scholarly journals MgNb 2 O 6 Modified K 0.5 Na 0.5 NbO 3 Eco‐Piezoceramics: Scalable Processing, Structural Distortion and Complex Impedance at Resonance

ChemistryOpen ◽  
2021 ◽  
Vol 10 (8) ◽  
pp. 798-805
Author(s):  
Antonio Iacomini ◽  
Sebastiano Garroni ◽  
Nina Senes ◽  
Gabriele Mulas ◽  
Stefano Enzo ◽  
...  
Keyword(s):  
Complex Impedance ◽  
Structural Distortion ◽  
At Resonance

A Freeze-Etch Study of Acinetobacter SP. Grown on a Hydrocarbon Substrate

1974 ◽  
Vol 32 ◽  
pp. 174-175
Author(s):  
C. L. Scott ◽  
W. R. Finnerty
Keyword(s):  
Membrane System ◽  
Structural Distortion ◽  
Intracytoplasmic Membrane ◽  
Gram Negative ◽  
Sectioned Material ◽  
Acinetobacter Sp

Acinetobacter sp. HO-1-N, a gram-negative hydrocarbon oxidizing bacterium previously designated Micrococcus cerificans, has been shown to sequester the hydrocarbon into intracytoplasmic pools as a result of growth on this substrate. In hydrocarbon grown cells, an intracytoplasmic membrane system was also observed along with a doubling of cellular phospholipids (Z). However, using conventional dehydration and embedding procedures in preparing thin sectioned material, the hydrocarbon is extracted from the cells. This may lead to structural distortion, consequently, the freeze-etch technique was applied to preserve the integrity of the cell.

Effect of MCl (M = Na, K) addition on microstructure and electrical conductivity of forsterite

2020 ◽  
Vol 92 (1) ◽  
pp. 10901
Author(s):  
Saloua El Asri ◽  
Hamid Ahamdane ◽  
Lahoucine Hajji ◽  
Mohamed El Hadri ◽  
Moulay Ahmed El Idrissi Raghni ◽  
...  
Keyword(s):  
Heat Treatment ◽  
Electrical Conductivity ◽  
Single Phase ◽  
Sol Gel ◽  
Complex Impedance ◽  
Transmission Spectra ◽  
Electrical Measurements ◽  
Cation Type ◽  
Edx Analyses ◽  
The Fourier Transform

Forsterite single phase powder Mg2SiO4 was synthesized by sol–gel method alongside with heat treatment, using two different cation alkaline salts MCl as mineralizers (M = Na, K) with various mass percentages (2.5, 5, 7.5, and 10 wt.%). In this work, we report on the effect of the cation type and the added amount of used mineralizer on microstructure and electrical conductivity of Mg2SiO4. The formation of forsterite started at 680–740  °C and at 630–700  °C with KCl and NaCl respectively, as shown by TG-DTA and confirmed by XRD. Furthermore, the Fourier transform infrared (FTIR) transmission spectra indicated bands corresponding to vibrations of forsterite structure. The morphology and elemental composition of sintered ceramics were examined by SEM-EDX analyses, while their densities, which were measured by Archimedes method, increased with addition of both alkaline salts. The electrical measurements were performed by Complex Impedance Spectroscopy. The results showed that electrical conductivity increased with the addition of both mineralizers, which was higher for samples prepared with NaCl than those prepared with KCl.

Nickel(II)-Methyl Complexes Adopting Idealized Seesaw Geometries

2019 ◽  
Author(s):  
Ethan A. Hill ◽  
Norman Zhao ◽  
Alexander S. Filatov ◽  
John Anderson
Keyword(s):  
Singlet State ◽  
Strong Field ◽  
Structural Distortion ◽  
Computational Results ◽  
Threefold Symmetry ◽  
Chelating Ligand ◽  
Electronic Stabilization

We report four-coordinate nickel(II)-methyl complexes of tris-carbene borate ligands which adopt rare seesaw geometries. Experimental and computational results suggest the structural distortion from threefold symmetry results from a combination of electronic stabilization of the singlet state, strong field donors, and constrained angles from the chelating ligand.

A UHF Compact Complex Impedance-transforming Balun with High Isolation

2020 ◽  
Vol 13 (8) ◽  
pp. 1135-1144
Author(s):  
Kittipong Nithiporndecha ◽  
Chatrpol Pakasiri
Keyword(s):  
Complex Impedance ◽  
Output Port ◽  
Reflection Coefficients ◽  
Coupled Line ◽  
High Isolation ◽  
Line Structure ◽  
Source Impedance ◽  
Phase Balance ◽  
High Output

Background: A compact complex impedance-transforming balun for UHF frequencies, which is based on a coupled-line structure that matched all ports and provided high output port isolation, was designed in this paper. Methods: A lumped component transformation was used to minimize circuit size. The implemented circuit operated at 433 MHz with the reflection coefficients less than -16 dB at all ports, 0.22 dB amplitude balance and 180° phase balance at the output ports. The signal coupling between the output ports was -16.8 dB. The circuit size is small at 0.032λ. Results: Complex impedance-transforming baluns were designed to operate at 433 MHz. The source impedance at port 1 was set at Zs = 12 - j12Ω and the load impedances at port 2 and 3 were set at ZL = 80 + j30Ω. Conclusion: A compact complex impedance-transforming balun at UHF frequency, with all ports matched and high isolations, was designed and illustrated in this paper.

