Torsional balance of nonlinear asymmetrical structures by means of a tuned mass damper

2019 ◽  
Vol 26 (11) ◽  
Author(s):  
Gilda Espinoza ◽  
José Luis Almazán ◽  
Franco Benedetti ◽  
Carolina Jara
Keyword(s):  
Tuned Mass Damper ◽  
Mass Damper ◽  
Torsional Balance

Prediction of Solutions of the Duffing System with Tuned Mass Damper

2020 ◽  
Vol 22 (4) ◽  
pp. 983-990
Author(s):  
Konrad Mnich
Keyword(s):  
Dynamical System ◽  
Duffing Oscillator ◽  
Probabilistic Approach ◽  
Nonlinear Dynamical System ◽  
Tuned Mass Damper ◽  
Nonlinear Dynamical ◽  
Duffing System ◽  
Mass Damper ◽  
Basin Stability ◽  
Stability Concept

AbstractIn this work we analyze the behavior of a nonlinear dynamical system using a probabilistic approach. We focus on the coexistence of solutions and we check how the changes in the parameters of excitation influence the dynamics of the system. For the demonstration we use the Duffing oscillator with the tuned mass absorber. We mention the numerous attractors present in such a system and describe how they were found with the method based on the basin stability concept.

Comparative Analysis of a Tuned Mass Damper Using Steel and a Ni-Ti Shape Memory Alloy

2019 ◽  
Author(s):  
Marcelio Ronnie Dantas de Sá ◽  
Armando Wilmans Nunes da Fonseca Júnior ◽  
Yuri Moraes ◽  
Antonio Almeida Silva
Keyword(s):  
Comparative Analysis ◽  
Shape Memory Alloy ◽  
Shape Memory ◽  
Tuned Mass Damper ◽  
Mass Damper

Effectiveness of Location and Number of Multiple Tuned Mass Damper for Seismic Structures

2020 ◽  
Vol 9 (6) ◽  
pp. 780-783
Keyword(s):  
Seismic Response ◽  
Software Tool ◽  
Tuned Mass Damper ◽  
Structure Study ◽  
Structural Performance ◽  
Mass Ratio ◽  
Tuned Mass Dampers ◽  
Maximum Reduction ◽  
Mass Damper ◽  
Earthquake Data

Tuned mass dampers (TMD) are one of the most reliable devices to control the vibration of the structure. The optimum mass ratio required for a single tuned mass damper (STMD) is evaluated corresponding to the fundamental natural frequency of the structure. The effect of STMD and Multiple tuned mass dampers (MTMD) on a G+20 storey structure are studied to demonstrate the damper’s effectiveness in seismic application. The location and number of tuned mass dampers are studied to give best structural performance in maximum reduction of seismic response for El Centro earthquake data. The analysis results from SAP 2000 software tool shows damper weighing 2.5% of the total weight of the structure effectively reduce the response of the structure. Study shows that introduction of 4-MTMD at top storey can effectively reduce the response by 10% more in comparison to single tuned mass damper. The use of MTMD of same mass ratio that of STMD is more effective in seismic response.

A novel tuned mass-conical spring system for passive vibration control of a variable mass structure

2021 ◽  
pp. 107754632110004
Author(s):  
Sanjukta Chakraborty ◽  
Aparna (Dey) Ghosh ◽  
Samit Ray-Chaudhuri
Keyword(s):  
Variable Mass ◽  
Design Procedure ◽  
Time History ◽  
Tuned Mass Damper ◽  
Water Tank ◽  
Mass System ◽  
Mass Damper ◽  
Linear Spring ◽  
Spring System ◽  
Elevated Water

This article presents the design of a tuned mass damper with a conical spring to enable tuning to the natural frequency of the system at multiple values, as may be convenient in case of a system with fluctuations in the mass. The principle and design procedure of the conical spring in the context of a varying mass system are presented. A passive feedback control mechanism based on a simple pulley-mass system is devised to cater to the multi-tuning requirements. A design example of an elevated water tank with fluctuating water content, subjected to ground excitation, is considered to numerically illustrate the efficiency of such a tuned mass damper associated with the conical spring. The conical spring is designed based on the tuning requirements at different mass conditions of the elevated water tank by satisfying the allowable load bearing capacity of the spring. Comparisons are made with the conventional passive tuned mass damper with a linear spring tuned to the full tank condition. Results from time history analysis reveal that the conical spring-tuned mass damper can be successfully designed to remain tuned and thereby achieve significant response reductions under stiffening conditions of the primary structure, whereas the linear spring-tuned mass damper suffers performance degradation because of detuning, whenever there is any fluctuation in the system mass.

