalent modeling method for offshore wind farms is developed based on the fault characteristics analysis. Finally, the proposed method is validated through time-domain simulation.

Modelling Wind Farm with Doubly Fed Induction Generators Based on Characteristic Fusion

2014 ◽  
Vol 494-495 ◽  
pp. 1820-1824
Author(s):  
Dong Ning Wei ◽  
Xue Min Zhang ◽  
Jian Min Ye
Keyword(s):  
Wind Speed ◽  
Wind Farm ◽  
Measurement Data ◽  
Equivalent Model ◽  
Modelling Framework ◽  
Induction Generators ◽  
Doubly Fed Induction Generators ◽  
Wake Model ◽  
Basic Characteristics ◽  
Doubly Fed

In this paper, a novel modelling approach based on characteristic fusion is proposed and used to build a static equivalent model of wind farm. Firstly, the modelling framework based on characteristic fusion is given. Secondly, the basic characteristics of wind farm including characteristic of wind turbine generator (WTG), wind speed spatial distribution and characteristic of wind farm are analyzed according to the framework. Then detailed modelling process is provided utilizing SVR as a fusion tool. This approach combines the advantages of both mechanism and non-mechanism methods with both satisfactory fitting ability and generalization ability. It only requires the maximum and minimum value of wind speed among the wind farm, rather than accurate wake model as mechanism method nor massive measurement data as non-mechanism method. Numerical simulation indicates the effectiveness and robustness of the proposed method. When available data is reduced or includes bad measurement, the proposed method can still keep favorable performance.

Dynamic Characteristics Analysis for the Headstock of a Vertical Machining Center

2016 ◽  
Vol 836-837 ◽  
pp. 348-358
Author(s):  
Zhe Li ◽  
Song Zhang ◽  
Yan Chen ◽  
Peng Wang ◽  
Ai Rong Zhang
Keyword(s):  
Dynamic Characteristics ◽  
Natural Frequencies ◽  
Vibration Characteristics ◽  
Numerical Control ◽  
Vibration Test ◽  
Machining Accuracy ◽  
Modal Test ◽  
Machining Center ◽  
Characteristics Analysis ◽  
Nc Machine

Dynamic characteristics of numerical control (NC) machine tools, such as natural frequency and vibration property, directly affect machining efficiency and finished surface quality. In general, low-order natural frequencies of critical components have significant influences on machine tool’s performances. The headstock is the most important component of the machine tool. The reliability, cutting stability, and machining accuracy of a machining center largely depend on the structure and dynamic characteristics of the headstock. First, in order to obtain the natural frequencies and vibration characteristics of the headstock of a vertical machining center, modal test and vibration test in free running and cutting conditions were carried out by means of the dynamic signal collection and analysis system. According to the modal test, the first six natural frequencies of the headstock were obtained, which can not only guide the working speed, but also act as the reference of structural optimization aiming at frequency-shift. Secondly, by means of the vibration test, the vibration characteristics of the headstock were obtained and the main vibration sources were found out. Finally the corresponding vibration reduction plans were proposed in this paper. That provides the reference for improving the performance of the overall unit.

Sign in / Sign up

Export Citation Format

Share Document