Low pressure plasma modifications for the generation of hydrophobic coatings for biomaterials applications

2018 ◽  
Vol 15 (9) ◽  
pp. 1800059 ◽  
Author(s):  
Kim S. Siow
Keyword(s):  
Low Pressure ◽  
Hydrophobic Coatings ◽  
Pressure Plasma ◽  
Low Pressure Plasma

scholarly journals Hydrophobic Leather Coating for Footwear Applications by a Low-Pressure Plasma Polymerisation Process

Polymers ◽  
2021 ◽  
Vol 13 (20) ◽  
pp. 3549
Author(s):  
Carlos Ruzafa Silvestre ◽  
María Pilar Carbonell Blasco ◽  
Saray Ricote López ◽  
Henoc Pérez Aguilar ◽  
María Ángeles Pérez Limiñana ◽  
...  
Keyword(s):  
Photoelectron Spectroscopy ◽  
Low Pressure ◽  
Water Repellent ◽  
Functional Coatings ◽  
Water Contact ◽  
Hydrophobic Coatings ◽  
Pressure Plasma ◽  
Colour Measurements ◽  
Low Pressure Plasma ◽  
Plasma Polymerisation

The aim of this work is to develop hydrophobic coatings on leather materials by plasma polymerisation with a low-pressure plasma system using an organosilicon compound, such as hexamethyldisiloxane (HMDSO), as chemical precursor. The hydrophobic coatings obtained by this plasma process were evaluated with different experimental techniques such as Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM) and standardised tests including colour measurements of the samples, surface coating thickness and water contact angle (WCA) measurements. The results obtained indicated that the monomer had polymerised correctly and completely on the leather surface creating an ultra-thin layer based on polysiloxane. The surface modification produced a water repellent effect on the leather that does not alter the visual appearance and haptic properties. Therefore, the application of the plasma deposition process showed promising results that makes it a more sustainable alternative to conventional functional coatings, thus helping to reduce the use of hazardous chemicals in the finishing process of footwear manufacturing.

Characteristics of Low Pressure Plasma Sprayed Alumina Coating

2009 ◽  
Vol 24 (1) ◽  
pp. 117-121 ◽  
Author(s):  
Chun-Ming DENG ◽  
Ke-Song ZHOU ◽  
Min LIU ◽  
Chang-Guang DENG ◽  
Jin-Bing SONG ◽  
...  
Keyword(s):  
Low Pressure ◽  
Alumina Coating ◽  
Pressure Plasma ◽  
Low Pressure Plasma ◽  
Plasma Sprayed

scholarly journals Effect of Low-Pressure Plasma Treatment Parameters on Wrinkle Features

Materials ◽  
2020 ◽  
Vol 13 (17) ◽  
pp. 3852
Author(s):  
Bongjun Gu ◽  
Dongwook Ko ◽  
Sungjin Jo ◽  
Dong Choon Hyun ◽  
Hyeon-Ju Oh ◽  
...  
Keyword(s):  
Power Flow ◽  
Treatment Time ◽  
Argon Plasma ◽  
Negative Ions ◽  
Low Pressure ◽  
Nitrogen Plasma ◽  
Pressure Plasma ◽  
Positive Ions ◽  
Low Pressure Plasma ◽  
Optical Adhesive

Wrinkles attract significant attention due to their ability to enhance the mechanical and optical characteristics of various optoelectronic devices. We report the effect of the plasma gas type, power, flow rate, and treatment time on the wrinkle features. When an optical adhesive was treated using a low-pressure plasma of oxygen, argon, and nitrogen, the oxygen and argon plasma generated wrinkles with the lowest and highest wavelengths, respectively. The increase in the power of the nitrogen and oxygen plasma increased the wavelengths and heights of the wrinkles; however, the increase in the power of the argon plasma increased the wavelengths and decreased the heights of the wrinkles. Argon molecules are heavier and smaller than nitrogen and oxygen molecules that have similar weights and sizes; moreover, the argon plasma comprises positive ions while the oxygen and nitrogen plasma comprise negative ions. This resulted in differences in the wrinkle features. It was concluded that a combination of different plasma gases could achieve exclusive control over either the wavelength or the height and allow a thorough analysis of the correlation between the wrinkle features and the characteristics of the electronic devices.

scholarly journals Effect of H2O-Based Low-Pressure Plasma (LPP) Treatment on the Germination of Bambara Groundnut Seeds

Agronomy ◽  
2021 ◽  
Vol 11 (2) ◽  
pp. 338
Author(s):  
Naeem Ahmed ◽  
Asad Masood ◽  
Kim S. Siow ◽  
M. F. Mohd Razip Wee ◽  
Rahmat Zaki Auliya ◽  
...  
Keyword(s):  
Food Security ◽  
Seed Germination ◽  
Chemical Modification ◽  
Low Pressure ◽  
Germination Percentage ◽  
Bambara Groundnut ◽  
Pressure Plasma ◽  
Low Pressure Plasma ◽  
Amine Groups

In general, seed germination is improved by low-pressure plasma (LPP) treatment using precursors such as air, nitrogen, argon, or water (H2O). Here, H2O-based LPP treatment using the optimized parameters of 10 W and 10 s improves the germination of Bambara groundnut seeds by 22%. LPP increases the wettability and roughness of the seed hilum while oxidizing the surface with carboxyl and amine groups. In this H2O-based treatment of Bambara groundnut seeds, combinatory etching and chemical modification facilitated the imbibition process and increased the germination percentage. The success of this method has the potential to be scaled up to solve food security with seeds otherwise facing germination-related issues.

On the adhesion of diamond‐like carbon coatings deposited by low‐pressure plasma on 316L stainless steel

2021 ◽  
Author(s):  
Gabriel Morand ◽  
Pascale Chevallier ◽  
Linda Bonilla‐Gameros ◽  
Stéphane Turgeon ◽  
Maxime Cloutier ◽  
...  
Keyword(s):  
Stainless Steel ◽  
316L Stainless Steel ◽  
Low Pressure ◽  
Diamond Like Carbon ◽  
Carbon Coatings ◽  
Pressure Plasma ◽  
Low Pressure Plasma

The effect of low-pressure plasma treatment of seeds on the plant resistance to pathogens and crop yields

2020 ◽  
Vol 53 (24) ◽  
pp. 244001 ◽  
Author(s):  
Irina Filatova ◽  
Veronika Lyushkevich ◽  
Svetlana Goncharik ◽  
Alexander Zhukovsky ◽  
Natalia Krupenko ◽  
...  
Keyword(s):  
Plasma Treatment ◽  
Plant Resistance ◽  
Crop Yields ◽  
Low Pressure ◽  
Pressure Plasma ◽  
Low Pressure Plasma
Sign in / Sign up

Export Citation Format

Share Document