Large-scale testing facility for cyclic axially loaded piles

2013 ◽  
Vol 6 (3) ◽  
pp. 200-206 ◽  
Author(s):  
Matthias Baeßler ◽  
Werner Rücker ◽  
Pablo Cuéllar ◽  
Steven Georgi ◽  
Krassimire Karabeliov
2014 ◽  
Vol 996 ◽  
pp. 417-423 ◽  
Author(s):  
Arne Kromm ◽  
Thomas Kannengiesser

Results obtained from laboratory tests mostly need to be verified under fabrication conditions in order to incorporate design specifics (joint configuration and restraint), which effect the residual stress state considerably. For this purpose, multi-pass sub merged arc welding was performed in a special large-scale testing facility. The impact of varying interpass temperatures could be proven in-situ by means of a pronounced stress accumulation during welding and subsequent heat treatment accompanied by stress determination using X-ray diffraction.


1973 ◽  
Vol 10 (4) ◽  
pp. 645-647
Author(s):  
Eli I. Robinsky ◽  
Christopher B. H. Cragg

Preliminary tests in the new large-scale testing facility at the University of Toronto reveal that bearing capacity on a pile volume basis is more efficiently developed by a long slender pile or a group of short slender piles than by a pile of larger diameter. The authors attribute this to increased arching in the soil around the pile of greater volume displacement, believing arching buffers the pile from the effects of lateral soil pressure.


2016 ◽  
Vol 32 (2) ◽  
pp. 1261-1279
Author(s):  
Tarek Abdoun ◽  
Waleed El-Sekelly ◽  
Ricardo Dobry ◽  
Sabanayagam Thevanayagam ◽  
Marcelo Gonzalez

Centrifuge and large-scale testing in geotechnical engineering are very useful tools for modeling soil behavior under different loading conditions, particularly under earthquake loading. The paper presents an extensive database of nine centrifuge and large-scale liquefaction experiments performed both at the geotechnical centrifuge testing facility at Rensselaer Polytechnic Institute (RPI) and the large-scale testing facility at the University at Buffalo (UB). The database described herein was generated using the NEEShub online DataStore tool under the name “CENSEIS: Centrifuge and Large (Full)-Scale Modeling of Seismic Pore Pressures in Sands” (DOI: http://dx.doi.org/10.4231/D3GF0MX4F ). The paper discusses the tools and materials used in the experiments along with an explanation of each item in the database. Sample analyses are also presented in the paper to give an insight on the capabilities of the database for numerical and analytical applications. The paper is concluded with some possible applications along with tips and limitations of the database.


2021 ◽  
Vol 28 ◽  
pp. 100517
Author(s):  
Buddhima Indraratna ◽  
Trung Ngo ◽  
Fernanda Bessa Ferreira ◽  
Cholachat Rujikiatkamjorn ◽  
Ameyu Tucho

2015 ◽  
Vol 20 (4) ◽  
pp. 04014049 ◽  
Author(s):  
M. A. Perez ◽  
W. C. Zech ◽  
W. N. Donald ◽  
X. Fang

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Alisa Alekseenko ◽  
Donal Barrett ◽  
Yerma Pareja-Sanchez ◽  
Rebecca J. Howard ◽  
Emilia Strandback ◽  
...  

AbstractRT-LAMP detection of SARS-CoV-2 has been shown to be a valuable approach to scale up COVID-19 diagnostics and thus contribute to limiting the spread of the disease. Here we present the optimization of highly cost-effective in-house produced enzymes, and we benchmark their performance against commercial alternatives. We explore the compatibility between multiple DNA polymerases with high strand-displacement activity and thermostable reverse transcriptases required for RT-LAMP. We optimize reaction conditions and demonstrate their applicability using both synthetic RNA and clinical patient samples. Finally, we validate the optimized RT-LAMP assay for the detection of SARS-CoV-2 in unextracted heat-inactivated nasopharyngeal samples from 184 patients. We anticipate that optimized and affordable reagents for RT-LAMP will facilitate the expansion of SARS-CoV-2 testing globally, especially in sites and settings where the need for large scale testing cannot be met by commercial alternatives.


