Comparison of impacts of dams on the annual maximum flow characteristics in three regulated hydrologic regimes in Québec (Canada)

2006 ◽  
Vol 20 (16) ◽  
pp. 3485-3501 ◽  
Author(s):  
Ali A. Assani ◽  
Émilie Stichelbout ◽  
André G. Roy ◽  
François Petit
Keyword(s):  
Flow Characteristics ◽  
Maximum Flow ◽  
Annual Maximum ◽  
Hydrologic Regimes

Role of Dissipation Characteristics in Predicting Flow from Dissimilar Centrifugal Pumps

1994 ◽  
Vol 208 (4) ◽  
pp. 285-294 ◽  
Author(s):  
E A Bunt ◽  
B Parsons ◽  
F Holtzhausen
Keyword(s):  
Flow Characteristics ◽  
Maximum Flow ◽  
Centrifugal Pumps ◽  
Graphical Solution ◽  
Dissipative Flow ◽  
In Series ◽  
Lower Maximum ◽  
Output Field ◽  
High Series

Examination of flows in a particular case of dissimilar pumps coupled in series or in parallel (without check valves) showed that the ‘classical’ graphical solution of combined characteristics in the [+H, +Q] quadrant did not accord with the output field in certain regions. To predict the full flow fields, it was necessary to take into account dissipative flow characteristics in two other quadrants: for low-output parallel flow (when there is still flow available from the pump of higher head when the ‘weaker’ pump's flow has been reduced to zero), that in the [+H, –Q] quadrant; and for high series flow (after the output head of the pump of lower maximum flow has been reduced to zero), that in the [–H, +Q] quadrant. This problem does not arise when the pumps have identical characteristics.

scholarly journals Determination of receiver consumption characteristics using computer simulation

2020 ◽  
Vol 8 (2) ◽  
pp. 10-14
Author(s):  
S.S. Vasyliv ◽  
◽  
V.S. Zhdanov ◽  
M.V. Yevseyenko ◽  
◽  
...  
Keyword(s):  
Computer Simulation ◽  
Flow Rate ◽  
Rocket Engine ◽  
Flow Characteristics ◽  
Maximum Flow ◽  
Complex Configuration ◽  
Rocket Engines ◽  
Gas Leakage ◽  
Control Forces ◽  
Firing Tests

The problem of implementing the detonation mode of fuel combustion in thermal propulsion systems has been widely studied last decade. There are many works on fundamental and applied research on pulsating detonation. Solid propellant detonation engines can develop significant forces for a short time at low structural masses, and therefore they are ideal for auxiliary systems for the removal of separated rocket parts. In addition, detonation processes can be used to create control forces for correcting the trajectory of aircraft. All these facts determine the relevance of the area of work. For studying detonation installations, it is necessary to create test stands, but the design of test installations is an urgent and complex optimization problem. It is advisable to solve this problem with the help of computer simulation. In the existing experimental methods, for designing, it is necessary to determine in advance the geometric parameters of receivers and pipelines that provide the necessary gas consumption for firing tests of detonation rocket engines. The work is devoted to the development of a method for determining the flow characteristics of a receiver with a pipeline of complex configuration based on the constructed model of the stand. Based on the initial data, a computer simulation of the air leakage process from the receiver was carried out, for which the Solid Works software package was used. The places of pressure drop, maximum flow rate, and air mass flow are determined. The low value of the flow rate factor is due to the complex configuration of the pipeline with numerous bends and two bellows. Comparison of calculation results with experimental data was held. The difference between the experimental and calculated values does not exceed 3.6%. The obtained information is used to select the required value of the oxidizer excess coefficient during firing tests of detonation rocket engine models. Keywords: flow rate, gas leakage, receiver, model.

