An investigation into the relationship between the impact performance of rotationally molded polyethylene products and their dynamic mechanical properties

2003 ◽  
Vol 43 (4) ◽  
pp. 905-918 ◽  
Author(s):  
Louise Therese Pick ◽  
Eileen Harkin-Jones
Keyword(s):  
Mechanical Properties ◽  
Dynamic Mechanical Properties ◽  
Impact Performance ◽  
Dynamic Mechanical ◽  
The Impact ◽  
The Relationship

scholarly journals Dynamic Mechanical Compression Impulse of Lithium-Ion Pouch Cells

Energies ◽  
2020 ◽  
Vol 13 (8) ◽  
pp. 2105 ◽  
Author(s):  
Alon Ratner ◽  
Richard Beaumont ◽  
Iain Masters
Keyword(s):  
Mechanical Properties ◽  
Strain Rate ◽  
Strain Rate Sensitivity ◽  
Lithium Ion ◽  
Rate Sensitivity ◽  
Dynamic Mechanical Properties ◽  
Impact Testing ◽  
Significant Feature ◽  
Dynamic Mechanical ◽  
The Impact

Strain rate sensitivity has been widely recognized as a significant feature of the dynamic mechanical properties of lithium-ion cells, which are important for their accurate representation in automotive crash simulations. This research sought to improve the precision with which dynamic mechanical properties can be determined from drop tower impact testing through the use of a diaphragm to minimize transient shock loads and to constrain off-axis motion of the indenter, specialized impact absorbers to reduce noise, and observation of displacement with a high speed camera. Inert pouch cells showed strain rate sensitivity in an increased stiffness during impact tests that was consistent with the poromechanical interaction of the porous structure of the jellyroll with the liquid electrolyte. The impact behaviour of the inert pouch cells was similar to that of an Expanded Polypropylene foam (EPP), with the exception that the inert pouch cells did not show hysteretic recovery under the weight of the indenter. This suggests that the dynamic mechanical behaviour of the inert pouch cells is analogous to a highly damped foam.

scholarly journals Dynamic Fracture Experiment of Fractured Rock under Dynamic Loading

2020 ◽  
Vol 2020 ◽  
pp. 1-22
Author(s):  
Yanbing Wang ◽  
Xingyuan Zhou ◽  
Ji Kong ◽  
Bingbing Yu
Keyword(s):  
Mechanical Properties ◽  
Energy Loss ◽  
Dynamic Loading ◽  
Split Hopkinson Pressure Bar ◽  
Fractured Rock ◽  
Dynamic Mechanical Properties ◽  
Dynamic Crack ◽  
Loading Test ◽  
Dynamic Mechanical ◽  
The Impact

In order to examine the dynamic mechanical properties, dynamic crack proposition process, and energy loss of fractured rock under dynamic loading, the specimens with different fracture dig angles were processed with Φ50 mm × 50 mm cylindrical sandstone, the impact loading test was conducted on 50 mm stem diameter split Hopkinson pressure bar (SHPB) experiment platform, and the whole process of crack propagation and dynamic failure was recorded using a high-speed camera. As a result, the dynamic mechanical properties such as stress wave fluctuation characteristics, peak strength and stress-strain relationship, crack initiation angle, stress and other dependencies with prefabricated fracture angle of the prefabricated fracture specimens under high strain rate were obtained, and the incident energy, absorbed energy, and energy absorption rates were compared to investigate the energy loss law in the dynamic loading; on the contrary, the effects of different loading rates on the dynamic mechanical properties of the sandstone specimens were identified, and finally a set of findings were presented.

scholarly journals Influence of Cyclic Impact Loading and Axial Stress on Dynamic Mechanical Properties of Burst-Prone Coal

2021 ◽  
Vol 2021 ◽  
pp. 1-10 ◽  
Author(s):  
Shuang Gong ◽  
Zhen Wang ◽  
Lei Zhou ◽  
Wen Wang
Keyword(s):  
Mechanical Properties ◽  
Impact Loading ◽  
Coal Sample ◽  
Impact Load ◽  
Axial Stress ◽  
Dynamic Mechanical Properties ◽  
Dynamic Mechanical ◽  
Cyclic Impact Loading ◽  
Cyclic Impact ◽  
The Impact

High in-situ stress and frequent dynamic disturbances caused by the mining process in deep coal mines can easily induce dynamic disasters such as coal burst. We conducted laboratory experiments to assess the effects of the axial stress loading and dynamic cyclic impact loading on the dynamic mechanical properties of burst-prone coals by using a modified split Hopkinson pressure bar (SHPB). Comparisons were made using two types of burst-prone and burst-resistant coal samples. The mineral components, organic macerals, and dynamic mechanical features of both burst-prone and burst-resistant coal samples were comparatively analyzed based on the obtained X-ray diffraction (XRD), optical microscope observations, and dynamic compressive stress-strain curves, respectively. The results of the microstructure analysis indicated a larger difference between the minimum and maximum reflectances of vitrinite for burst-prone coal. Compared to the burst-resistant coal samples, the burst-prone coals contained less corpocollinite and fusinite. While applying a high axial static load combined with cyclic impact load, the coal samples showed the characteristics of fatigue damage. The results also demonstrated that preaxial stress affected the burst resistance of coal samples. The greater the preaxial stress was, the less the coal samples could withstand the dynamic cyclic impact load. In comparison to the burst-resistant coal sample, the burst-prone coal sample showed a larger dynamic compressive strength and a lower deformation. They were also more positively capable of the propagation and activation of the coal burst. We believe that the results of the study are conducive to further understanding of the distribution of microcomponents of burst-prone coals. The results are also beneficial for realizing the dynamic mechanical characteristics of burst-prone coals under the impact of cyclic dynamic load.