scholarly journals Evaluation of the Impact of Weather-Related Limitations on the Installation of Offshore Wind Turbine Towers

Energies ◽  
2021 ◽  
Vol 14 (13) ◽  
pp. 3778
Author(s):  
Stephan Oelker ◽  
Aljoscha Sander ◽  
Markus Kreutz ◽  
Abderrahim Ait-Alla ◽  
Michael Freitag
Keyword(s):  
Discrete Event Simulation ◽  
Discrete Event ◽  
Weather Conditions ◽  
Tuned Mass Damper ◽  
Offshore Wind ◽  
Offshore Wind Turbine ◽  
Measurement Campaign ◽  
Event Simulation ◽  
Mass Damper ◽  
Wave Heights

Weather conditions have a significant impact on the installation of offshore wind turbines. The rules for installation set clear limits. These limits are usually based on estimations of various experts and not on real assumptions and measurements on-site. When wind speeds and wave heights are too high, work cannot be carried out, and this leads to delays and additional costs. Therefore, we have carried out a measurement campaign during the installation of rotor blades to investigate to which extent the limits can be adjusted by using a tuned mass damper. The results from the measurement campaign—specifically empirically derived significant wave height limits—are used in a discrete event simulation. This study simulates delays resulting from weather conditions. Based on this, the total installation costs are considered. The results of the measurement campaign show that a safe installation with the use of a damper is possible at wave heights of up to 1.6 m. With the discrete event simulation, it is possible to prove that 17.9% can be saved for the costs of the installation vessel. In addition, the wind farm could be erected 32 days faster. Thus, it can be stated that the use of a tuned mass damper simplifies the installation from a technical point of view and is economical.

scholarly journals Vibration suppression of structures using tuned mass damper technology: A state-of-the-art review

2021 ◽  
pp. 107754632098430
Author(s):  
Fan Yang ◽  
Ramin Sedaghati ◽  
Ebrahim Esmailzadeh
Keyword(s):  
Mathematical Modeling ◽  
Vibration Suppression ◽  
State Of The Art ◽  
Optimization Procedure ◽  
Tuned Mass Damper ◽  
Structural Vibration ◽  
Practical Realization ◽  
Reliable Operation ◽  
Mass Damper ◽  
Structural Vibration Suppression

To date, considerable attention has been paid to the development of structural vibration suppression techniques. Among all vibration suppression devices and techniques, the tuned mass damper is one of the most promising technologies due to its mechanical simplicity, cost-effectiveness, and reliable operation. In this article, a critical review of the structural vibration suppression using tuned mass damper technology will be presented mainly focused on the following four categories: (1) tuned mass damper technology and its modifications, (2) tuned mass damper technology in discrete and continuous structures (mathematical modeling), (3) optimization procedure to obtain the optimally designed tuned mass damper system, and (4) active tuned mass damper and semi-active tuned mass damper with the practical realization of the tuned mass damper technologies.

scholarly journals Effect of Frequency Characteristics of Ground Motion on Response of Tuned Mass Damper Controlled Inelastic Concrete Frame

Buildings ◽  
2021 ◽  
Vol 11 (2) ◽  
pp. 74
Author(s):  
Md Motiur Rahman ◽  
Tahmina Tasnim Nahar ◽  
Dookie Kim
Keyword(s):  
Ground Motion ◽  
Structural Response ◽  
Tuned Mass Damper ◽  
Frequency Characteristics ◽  
Building Frames ◽  
Concrete Frame ◽  
Finite Element Software ◽  
Mass Damper ◽  
Lateral Displacements ◽  
Modal Mass

This paper investigates the performance of tuned mass damper (TMD) and dynamic behavior of TMD-controlled concrete structure considering the ground motion (GM) characteristics based on frequency content. The effectiveness of TMD in reducing the structural response and probability of collapse of the building frames are affected by the frequency characteristics of GMs. To attenuate the seismic vibration of the buildings, the TMD controlled building has been designed based on the modal analysis (modal frequencies and modal mass participation ratio). In this study, to investigate the performance of TMD, four different heights (i.e., 3, 5, 10, 20 stories) inelastic concrete moment-resisting frames equipped with TMDs are developed using an open-source finite element software. A series of numerical analyses have been conducted using sixty earthquakes classified into three categories corresponding to low, medium, and high-frequency characteristics of GMs. To evaluate the proposed strategy, peak lateral displacements, inter-story drift, and the probability of collapse using fragility analysis have been investigated through the structures equipped with and without TMD. The results appraise the effect of TMD and compare the seismic responses of earthquake frequency contents and the vibration control system of the inelastic building frames.

Sign in / Sign up

Export Citation Format

Share Document