Mechanical stimulation improves osteogenesis and the mechanical properties of osteoblast‐laden RGD ‐functionalized polycaprolactone/hydroxyapatite scaffolds

2020 ◽  
Vol 108 (12) ◽  
pp. 2421-2434
Author(s):  
Ali A. Salifu ◽  
John D. Obayemi ◽  
Vanessa O. Uzonwanne ◽  
Winston O. Soboyejo
Author(s):  
Joseph Keyes ◽  
Michael Junkin ◽  
Pak Kin Wong ◽  
Jonathan P. Vande Geest

The relationship between the 3D microstructure of tissue-engineered constructs (TECs) and their resulting mechanical and biological function is critical in providing TECs with clinically meaningful mechanical properties in reasonable incubation times. We hypothesize that the next generation of TECs must incorporate a controllable and optimized microstructure (and resulting mechanical properties) if they are to mechanically and biologically mimic tissue function. While the development of a robustly engineered tissue replacement will undoubtedly require simultaneous biochemical and biomechanical stimulation, this paper will focus on the development of a device to impose localized micro-mechanical stimulation.


2013 ◽  
Vol 135 (7) ◽  
Author(s):  
Maziar Aghvami ◽  
V. H. Barocas ◽  
E. A. Sander

Engineered tissues are commonly stretched or compressed (i.e., conditioned) during culture to stimulate extracellular matrix (ECM) production and to improve the mechanical properties of the growing construct. The relationships between mechanical stimulation and ECM remodeling, however, are complex, interdependent, and dynamic. Thus, theoretical models are required for understanding the underlying phenomena so that the conditioning process can be optimized to produce functional engineered tissues. Here, we continue our development of multiscale mechanical models by simulating the effect of cell tractions on developing isometric tension and redistributing forces in the surrounding fibers of a collagen gel embedded with explants. The model predicted patterns of fiber reorganization that were similar to those observed experimentally. Furthermore, the inclusion of cell compaction also changed the distribution of fiber strains in the gel compared to the acellular case, particularly in the regions around the cells where the highest strains were found.


