Reinforced mechanical properties and heat resistance of recycled acrylonitrile‐butadiene‐styrene/anhydrous zinc chloride coordination composites

2021 ◽  
Author(s):  
Yingqing Wang ◽  
Pengying Liu ◽  
Qiuying Li ◽  
Chifei Wu
Keyword(s):  
Mechanical Properties ◽  
Heat Resistance ◽  
Zinc Chloride ◽  
Acrylonitrile Butadiene Styrene ◽  
Anhydrous Zinc Chloride ◽  
Butadiene Styrene

Structure and properties of heat-resistant ABS resins innovated via MSAMI random copolymer

2021 ◽  
pp. 089270572110441
Author(s):  
BY Hou ◽  
L Ren ◽  
YN Sun ◽  
MY Zhang ◽  
HX Zhang
Keyword(s):  
Mechanical Properties ◽  
Heat Resistance ◽  
Acrylonitrile Butadiene Styrene ◽  
Random Copolymer ◽  
Softening Temperature ◽  
Fracture Morphology ◽  
Structure And Properties ◽  
Heat Resistant ◽  
Abs Resin ◽  
Butadiene Styrene

This work proposed an efficient method to synthesize acrylonitrile-butadiene-styrene (ABS) copolymer and α-Methylstyrene (α-MSt)/N-phenylmaleimide (NPMI)/Acrylonitrile (AN) (MSAMI) random copolymer via emulsion polymerization, aiming to combine the excellent heat resistance of MSAMI and numerous advantages of ABS resin including mechanical properties, processing and recyclability. The effects of the MSAMI content and α-MSt/AN ratio on the thermal performance, mechanical properties and the morphology of heat-resistant ABS were investigated by FITR, dynamic mechanical analyses (DMA), Vicat Softening Temperature (VST), Thermogravimetric Analysis (TGA) and Scanning Electron Microscope (SEM). As a result, the heat-resistant of ABS resin was obviously enhanced by MSAMI, and its glass transition temperature (Tg) could be extended with the increase of NPMI content. The Tg could reach 173°C when NPMI content was 20% at the same trend as the VST. Synthetically, the contradiction between the heat resistance and mechanical properties of ABS resin reached a good balance when the NPMI content was 15% and α-MSt/AN ratio was 69/31. In SEM, the fracture morphology of the heat-resistant ABS resin was gradually tended to be smooth with the increase of the NPMI content. Therefore, the MSAMI random copolymer was successful prepared, which provided insight for the synthesis of heat-resistant modifiers and promoted the potential application of heat-resistant modifiers in automobiles and aircraft.

Surface microencapsulation modification of aluminum hypophosphite and improved flame retardancy and mechanical properties of flame-retardant acrylonitrile–butadiene–styrene composites

RSC Advances ◽  
2015 ◽  
Vol 5 (61) ◽  
pp. 49143-49152 ◽  
Author(s):  
Ningjing Wu ◽  
Zhaoxia Xiu
Keyword(s):  
Mechanical Properties ◽  
Impact Strength ◽  
Flame Retardant ◽  
Flame Retardancy ◽  
Acrylonitrile Butadiene Styrene ◽  
Aluminum Hypophosphite ◽  
Butadiene Styrene

Silicone-microencapsulated aluminum hypophosphite (SiAHP) improved effectively the flame retardancy and significantly enhanced the notched impact strength of ABS/SiAHP composites.

Effect of Graphite Content on The Mechanical Properties of Acrylonitrile-Butadiene-Styrene (ABS)

2019 ◽  
Vol 383 (1) ◽  
pp. 1800018 ◽  
Author(s):  
Natália Ferreira Braga ◽  
Fabio Roberto Passador ◽  
Eduardo Saito ◽  
Fernando Henrique Cristovan
Keyword(s):  
Mechanical Properties ◽  
Acrylonitrile Butadiene Styrene ◽  
Graphite Content ◽  
Butadiene Styrene

Development of a gripper for garment handling designed for additive manufacturing

2019 ◽  
pp. 095440621985776
Author(s):  
Michal Jilich ◽  
Mattia Frascio ◽  
Massimiliano Avalle ◽  
Matteo Zoppi
Keyword(s):  
Mechanical Properties ◽  
Additive Manufacturing ◽  
Acrylonitrile Butadiene Styrene ◽  
Cost Effective ◽  
Lower Number ◽  
Polybutylene Terephthalate ◽  
Design Validation ◽  
Polymeric Additive ◽  
Lower Complexity ◽  
Butadiene Styrene

The paper presents how a robotic gripper specific for grasping and handling of textiles and soft flexible layers can be miniaturized and improved by polymeric additive manufacturing-oriented re-design. Advantages of polymeric additive manufacturing are to allow a re-design of components with integrated functions, to be cost-effective equipment for small batches production and the availability of suitable materials for many applications. The drawback is that for design validation extended testing is still necessary because of lacks in standardization and that the mechanical properties are building parameters dependent. The outcomes are a lower complexity of the design overall and lower number of components. These are pursued taking advantage of the anisotropy of the additive manufacturing processed polymer and assigning appropriate shapes and linkages in the mechanisms. Set of common materials (polylactide, polyethylene terephthalate, acrylonitrile butadiene styrene) and technical (acrylonitrile styrene acrylate, polycarbonate/polybutylene terephthalate blend) are tested to obtain data for the modelling.