The Effects of Compression and Pore Size Variations on the Liquid Flow Characteristics in Metal Foams

2001 ◽  
Vol 124 (1) ◽  
pp. 263-272 ◽  
Author(s):  
K. Boomsma ◽  
D. Poulikakos
Keyword(s):  
Flow Characteristics ◽  
Maximum Flow ◽  
Metal Foams ◽  
Heat Sinks ◽  
Convection Heat ◽  
Hydraulic Characteristics ◽  
Aluminum Foams ◽  
Transitional Regime ◽  
Open Cell ◽  
Flow Velocities

Open-cell aluminum foams were investigated using water to determine their hydraulic characteristics. Maximum fluid flow velocities achieved were 1.042 m/s. The permeability and form coefficient varied from 2.46×10−10 m2 and 8701 m−1 to 3529×10−10 m2 and 120 m−1, respectively. It was determined that the flowrate range influenced these calculated parameters, especially in the transitional regime where the permeability based Reynolds number varied between unity and 26.5. Beyond the transition regime where ReK≳30, the permeability and form coefficient monotonically approached values which were reported as being calculated at the maximum flow velocities attained. The results obtained in this study are relevant to engineering applications employing metal foams ranging from convection heat sinks to filters and flow straightening devices.

scholarly journals Flood Frequency Analysis at the Downstream of Sg. Perak River Basin using Annual Maximum Flow Discharge Data

2018 ◽  
Vol 7 (4.35) ◽  
pp. 709 ◽  
Author(s):  
Munir Snu ◽  
Sidek L.M ◽  
Haron Sh ◽  
Noh Ns.M ◽  
Basri H ◽  
...  
Keyword(s):  
Probability Distribution ◽  
River Basin ◽  
Frequency Analysis ◽  
Return Period ◽  
Maximum Flow ◽  
Flood Frequency ◽  
Flood Frequency Analysis ◽  
Annual Maximum ◽  
Discharge Data ◽  
Flow Discharge

The recent flood event occurred in 2014 had caused disaster in Perak and Sungai Perak is the main river of Perak which is a major natural drainage system within the state. The aim of this paper is to determine the expected discharge to return period downstream for Sg. Perak River Basin in Perak by using annual maximum flow data. Flood frequency analysis is a technique to assume the flow values corresponding to specific return periods or probabilities along the river at a different site. The method involves the observed annual maximum flow discharge data to calculate statistical information such as standard deviations, mean, sum, skewness and recurrence intervals. The flood frequency analysis for Sg. Perak River Basin was used Log Pearson Type-III probability distribution method. The annual maximum peak flow series data varying over period 1961 to 2016. The probability distribution function was applied to return periods (T) where T values are 2years, 5years, 10years, 25years, 50years, and 100years generally used in flood forecasting. Flood frequency curves are plotted after the choosing the best fits probability distribution for annual peak maximum data. The results for flood frequency analysis shows that Sg. Perak at Jambatan Iskandar much higher inflow discharge  which is 3714.45m3/s at the 100years return period compare to Sg. Plus at Kg Lintang and Sg. Kinta at Weir G. With this, the 100years peak flow at Sg Perak river mouth is estimated to be in the range of 4,000 m3/s. Overall, the analysis relates the expected flow discharge to return period for all tributaries of Sg. Perak River Basin.

The Fabrication and Test of a Phase-Change Micropump

2001 ◽  
Author(s):  
Hyeun Joong Yoon ◽  
Woo Young Sim ◽  
Sang Sik Yang
Keyword(s):  
Phase Change ◽  
Flow Rate ◽  
Flow Characteristics ◽  
Check Valve ◽  
Maximum Flow ◽  
Input Voltage ◽  
Working Fluid ◽  
Duty Ratio ◽  
Boron Diffusion ◽  
Change Type

Abstract This paper presents the fabrication and test of a phase-change type micropump with two aluminum flap valves. This micropump consists of a pair of Al flap valves and a phase-change type actuator. The actuator is composed of a heater, a silicone rubber diaphragm and a working fluid chamber. The diaphragm is actuated by the vaporization and the condensation of the working fluid. The micropump is fabricated by the anisotropic etching, the boron diffusion and the metal evaporation. The dimension of the micropump is 8.5 mm × 5 mm × 1.7 mm. The forward and the backward flow characteristics of the flap valve illustrate the appropriateness as a check valve. Also, the flow rate of the micropump is measured. When the square wave input voltage of 10 V is applied to the heater, the maximum flow rate of the micropump is 6.1 μl/min at 0.5 Hz and the duty ratio of 60% for zero pressure difference.

