Effect of bone sialoprotein coated three-dimensional printed calcium phosphate scaffolds on primary human osteoblasts

2018 ◽  
Vol 106 (7) ◽  
pp. 2565-2575 ◽  
Author(s):  
Anja Klein ◽  
Andreas Baranowski ◽  
Ulrike Ritz ◽  
Hermann Götz ◽  
Sascha Heinemann ◽  
...  
Keyword(s):  
Calcium Phosphate ◽  
Three Dimensional ◽  
Bone Sialoprotein ◽  
Human Osteoblasts ◽  
Primary Human Osteoblasts

In vitro Growth Pattern of Primary Human Osteoblasts on Calcium Phosphate- and Polymethylmethacrylate-Based Bone Cement

2017 ◽  
Vol 58 (5-6) ◽  
pp. 216-226
Author(s):  
Johannes Schauwecker ◽  
Mark Bock ◽  
Florian Pohlig ◽  
Heinz Mühlhofer ◽  
Jutta Tübel ◽  
...  
Keyword(s):  
Cell Differentiation ◽  
Calcium Phosphate ◽  
Cell Viability ◽  
Proliferation Rate ◽  
Control Analysis ◽  
Implant Loosening ◽  
Human Osteoblasts ◽  
Apoptosis Rate ◽  
Primary Human Osteoblasts

Background/Purpose: Polymethylmethacrylate (PMMA) and calcium phosphate (Ca-P) cements are widely used for arthroplasty surgery and augmentation of bone defects. However, aseptic implant loosening in absence of wear-induced osteolysis indicates an unfavourable interaction between the cement surface and human osteoblasts. Our underlying hypothesis is that cement surfaces directly modify cell viability, proliferation rate, and cell differentiation. Methods: To test this hypothesis, we examined primary human osteoblasts harvested from six individuals. These cells were pooled and subsequently seeded directly on cement pellets prepared from Palacos® R, Palacos® R+G, and Norian® Drillable cements. After incubation for 24 and 72 h, cell viability, proliferation rate, apoptosis rate, and cell differentiation were analysed. Results: Upon cultivation of human osteoblasts on cement surfaces, we observed a significantly reduced cell viability and DNA content compared to the control. Analysis of the apoptosis rate revealed an increase for cells on Palacos R and Norian Drillable, but a significant decrease on Palacos R+G compared to the control. Regarding osteogenic differentiation, significantly lower values of alkaline phosphatase enzyme activity were identified for all cement surfaces after 24 and 72 h compared to cultivation on tissue culture plastic, serving as control. Conclusions: In summary, these data suggest a limited biocompatibility of both PMMA and Ca-P cements, necessitating further research to reduce unfavourable cell-cement interactions and consequently extend implant survival.

scholarly journals Evaluation of Bone Sialoprotein Coating of Three-Dimensional Printed Calcium Phosphate Scaffolds in a Calvarial Defect Model in Mice

Materials ◽  
2018 ◽  
Vol 11 (11) ◽  
pp. 2336 ◽  
Author(s):  
Andreas Baranowski ◽  
Anja Klein ◽  
Ulrike Ritz ◽  
Hermann Götz ◽  
Stefan Mattyasovszky ◽  
...  
Keyword(s):  
Calcium Phosphate ◽  
Bone Formation ◽  
Three Dimensional ◽  
Bone Substitutes ◽  
Bone Sialoprotein ◽  
Control Group ◽  
Calvarial Defect ◽  
Micro Computed Tomography ◽  
Bone Thickness ◽  
Local Bone