2017 ◽  
Author(s):  
◽  
Huang Huang

It is well recognized that arterial stiffness increases with aging and aging-related diseases, such as hypertension. The mechanisms for the increase in stiffness have been largely thought to be the result of changes in the composition and structure of the extracellular matrix (ECM). However, recent evidence suggests that intrinsic mechanical properties of vascular smooth muscle cells (VSMCs) may also play an important role. The changes noted in VSMCs include an increase in cell stiffness and enhanced cell adhesion to the ECM protein fibronectin (FN). The stimuli that provoke these changes are not well known, nor are the underlying causes of these changes. In addition, previous work from our laboratory revealed that there is coordination between cell stiffness and cell adhesion to FN of VSMCs treated with vasoactive agents. VSMCs adhesion to ECM is largely mediated by the transmembrane receptors, integrins, which provide a physical connection between the cytoskeleton and ECM proteins. This unique molecular axis allows integrins to act as an ideal transducer for initiating signaling from both outside-in and inside-out signaling pathways. Integrin-mediated cell adhesion is known to play an important role in VSMCs normal function and it is also involved in various pathological conditions. Despite the growing body of evidence for the importance of integrins in vascular function and dysfunction, there are gaps in our knowledge concerning how integrin adhesion is linked to changes in VSMC mechanical properties and how integrin adhesions respond to dynamic mechanical stimulation. Therefore, my overall research goal was to better understand integrin adhesion behavior in VSMCs response to cellular and mechanical stimuli. Atomic force microscopy (AFM) was used to measure VSMC mechanical properties and adhesion to ECM as well as to provide a tool for applying mechanical stimulation to the VSMC. The first part of this research focuses on clarifying the mechanism of coordination between VSMC stiffness and adhesion to FN. We hypothesized that enhanced cell adhesion to FN is mediated by changes in the level of intracellular calcium ([Ca2+]i). To test this hypothesis, confocal imaging of fluo-4, a fluorescent calcium indicator, combined with AFM force spectroscopy were used simultaneously to record levels of[Ca2+]i and force-distance curves to measure VSMC mechanical properties and adhesion. The cell mechanical properties and adhesion to FN were correlated with levels of [Ca2+]i. KCl and BAPTA-AM were used to modulate the level of [Ca2+]i. KCl-treated VSMCs showed a rapid transient increase in cell stiffness as well as cell adhesion to FN, and these two events were synchronized with the superimposed transient increase in the level of [Ca2+]i. In contrast, VSMCs incubated with an intracellular calcium chelator, BAPTAAM, exhibited decrease in stiffness and cell adhesion to FN as well as reduced levels of [Ca2+]i. These findings suggest that in VSMCs integrin activation is linked to the level of [Ca2+]i. Further studies with ML-7pretreated cells to inhibit myosin light chain kinase showed KCl induced changes were not abolished, suggesting that calcium-induced integrin activation is not dependent on mechanical events associated with contraction or signaling events downstream of contraction. In the second part of my research integrin adhesion behavior was studied in VSMC focal adhesions subjected to oscillating mechanical stimulation. VSMCs from the aorta, a large elastic conduit artery, exposed to cyclic strain stress induced by heart rate-associated changes in pulse pressure, were selected for study. We worked together with applied mathematician scientists from the University of Nottingham. Through collaborative discussions, they developed a mathematical model to predict interactions between integrins and ECM during dynamic changes in mechanical stretch. In this study, my goal was to provide biological data to test and inform the model. We used the AFM with FN-coated probes and measured VSMC adhesion to the FN by applying vertically oscillating stretch to integrin focal adhesions. Our experimental data provided evidence to support model predictions that changes in the degree of mechanical stretch applied to an integrin adhesion would behave in a bistable manner. The bistability was manifest as a breakpoint or failure point at which integrin adhesions rupture and reform. The simulation model and experimental data indicate that the bistable behavior occurs during intermediate amplitude stretches between full detachment and no detachment. The data also indicated that the failure point for adhesion was dependent on the initial conditions of the adhesion and influenced by whether the adhesion was pre-existing or newly formed. These data suggest this bistability behavior could be an indication of a unique switch point in the nature of integrin signaling. In conclusion, this research has provided new information on integrin adhesion in response to inside-out cellular stimulation and outside-in dynamic mechanical stimulation. These data indicate the involvement of a calcium-related signaling pathway in VSMC integrin activation. In addition, these data show unique integrin adhesion behavior in response to a dynamic vs static physical environment. It is clear from this work that further studies will be needed to develop a whole picture and to understand the functional and pathological implications of mechanisms coordinating integrin adhesion with cell mechanical properties and the dynamic behavior of integrins.


Author(s):  
Nathan R. Schiele ◽  
Ryan A. Koppes ◽  
David T. Corr

The clinical demand for tendon replacements following injury, surgical excision, or disease drives current tissue engineering endeavors. Great strides have been made in producing functional tissues, but none have gained clinical acceptance. Scaffold-free and cell-based engineered tissue constructs allow the use of autologous cells and avoid potential scaffold-based complications such as immune rejection and breakdown byproducts. However, scaffold-free approaches have yet to replicate the mechanical properties of tendon [1,2]. In an effort to mimic some key aspects of in vivo embryonic tendon development, such as high cellularity and subsequent cell-to-cell contact, we have utilized a cell-based and scaffold-free method to direct fibroblast cell growth through geometric constraint to form single fibers [3,4]. Early application of mechanical cues (within hours of cell attachment) is essential for cell and collagen fiber alignment, as well as tissue maturation through matrix protein synthesis, and perhaps most importantly, these structural changes will result in altered mechanical properties. We recently established a method to apply mechanical stimulation to developing scaffold-free, cell-based fibers with the goal of replicating tenogenic development cues [5]. As an important step towards scaffold-free tendon replacements, the objective of this study was to demonstrate the influence of dynamic mechanical cues on growing fibers, which can ultimately be optimized to achieve tendon-like structure and mechanical properties.