Primary involvement of K+ conductance in membrane resonance of trigeminal root ganglion neurons

1988 ◽  
Vol 59 (1) ◽  
pp. 77-89 ◽  
Author(s):  
E. Puil ◽  
B. Gimbarzevsky ◽  
I. Spigelman
Keyword(s):  
Electrical Properties ◽  
Channel Blocker ◽  
Complex Impedance ◽  
Membrane Potentials ◽  
K Channel ◽  
Bathing Medium ◽  
Trigeminal Root ◽  
Membrane Resonance ◽  
Ganglion Neurons ◽  
Impedance Magnitude

1. The complex impedances and impedance magnitude functions were obtained from neurons in in vitro slices of trigeminal root ganglia using frequency-domain analyses of intracellularly recorded voltage responses to specified oscillatory input currents. A neuronal model derived from linearized Hodgkin-Huxley-like equations was used to fit the complex impedance data. This procedure yielded estimates for membrane electrical properties. 2. Membrane resonance was observed in the impedance magnitude functions of all investigated neurons at their initial resting membrane potentials and was similar to that reported previously for trigeminal root ganglion neurons in vivo. Tetrodotoxin (10(-6) M), a Na+-channel blocker, applied in the bathing medium for 20 min produced only minor changes, if any, in the resonance, although gross impairment of Na+-spike electrogenesis was apparent in most of the neurons. Brief applications (1-5 min) of a K+-channel blocker, tetraethylammonium (TEA; 10(-2) M), increased the impedance magnitude and abolished, in a reversible manner, the resonant behavior. In all cases, the resonant frequency was decreased by TEA administration prior to total blockade of resonance. 3. The TEA-induced blockade of resonance was associated with decreases in the estimates of the membrane conductances, without significant alterations of input capacitance. A particularly large decrease was observed in Gr, the time-invariant resting conductance that includes a lumped leak conductance component. The voltage- and time-dependent conductance, GL, and associated relaxation time constant, tau u, also declined progressively during administration of TEA. 4. Systematic variations in the membrane potentials of trigeminal root ganglion neurons were produced by intracellular injections of long-lasting step currents with superposition of the oscillatory current stimuli, in order to assess the effects of TEA on the relationship of the electrical properties to the membrane potential. Applications of TEA led to a depolarizing shift in the dependence of the membrane property estimates, suggesting voltage-dependence of the effects of TEA on presumed K+ channels in the membrane. 5. These data suggest a primary involvement of K+ conductance in the genesis of membrane resonance. This electrical behavior or its ionic mechanism is a major modulator of the subthreshold electrical responsiveness of trigeminal root ganglion neurons.

scholarly journals Simulation of 2-Coil and 4-Coil Magnetic Resonance Wearable WPT Systems

Proceedings ◽  
2021 ◽  
Vol 68 (1) ◽  
pp. 13
Author(s):  
Yixuan Sun ◽  
Stephen Beeby
Keyword(s):  
Power Efficiency ◽  
Power Transmission ◽  
Rotation Angle ◽  
Wireless Power ◽  
Peak Efficiency ◽  
Frequency Splitting ◽  
At Resonance ◽  
Higher Power ◽  
The Impact ◽  
Proper Frequency

This paper presents the COMSOL simulations of magnetically coupled resonant wireless power transfer (WPT), using simplified coil models for embroidered planar two-coil and four-coil systems. The power transmission of both systems is studied and compared by varying the separation, rotation angle and misalignment distance at resonance (5 MHz). The frequency splitting occurs at short separations from both the two-coil and four-coil systems, resulting in lower power transmission. Therefore, the systems are driven from 4 MHz to 6 MHz to analyze the impact of frequency splitting at close separations. The results show that both systems had a peak efficiency over 90% after tuning to the proper frequency to overcome the frequency splitting phenomenon at close separations below 10 cm. The four-coil design achieved higher power efficiency at separations over 10 cm. The power efficiency of both systems decreased linearly when the axial misalignment was over 4 cm or the misalignment angle between receiver and transmitter was over 45 degrees.

scholarly journals Near-Field Scanning Millimeter-Wave Microscope Operating Inside a Scanning Electron Microscope: Towards Quantitative Electrical Nanocharacterization

2021 ◽  
Vol 11 (6) ◽  
pp. 2788
Author(s):  
Petr Polovodov ◽  
Didier Théron ◽  
Clément Lenoir ◽  
Dominique Deresmes ◽  
Sophie Eliet ◽  
...  
Keyword(s):  
Electron Microscope ◽  
Scanning Electron Microscope ◽  
Millimeter Wave ◽  
Radiation Effects ◽  
Near Field ◽  
Complex Impedance ◽  
Standard Operating Procedure ◽  
Critical Issue ◽  
Transverse Electromagnetic ◽  
Scanning Electron

The main objectives of this work are the development of fundamental extensions to existing scanning microwave microscopy (SMM) technology to achieve quantitative complex impedance measurements at the nanoscale. We developed a SMM operating up to 67 GHz inside a scanning electron microscope, providing unique advantages to tackle issues commonly found in open-air SMMs. Operating in the millimeter-wave frequency range induces high collimation of the evanescent electrical fields in the vicinity of the probe apex, resulting in high spatial resolution and enhanced sensitivity. Operating in a vacuum allows for eliminating the water meniscus on the tip apex, which remains a critical issue to address modeling and quantitative analysis at the nanoscale. In addition, a microstrip probing structure was developed to ensure a transverse electromagnetic mode as close as possible to the tip apex, drastically reducing radiation effects and parasitic apex-to-ground capacitances with available SMM probes. As a demonstration, we describe a standard operating procedure for instrumentation configuration, measurements and data analysis. Measurement performance is exemplarily shown on a staircase microcapacitor sample at 30 GHz.

Sign in / Sign up

Export Citation Format

Share Document