The bioactive coating of calcium phosphate cement (CPC) is a promising approach to enhance the bone-healing properties of bone substitutes. The purpose of this study was to evaluate whether coating CPCs with bone sialoprotein (BSP) results in increased bone formation. Forty-five female C57BL/6NRj mice with an average age of six weeks were divided into three groups. Either a BSP-coated or an uncoated three-dimensional plotted scaffold was implanted into a drilled 2.7-mm diameter calvarial defect, or the defect was left empty (control group; no CPC). Histological analyses revealed that BSP-coated scaffolds were better integrated into the local bone stock eight weeks after implantation. Bone volume/total volume (BV/TV) ratios and bone thickness at the bone–implant contact were analyzed via micro computed tomography (µCT) after eight weeks. BSP-coated scaffolds and uncoated CPC scaffolds increased bone thickness in comparison to the control (CPC + BSP: 691.1 ± 253.5 µm, CPC: 603.1 ± 164.4 µm, no CPC: 261.7 ± 37.8 µm, p < 0.01). Accordingly, BV/TV was enhanced in both scaffold groups (CPC + BSP: 1.3 ± 0.5%, CPC: 0.9 ± 0.5%, no CPC: 0.2 ± 0.3%, p < 0.01). The BSP coating showed a tendency towards an increased bone thickness (p = 0.18) and BV/TV (p = 0.18) in comparison to uncoated CPC scaffolds. However, a significant increase in bone formation through BSP coating was not found.

scholarly journals Influence of the Surface Roughness of PEEK GRF30 and Ti6Al4V SLM on the Viability of Primary Human Osteoblasts Determined by the MTT Test

Materials ◽  
2019 ◽  
Vol 12 (24) ◽  
pp. 4189 ◽  
Author(s):  
Piotr Prochor ◽  
Żaneta Anna Mierzejewska
Keyword(s):  
Surface Roughness ◽  
Bone Cells ◽  
Three Dimensional ◽  
Point Of View ◽  
Human Osteoblasts ◽  
Three Dimensional Printing ◽  
Variable Surface ◽  
Primary Human Osteoblasts ◽  
Medical Materials ◽  
Clinical Conditions

The aim of the study was to clearly determine whether selected modern medical materials and three dimensional printing allow for satisfactory viability of human osteoblasts, which is important from the point of view of the subsequent osseointegration process. Moreover, as implants are produced with various topography, the influence of surface roughness on viability of bone cells was evaluated. To conduct the research, primary human osteoblasts (PromoCell) were used. Cells were seeded on samples of glass-reinforced polyetheretherketone (30% of the filling), Ti6Al4V manufactured with the use of selective laser melting technology and forged Ti6Al4V with appropriately prepared variable surface roughness. To assess the viability of the tested cells the 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide was used. Results showed that all evaluated materials do not exhibit cytotoxic properties. Moreover, on their basis it can be concluded that there is a certain surface topography (designated i.a. as roughness equal to approx. Ra = 0.30 μm), which ensures the highest possible viability of human osteoblasts. On the basis of the received data, it can also be concluded that modern glass-reinforced polyetheretherketone or Ti6Al4V produced by rapid prototyping method allow to manufacture implants that should be effectively used in clinical conditions.

scholarly journals Biphasic Calcium Phosphate Biomaterials: Stem Cell-Derived Osteoinduction or In Vivo Osteoconduction? Novel Insights in Maxillary Sinus Augmentation by Advanced Imaging

Materials ◽  
2021 ◽  
Vol 14 (9) ◽  
pp. 2159
Author(s):  
Giovanna Iezzi ◽  
Antonio Scarano ◽  
Luca Valbonetti ◽  
Serena Mazzoni ◽  
Michele Furlani ◽  
...  
Keyword(s):  
Calcium Phosphate ◽  
Maxillary Sinus ◽  
Biphasic Calcium Phosphate ◽  
Calcium Phosphates ◽  
Three Dimensional ◽  
Sinus Augmentation ◽  
Native Bone ◽  
Maxillary Sinus Augmentation ◽  
Posterior Maxilla