Experimental Study of Dynamic Mechanical Properties of Granite

2016 ◽  
Vol 858 ◽  
pp. 86-90 ◽  
Author(s):  
Zhen Ming Chen ◽  
Yue Xiao Li ◽  
Zheng Zhang
Keyword(s):  
Mechanical Properties ◽  
Dynamic Loading ◽  
Split Hopkinson Pressure Bar ◽  
Dynamic Strength ◽  
Dynamic Mechanical Properties ◽  
Static Tension ◽  
Loading Test ◽  
Dynamic Mechanical ◽  
Precompression Stress ◽  
The Impact

Based on the SHPB (Split Hopkinson Pressure Bar), the dynamic mechanical properties of the granite in the borehole have been tested separately. The data shows that the impact dynamic strength increases as the precompression stress increases and can reach its maximum when the precompression stress is about 50% of the static tension strength. Meanwhile, the coupled static and dynamic strength increases as well, and it could reach about three times of the static precompression stress and one and half times of the dynamic strength respectively. Also, the failure model of the coupled static and dynamic loading is tension failure, which is the same as the static tension and conventional dynamic loading test.

The Dynamic Mechanical Properties of Oxygen Free Copper under the Impact Load

2016 ◽  
Vol 1136 ◽  
pp. 543-548 ◽  
Author(s):  
Qing Feng Liu ◽  
Ning Chang Wang ◽  
Lan Yan ◽  
Feng Jiang ◽  
Hui Huang
Keyword(s):  
Mechanical Properties ◽  
Constitutive Model ◽  
Strain Rate ◽  
Power Law ◽  
Split Hopkinson Pressure Bar ◽  
True Strain ◽  
Dynamic Mechanical Properties ◽  
Experimental Result ◽  
Dynamic Mechanical ◽  
The Impact

The dynamic mechanical properties of oxygen free copper has been tested under the different strain rate (4700s-1~21000s-1) at the room temperature by split Hopkinson pressure bar (SHPB), the true stress-true strain curves has been obtained. Power-Law constitutive model and Johnson-Cook constitutive model have been built to fit the experimental result from SHPB test of oxygen free copper, meanwhile, the constitutive model can be applied to the simulation analysis of cutting process. The results show that the oxygen free copper is sensitive to the strain rate. In addition, the Johnson-Cook constitutive model predicts the plastic flow stress of the oxygen free copper more accurately than the Power-Law constitutive model at the high strain rate.

scholarly journals Experimental Study on Physical and Dynamic Mechanical Properties of Temperature-Water Coupled Sandstone

2021 ◽  
Vol 2021 ◽  
pp. 1-12
Author(s):  
Qi Ping ◽  
Dezhi Qi ◽  
Qi Diao ◽  
Chuanliang Zhang ◽  
Qi Gao ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Quadratic Function ◽  
Bath Temperature ◽  
Dynamic Mechanical Properties ◽  
Water Bath ◽  
Peak Strain ◽  
Impact Compression ◽  
Dynamic Mechanical ◽  
The Impact ◽  
Temperature Water

In order to study the influence characteristics of water bath at different temperatures on rock physical and dynamic mechanical properties, a total of 15 groups of temperature-water bath treatment were carried out on coal mine roadway sandstone at 25°C∼95°C, and the basic physical parameters were tested. The impact compression test was carried out using the split Hopkinson pressure bar (SHPB) device. The results show that, with the increase of water bath temperature, the particle gap on the specimen surface increases. The volume, mass, and density of the specimens all increased with the increase of water bath temperature, and the increase was closely related to the water bath temperature. The dynamic compressive strength increases as a quadratic function of the water bath temperature, and the rate of increase is different before and after 45°C. The dynamic peak strain and average strain rate showed a quadratic function with the water bath temperature. The dynamic peak strain before 45°C decreased with the temperature increasing, and the dynamic peak strain after 45°C increased with the temperature increasing. The dynamic elastic modulus increased first and then decreased with the increase of water bath temperature and reached the maximum at 45°C. The failure pattern of sandstone is spalling. With the increase of water bath temperature, the fracture degree of the specimen gradually decreases.

Young's Modulus and Dynamic Mechanical Properties of San Resins Modified with Ethylene-Propylene Rubber

1978 ◽  
Vol 51 (4) ◽  
pp. 655-667 ◽  
Author(s):  
A. Brancaccio ◽  
L. Gargani ◽  
G. P. Giuliani
Keyword(s):  
Mechanical Properties ◽  
Young’S Modulus ◽  
Young's Modulus ◽  
Dynamic Mechanical Properties ◽  
Ethylene Propylene ◽  
Dynamic Mechanical ◽  
Styrene Copolymer ◽  
Wide Range ◽  
Main Transition ◽  
The Relationship

Abstract The dependence of Young's modulus and dynamic mechanical properties of a new high impact resin, ATS (acrylonitrile-styrene copolymer polymerized in the presence of ethylene-propylene-triene terpolymer), on the composition and morphology of the dispersed phase is examined and compared to that of ABS resins (acrylonitrile-styrene copolymer polymerized in presence of polybutadiene). The relationship between modulus and composition is different for the two resins because of the different morphology of the rubbery phases. The experimental results are compared to the predictions of several mathematical models. This analysis is extended to the dynamic moduli E′ and E″, measured over a wide range of temperatures covering the main transition of the rubbery phases.

Sign in / Sign up

Export Citation Format

Share Document