1969 ◽  
Vol 51 (2) ◽  
pp. 319-324
Author(s):  
J. A. KITCHING

1. Spirostomum ambiguum fails to make the avoiding reaction at pressures of 4000 p.s.i. and over. The critical pressure is between 2000 and 4000 p.s.i. 2. Light or moderate mechanical stimulation with a hair no longer produced reversal or body contraction at pressures over 4000 p.s.i. 3. Blows severe enough to kink the body surface, or sudden exposure to NaCl in solution, elicited prolonged reversal at 6000 and 7000 p.s.i. 4. In a direct current the cilia on the cathodal side reversed with a threshold voltage either the same or not more than twice as great as that required without application of pressure. 5. It is suggested that at pressures of 4000 p.s.i. and over the cilia at the anterior end of the organism fail to receive and translate the stimulus. This failure could be due either to the reduced activity of the cilia or perhaps to an impairment of mechanical properties of the ectoplasm.


2014 ◽  
Vol 1 (1) ◽  
Author(s):  
Marie-Louise Lemloh ◽  
Anna Pohl ◽  
Eva Weber ◽  
Marco Zeiger ◽  
Petra Bauer ◽  
...  

AbstractMechanical properties of plants and underlying structure-property relationships are important for agricultural purposes as well as for biomimetic concepts. In this study, the effect of mechanical stimulation on morphology and bending properties of the stalk was investigated for Sorghum bicolor (Poaceae), a widely used drought-tolerant biomass grass. An experimental set-up allowing for defined growth and mechanical perturbation (flexing) during a defined growth period was designed. Mechanical properties of individual internodes of the stalk were determined by three-point bending tests. We found that the three investigated lines showed differences in their general bending strength in the non-stimulated condition. However, similar high range of bending strength values was measured for all plant lines after they underwent the mechanical stimulation procedure. The anatomy of internode cross-sections was examined to evaluate structure-property relationships. An increased thickness of the outer sclerenchymatous tissue was observed for internodes with higher bending strength values. Dried internodes fail under lower strains but showed higher bending strength. These findings show that mechanosensitivity in sorghum is dependent on genetic as well as environmental factors. The experimental system presented here offers new straight-forward possibilities for S. bicolor line selection for applications requiring mechanical strength of the stalk.


Polymers ◽  
2021 ◽  
Vol 13 (9) ◽  
pp. 1501
Author(s):  
Victor Perez-Puyana ◽  
Paula Villanueva ◽  
Mercedes Jiménez-Rosado ◽  
Fernando de la Portilla ◽  
Alberto Romero

Skeletal muscle regeneration is increasingly necessary, which is reflected in the increasing number of studies that are focused on improving the scaffolds used for such regeneration, as well as the incubation protocol. The main objective of this work was to improve the characteristics of polycaprolactone (PCL) scaffolds by incorporating elastin to achieve better cell proliferation and biocompatibility. In addition, two cell incubation protocols (with and without dynamic mechanical stimulation) were evaluated to improve the activity and functionality yields of the regenerated cells. The results indicate that the incorporation of elastin generates aligned and more hydrophilic scaffolds with smaller fiber size. In addition, the mechanical properties of the resulting scaffolds make them adequate for use in both bioreactors and patients. All these characteristics increase the biocompatibility of these systems, generating a better interconnection with the tissue. However, due to the low maturation achieved in biological tests, no differences could be found between the incubation with and without dynamic mechanical stimulation.


Author(s):  
Patrick McGarry ◽  
Robert M. McMeeking ◽  
Anthony G. Evans ◽  
Vikram S. Deshpande

The mechanical properties of a cells surrounding environment, or extra cellular matrix (ECM), play a crucial role in cellular behavior. For example, it has been shown that cells tend to spread more on rigid substrates [1, 2] and that motile cells move from regions of low substrate rigidity to regions of high substrate rigidity [3].


Sign in / Sign up

Export Citation Format

Share Document