Maxillary sinus augmentation is often necessary prior to implantology procedure, in particular in cases of atrophic posterior maxilla. In this context, bone substitute biomaterials made of biphasic calcium phosphates, produced by three-dimensional additive manufacturing were shown to be highly biocompatible with an efficient osteoconductivity, especially when combined with cell-based tissue engineering. Thus, in the present research, osteoinduction and osteoconduction properties of biphasic calcium-phosphate constructs made by direct rapid prototyping and engineered with ovine-derived amniotic epithelial cells or amniotic fluid cells were evaluated. More in details, this preclinical study was performed using adult sheep targeted to receive scaffold alone (CTR), oAFSMC, or oAEC engineered constructs. The grafted sinuses were explanted at 90 days and a cross-linked experimental approach based on Synchrotron Radiation microCT and histology analysis was performed on the complete set of samples. The study, performed taking into account the distance from native surrounding bone, demonstrated that no significant differences occurred in bone regeneration between oAEC-, oAFMSC-cultured, and Ctr samples and that there was a predominant action of the osteoconduction versus the stem cells osteo-induction. Indeed, it was proven that the newly formed bone amount and distribution decreased from the side of contact scaffold/native bone toward the bulk of the scaffold itself, with almost constant values of morphometric descriptors in volumes more than 1 mm from the border.

High bilirubin reduces cell survival and differentiation of primary human osteoblasts. Is this effect applicable to the serum of chronic cholestatic patients?

Bone ◽  
2010 ◽  
Vol 47 ◽  
pp. S131 ◽  
Author(s):  
S. Ruiz-Gaspà ◽  
A. Martinez-Ferrer ◽  
A. Enjuanes ◽  
P. Peris ◽  
M.J. Martinez de Osaba ◽  
...  
Keyword(s):  
Cell Survival ◽  
Human Osteoblasts ◽  
Primary Human Osteoblasts ◽  
High Bilirubin

scholarly journals Adhesion Behaviour of Primary Human Osteoblasts and Fibroblasts on Polyether Ether Ketone Compared with Titanium under In Vitro Lipopolysaccharide Incubation

Materials ◽  
2019 ◽  
Vol 12 (17) ◽  
pp. 2739 ◽  
Author(s):  
Korbinian Benz ◽  
Andreas Schöbel ◽  
Marisa Dietz ◽  
Peter Maurer ◽  
Jochen Jackowski
Keyword(s):  
Gene Expression ◽  
Protein Level ◽  
Binding Protein ◽  
Sem Images ◽  
Human Osteoblasts ◽  
Polyether Ether Ketone ◽  
Primary Human Osteoblasts ◽  
Titanium Surfaces ◽  
Ether Ketone

The aim of this in vitro pilot study was to analyse the adhesion behaviour of human osteoblasts and fibroblasts on polyether ether ketone (PEEK) when compared with titanium surfaces in an inflammatory environment under lipopolysaccharide (LPS) incubation. Scanning electron microscopy (SEM) images of primary human osteoblasts/fibroblasts on titanium/PEEK samples were created. The gene expression of the LPS-binding protein (LBP) and the LPS receptor (toll-like receptor 4; TLR4) was measured by real-time polymerase chain reaction (PCR). Immunocytochemistry was used to obtain evidence for the distribution of LBP/TLR4 at the protein level of the extra-cellular-matrix-binding protein vinculin and the actin cytoskeleton. SEM images revealed that the osteoblasts and fibroblasts on the PEEK surfaces had adhesion characteristics comparable to those of titanium. The osteoblasts contracted under LPS incubation and a significantly increased LBP gene expression were detected. This was discernible at the protein level on all the materials. Whereas no increase of TLR4 was detected with regard to mRNA concentrations, a considerable increase in the antibody reaction was detected on all the materials. As is the case with titanium, the colonisation of human osteoblasts and fibroblasts on PEEK samples is possible under pro-inflammatory environmental conditions and the cellular inflammation behaviour towards PEEK is lower than that of titanium.

Sign in / Sign up

Export Citation Format

Share Document