Molecular weight and concentration of poly (acrylic acid) dual‐responsive homogeneous and intrafibrillar collagen mineralization using an in situ co‐organization strategy

2021 ◽  
Author(s):  
Lirui Shen ◽  
Honghong Bu ◽  
Yuanzhi Zhang ◽  
Pingping Tang ◽  
Guoying Li
Keyword(s):  
Molecular Weight ◽  
Acrylic Acid ◽  
Dual Responsive ◽  
Organization Strategy ◽  
Collagen Mineralization ◽  
Poly Acrylic Acid

Synthesis of poly(methyl methacrylate)-b-poly(acrylic acid) by DPE method

e-Polymers ◽  
2008 ◽  
Vol 8 (1) ◽  
Author(s):  
Dong Chen ◽  
Ruixue Liu ◽  
Zhifeng Fu ◽  
Yan Shi
Keyword(s):  
Molecular Weight ◽  
Acrylic Acid ◽  
Methyl Methacrylate ◽  
Diblock Copolymer ◽  
Self Assembly ◽  
Gel Permeation Chromatography ◽  
Amphiphilic Diblock Copolymer ◽  
Poly Methyl Methacrylate ◽  
Copolymer Poly ◽  
Poly Acrylic Acid

AbstractAmphiphilic diblock copolymer poly(methyl methacrylate)-b-poly(acrylic acid) (PMMA-b-PAA) was prepared by 1,1-diphenylethene (DPE) method. Firstly, free radical polymerization of methyl methacrylate was carried out with AIBN as initiator in the presence of DPE, giving a DPE-containing PMMA precursor with controlled molecular weight. tert-Butyl acrylate (tBA) was then polymerized in the presence of the PMMA precursor, and PMMA-b-PtBA diblock copolymer with controlled molecular weight was prepared. Finally, amphiphilic diblock copolymer PMMA-b-PAA was obtained by hydrolysis of PMMA-b-PtBA. The formation of PMMA-b-PAA was confirmed by 1H NMR spectrum and gel permeation chromatography. Transmission electron microscopy and dynamic light scattering were used to detect the self-assembly behavior of the amphiphilic diblock polymers in methanol.

Low molecular weight poly(acrylic acid) as a salt scaling inhibitor in oilfield operations

2005 ◽  
Vol 2 (3) ◽  
pp. 212-219 ◽  
Author(s):  
S. Moulay ◽  
M. Boukherissa ◽  
F. Abdoune ◽  
F. Z. Benabdelmoumene
Keyword(s):  
Molecular Weight ◽  
Acrylic Acid ◽  
Low Molecular Weight ◽  
Salt Scaling ◽  
Oilfield Operations ◽  
Poly Acrylic Acid

scholarly journals The Anomalous Influence of Polyelectrolyte Concentration on the Deposition and Nanostructure of Poly(ethyleneimine)/Poly(acrylic acid) Multilayers

Molecules ◽  
2019 ◽  
Vol 24 (11) ◽  
pp. 2141 ◽  
Author(s):  
Martin Müller
Keyword(s):  
Acrylic Acid ◽  
Attenuated Total Reflection ◽  
Silicon Substrates ◽  
Acid Base ◽  
Exponential Relationship ◽  
Individual Adsorption ◽  
The Individual ◽  
Poly Acrylic Acid

The deposition and nanostructure of polyelectrolyte (PEL) multilayers (PEMs) of branched poly(ethyleneimine)/poly(acrylic acid) (PEI/PAA) onto silicon substrates was studied in terms of the dependence of pH and the PEL concentration (cPEL) in the individual adsorption steps z. Both a commercial automatic dipping device and a homebuilt automatic stream coating device (flow cell) were used. Gravimetry, SFM, transmission (TRANS) and in situ attenuated total reflection (ATR) FTIR spectroscopy were used for the quantitative determination of the adsorbed amount, thickness, chemical composition and morphology of deposited PEMs, respectively. Firstly, the combination of pH = 10 for PEI and pH = 4 for PAA, where both PEL were predominantly in the neutral state, resulted in an extraordinarily high PEM deposition, while pH combinations, where one PEL component was charged, resulted in a significantly lower PEM deposition. This was attributed to both PEL conformation effects and acid/base interactions between basic PEI and acidic PAA. Secondly, for that pH combination an exponential relationship between PEM thickness and adsorption step z was found. Thirdly, based on the results of three independent methods, the course of the deposited amount of a PEM-10 (z = 10) versus cPEL in the range 0.001 to 0.015 M at pH = 10/4 was non-monotonous showing a pronounced maximum at cPEL = 0.005 M. Analogously, for cPEL = 0.005 M a maximum of roughness and structure size was found. Fourthly, related to that finding, in situ ATR-FTIR measurements gave evidence for the release of outermost located PEI upon PAA immersion (even step) and of outermost PAA upon PEI immersion (odd step) under formation of PEL complexes in solution. These studies help us to prepare PEL-based films with a defined thickness and morphology for interaction with biofluids in the biomedical and food fields.

scholarly journals Effects Of Environmental Factors On The Dispersion Behavior Of Iron Oxide In Aqueous Solutions With Poly Acrylic Acid

2015 ◽  
Vol 60 (2) ◽  
pp. 1561-1564
Author(s):  
E.-H. Lee ◽  
K.-M. Kim ◽  
W.-Y. Maeng ◽  
D.-H. Hur
Keyword(s):  
Molecular Weight ◽  
Acrylic Acid ◽  
High Molecular Weight ◽  
Low Molecular Weight ◽  
Solution Ph ◽  
Molecular Weights ◽  
Aqueous Suspensions ◽  
Magnetite Particles ◽  
The Stability ◽  
Poly Acrylic Acid

Abstract After preparing aqueous suspensions from magnetite particles with a poly-acrylic acid, we investigated the effects of several experimental parameters. We characterized the stability of the suspensions using visual inspection, sedimentation, adsorption, and thermal stability of the dispersant. The dispersion stability is affected by the solution pH, the concentrations of magnetite particles, the molecular weight, the concentration of the dispersants, and the temperature. The stability of the suspensions increased as the concentration of the dispersant and the temperature increased. In terms of the molecular weights of the dispersant, the suspensions with dispersant of low-molecular weight (1800) were more stable than those of high-molecular weight (250000) at room temperature. However, at high temperature the suspensions with high-molecular weight showed stability. The adsorption efficiency of the dispersant was very low. The dispersant of high-molecular weight showed a higher thermal integrity than that of low-molecular weight. From this work, we obtained the optimum conditions for stable aqueous suspensions of magnetite particles.

Sign in / Sign up

Export Citation Format

Share Document