Investigation of Recycled Acrylonitrile Butadiene Styrene for Additive Manufacturing

2020 ◽  
pp. 130-154
Author(s):  
Shajahan Bin Maidin ◽  
Zulkeflee Abdullah ◽  
Ting Kung Hieng
Keyword(s):  
Mechanical Properties ◽  
Test Specimen ◽  
Fused Deposition Modeling ◽  
Acrylonitrile Butadiene Styrene ◽  
Travel Speed ◽  
Fused Deposition ◽  
Deposition Modeling ◽  
Printing Processes ◽  
Butadiene Styrene

One of the disadvantages of fused deposition modeling (FDM) is waste produced during the printing processes. This investigation focuses on using 100% recycled Acrylonitrile Butadiene Styrene (ABS) for the FDM process. The recycling begins with re-granule the waste ABS material and produces it into a new filament. The new recycled filament was used to print the test specimen. Investigation on the mechanical properties and the surface quality of the test specimen and comparison with standard ABS specimen was done. The result shows that the recycled ABS can be produced into filament with 335°C of extrusion temperature and 1.5 mm/s travel speed of the extruder conveyor. The surface roughness of recycled specimen is 6.94% higher than the standard ABS specimen. For ultimate tensile strength, there is a small difference in X and Y orientation between the standard and the recycled ABS specimen which are 22.93% and 19.98%, respectively. However, in Z orientation, it is 52.33% lower. This investigation proves that ABS can be recycled without significantly affecting its mechanical properties.

Flow Behavior of Composites of PA6/Kaolin Nanoparticles

2014 ◽  
Vol 703 ◽  
pp. 45-50
Author(s):  
Chao Wang ◽  
Ying Chun Li ◽  
Guo Sheng Hu
Keyword(s):  
Mechanical Properties ◽  
Flow Behavior ◽  
Acrylonitrile Butadiene Styrene ◽  
Nylon 6 ◽  
Mechanical Analysis ◽  
Melt Blending ◽  
Styrene Maleic Anhydride ◽  
The Impact ◽  
Scanning Electron ◽  
Butadiene Styrene

The blends of Nylon 6/Acrylonitrile-Butadiene-Styrene (ABS) with styrene-maleic anhydride (SMA) was prepared by melt blending as the compatilizer. Mechanical properties, dynamic mechanical analysis (DMA) and fracture appearances were determined. It was found that the impact and tensile strength firstly increased and then decreased along with the increase of the SMA content. The properties reached maximum values when the content of SMA was 1.5%. The results of DMA and scanning electron microscope (SEM) indicated that the addition of SMA can effectively enhance the compatibility of Nylon 6 and ABS. Key words: Nylon 6, ABS, SMA, blends, modification

Effect of Compatibilizer and Flexibilizer on the Mechanical Properties of Acrylonitrile-Butadiene-Styrene)/Poly(Methyl Methacrylate) Blends

2014 ◽  
Vol 496-500 ◽  
pp. 317-321
Author(s):  
Shou Hai Wang ◽  
Jun Gao ◽  
Gu Ren Fei ◽  
Ping Zhang ◽  
Jun Huang ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Maleic Anhydride ◽  
Methyl Methacrylate ◽  
Acrylonitrile Butadiene Styrene ◽  
Screw Extruder ◽  
Polyolefin Elastomer ◽  
Twin Screw ◽  
Orthogonal Tests ◽  
Butadiene Styrene

Acrylonitrile-butadiene-styrene (ABS) / polymethyl methacrylate (PMMA) with the addition of maleic anhydride grafted polystyrene (KT-5) and polyolefin elastomer (POE) were melt processed in a co-rotating twin-screw extruder. The effect of KT-5 and POE content on the mechanical properties of ABS/PMMA was investigated. Experiment results indicate that KT-5 can improve the tensile strength and the composites are toughened effectively as the addition of POE. According to Orthogonal tests, it demonstrates that POE ha a greater effect on the blends than KT-5, and there exist no obvious interactivity between the two components.

Sign in / Sign up

Export Citation Format

Share Document