2021 ◽  
Vol 37 (2) ◽  
pp. 54-64
Author(s):  
D.V. Barabash ◽  
I.A. Butorova

The possibility of using simple and available methods for analyzing deodorants/antiperspirants has been studied. The gravimetric method was shown to have acceptable metrological characteristics under repeatability conditions when evaluating antiperspirant activity. A decrease in the number of microorganisms (CFU) on the axilla skin was observed in a rinse test experiment 4 h and 8 h after the application of deodorants/antiperspirants. The microbial population data were inversely proportional to the antiperspirant activity values of the tested compositions. The sweat secretion reducing decreases the amount of nutrients required for microbial development, which makes it possible to use the rinse test to indirectly evaluate deodorant activity in research and development of personal care products. However, due to its laboriousness and the need for volunteers, the method cannot be recommended for large-scale testing. It was shown that the disc diffusion method (DDM) used to detect Staphylococcus aureus, Pseudomonas aeruginosa and Bacillus subtilis cannot be applied to the assessment of the intrinsic antimicrobial activity of the tested cosmetic compositions. This indicates the necessity of additional studies to select test microorganisms typical for the armpit area. In addition, DDM is useful if the deodorant effect of the composition is created by the addition of low-volatile antibacterial compounds. Therefore, microbiological methods have limited applications and are not suitable for widespread use. deodorant action; antiperspirant action, gravimetry, disc diffusion method, rinse test; deodorant; antiperspirant; cosmetic; efficiency; consumer properties, functional properties This work was supported by MUCTR (project no. K-2020-007).


2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Steve Lambert ◽  
Dean Wilkinson

Purpose The outbreak of the severe acute respiratory syndrome coronavirus 2 virus and subsequent COVID-19 illness has had a major impact on all levels of society internationally. The extent of the impact of COVID-19 on prison staff and prisoners in England and Wales is unknown. Testing for COVID-19 both asymptomatic and symptomatic, as well as for antibodies, to date, has been minimal. The purpose of this paper is to explore the widespread testing of COVID-19 in prisons poses philosophical and ethical questions around trust, efficacy and ethicacy. Design/methodology/approach This paper is both descriptive, providing an overview of the widespread testing of COVID-19 in prisoners in England and Wales, and conceptual in that it discusses and argues the issues associated with large-scale testing. This paper provides a discussion, using comparative studies, of the issues associated with large-scale testing of prisoners across the prison estate in England and Wales (120 prisons). The issues identified in this paper are contextualised through the lens of COVID-19, but they are equally transferrable to epidemiological studies of any pandemic. Given the prevalence of COVID-19 globally and the lack of information about its spread in prisons, at the time of writing this paper, there is a programme of asymptomatic testing of prisoners. However, there remains a paucity of data on the spread of COVID-19 in prisons because of the progress with the ongoing testing programme. Findings The authors argue that the widespread testing of prisoners requires careful consideration of the details regarding who is included in testing, how consent is gained and how tests are administered. This paper outlines and argues the importance of considering the complex nuance of power relationships within the prison system, among prisoner officers, medical staff and prisoners and the detrimental consequences. Practical implications The widespread testing of COVID-19 presents ethical and practical challenges. Careful planning is required when considering the ethics of who should be included in COVID-19 testing, how consent will be gained, who and how tests will be administered and very practical challenges around the recording and assigning of COVID-19 test kits inside the prison. The current system for the general population requires scanning of barcodes and registration using a mobile number; these facilities are not permitted inside a prison. Originality/value This paper looks at the issues associated with mass testing of prisoners for COVID-19. According to the authors’ knowledge, there has not been any research that looks at the issues of testing either in the UK or internationally. The literature available details countries’ responses to the pandemic rather and scientific papers on the development of vaccines. Therefore, this paper is an original review of some of the practicalities that need to be addressed to ensure that testing can be as successful as possible.


Sign in / Sign up

Export Citation Format

Share Document