Enhanced mechanical properties of graphene/natural rubber nanocomposites at low content

2014 ◽  
Vol 63 (9) ◽  
pp. 1674-1681 ◽  
Author(s):  
Wang Xing ◽  
Jinrong Wu ◽  
Guangsu Huang ◽  
Hui Li ◽  
Maozhu Tang ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Natural Rubber ◽  
Rubber Nanocomposites

The Mechanical Properties of Modified Attapulgite Reinforced Nature Rubber and Styrene-Butadiene Rubber Nanocomposites

2010 ◽  
Vol 150-151 ◽  
pp. 762-765
Author(s):  
Ji Hu Wang ◽  
Hong Bo Liu ◽  
Shao Guo Wen ◽  
Yan Shen
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Natural Rubber ◽  
Coupling Agent ◽  
Styrene Butadiene Rubber ◽  
Butadiene Rubber ◽  
The Matrix ◽  
Modified Attapulgite ◽  
Rubber Nanocomposites ◽  
Styrene Butadiene

Attapulgite (AT)/natural rubber (NR)/ styrene-butadiene rubber (SBR) nanocomposites have been prepared after attapulgite was modified by different coupling agent. The treatment of AT caused the adhesion between AT nanorods and the nature rubber/styrene-butadiene rubber was improved, which enhanced the tensile properties of the matrix. The tensile strength of composites attained 15.6 MPa after AT was modified by 3%wt Si-69 coupling with addition of 20 phr.

Mechanical properties of natural rubber nanocomposites reinforced with high aspect ratio cellulose nanocrystals isolated from soy hulls

2016 ◽  
Vol 153 ◽  
pp. 143-152 ◽  
Author(s):  
Wilson Pires Flauzino Neto ◽  
Marcos Mariano ◽  
Ingrid Souza Vieira da Silva ◽  
Hudson Alves Silvério ◽  
Jean-Luc Putaux ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Aspect Ratio ◽  
Natural Rubber ◽  
Cellulose Nanocrystals ◽  
High Aspect Ratio ◽  
Soy Hulls ◽  
Rubber Nanocomposites

scholarly journals Mechanical Properties of Natural Rubber Nanocomposites Filled with Thermally Treated Attapulgite

2013 ◽  
Vol 2013 ◽  
pp. 1-11 ◽  
Author(s):  
Jihu Wang ◽  
Dajun Chen
Keyword(s):  
Mechanical Properties ◽  
Natural Rubber ◽  
Curing Process ◽  
Immiscible Blends ◽  
Microscope Images ◽  
Different Types ◽  
Modified Attapulgite ◽  
Rubber Nanocomposites ◽  
Thermal Stability Of ◽  
Scanning Electron

Natural rubber (NR) nanocomposites were prepared in a double-roller plasticator mixer with purified attapulgite (PAT) or modified attapulgite, which was treated at 450°C (PAT-450) and 850°C (PAT-850) for two hours. The structures of the pristine, purified, and modified attapulgite were characterized by FTIR, TEM, XRD, and BET. The results indicated that the structure of attapulgite changed with the increased temperature. The effects of the PAT treatment and content on the mechanical properties of the NR nanocomposites were also investigated. The results showed that AT increased curing process of natural rubber. A significant improvement in the tensile strength, wearability, and solvent resistance of the nanocomposites was observed with the addition of different types of attapulgite as compared to those of pure NR. Scanning electron microscope images showed that the filler was located at the interface, which induced compatibilization in the immiscible blends. Thermogravimetric analysis revealed a significant improvement in the thermal stability of the NR/PAT nanocomposites.

Natural Rubber and Rubber Blend Nanocomposites

2017 ◽  
pp. 77-105
Author(s):  
Anyaporn Boonmahitthisud
Keyword(s):  
Mechanical Properties ◽  
Thermal Stability ◽  
Natural Rubber ◽  
Average Diameter ◽  
Inorganic Nanoparticles ◽  
Rubber Matrix ◽  
Styrene Butadiene Rubber ◽  
Butadiene Rubber ◽  
Microemulsion Polymerization ◽  
Rubber Nanocomposites

Natural rubber (NR) is representative biomass polymer and the effective uses are strongly contributed to sustainable society. This chapter presents the innovative and advanced rubber nanocomposites with polystyrene-encapsulated silica nanohybrids (PS-nSiO2) subsequently used as a nanofiller for NR and NR/styrene butadiene rubber (NR/SBR). The PS-nSiO2 were prepared via ‘in situ' differential microemulsion polymerization. The core-shell nanohybrids of PS-nSiO2 were achieved with an average diameter of 40 nm using a smaller amount of surfactant, compared to microemulsion polymerization method. Moreover, the effects of the NR and NR/SBR filled with PS-nSiO2 nanohybrids on the mechanical properties, thermal stability, flammability and morphology are also discussed. The results indicated that the encapsulation of nSiO2 with PS can provide not only the well-dispersion of nanoparticles in the rubber matrix but also the synergistic properties of two components from the polymer and the inorganic nanoparticles by improving mechanical properties, thermal stability and flammability of rubber nanocomposites.

Mechanical Properties of Vulcanized Natural Rubber Nanocomposites Containing Functional Ceramic Nanoparticles

2013 ◽  
Vol 5 (6) ◽  
pp. 637-646 ◽  
Author(s):  
F. S. Bellucci ◽  
E. R. Budemberg ◽  
M. A. L. Nobre ◽  
J. A. De Saja ◽  
R. F. Aroca ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Natural Rubber ◽  
Ceramic Nanoparticles ◽  
Rubber Nanocomposites ◽  
Functional Ceramic
Sign in / Sign up

Export Citation Format

Share Document