scholarly journals Development of a Design Tool for Flow Rate Optimization in the Tata Swach Water Filter

2014 ◽  
Author(s):  
Sean T. Ricks ◽  
John R. Lewandowski ◽  
Emmanuel G. Lim ◽  
Dawn M. Wendell ◽  
Amos G. Winter
Keyword(s):  
Flow Rate ◽  
Flow Behavior ◽  
Flow Characteristics ◽  
Maximum Flow ◽  
Primary Objective ◽  
Design Tool ◽  
Water Filter ◽  
Increase Flow Rate ◽  
Weak Points ◽  
Rate Optimization

When developing a first-generation product, an iterative approach often yields the shortest time-to-market. In order to optimize its performance, however, a fundamental understanding of the theory governing its operation becomes necessary. This paper details the optimization of the Tata Swach, a consumer water purifier produced for India. The primary objective of the work was to increase flow rate while considering other factors such as cost, manufacturability, and efficacy. A mathematical model of the flow characteristics through the filter was developed. Based on this model, a design tool was created to allow designers to predict flow behavior without prototyping, significantly reducing the necessity of iteration. Sensitivity analysis was used to identify simple ways to increase flow rate as well as potential weak points in the design. Finally, it was demonstrated that maximum flow rate can be increased by 50% by increasing the diameter of a flow-restricting feature while simultaneously increasing the length of the active purification zone. This can be accomplished without significantly affecting cost, manufacturability, and efficacy.

Trend detection in river flow series: 1. Annual maximum flow / Détection de tendance dans des séries de débit fluvial: 1. Débit maximum annuel

2005 ◽  
Vol 50 (5) ◽  
Author(s):  
Zbigniew W. Kundzewicz ◽  
Dariusz Graczyk ◽  
Thomas Maurer ◽  
Iwona Pińskwar ◽  
Maciej Radziejewski ◽  
...  
Keyword(s):  
River Flow ◽  
Maximum Flow ◽  
Trend Detection ◽  
Annual Maximum ◽  
Flow Detection

A prototype paediatric venous cannula with shape change in situ

Perfusion ◽  
2003 ◽  
Vol 18 (1) ◽  
pp. 61-65 ◽  
Author(s):  
David Jegger ◽  
Antonio F Corno ◽  
Antonio Mucciolo ◽  
Giuseppe Mucciolo ◽  
Yves Boone ◽  
...  
Keyword(s):  
Flow Rate ◽  
Shape Change ◽  
Venous Pressure ◽  
Flow Characteristics ◽  
Maximum Flow ◽  
Venous Drainage ◽  
Vessel Diameter ◽  
Single Stage ◽  
Set Up

During cardiopulmonary bypass (CPB), venous drainage may be impeded due to small vessel and cannula size or chattering, thus, blood return to the heart-lung machine is reduced. We designed a self-expandable prototype cannula, which is able to maintain the vein open and overcome this problem and analysed its performance capability. This prototype and several other cannulae were tested using an access vessel diameter of 7 mm. An in vitro circuit was set up with a 10 mm penrose latex tube simulating the patient’s vein placed between the patient preload reservoir and the cannula, encasing the cannula’s inlet(s). Maximum flow rate was determined for passive venous drainage (PVD) at preloads (P) of 2 and 4 mmHg. We compared these results to three classic single-stage venous cannulae: basket tip, thoracic drain and percutaneous tip. By comparing the other cannulae to the prototype, under PVD conditions and a central venous pressure (CVP) of 2 mmHg, the prototype cannula’s flow rate (1.329 /0.04 L/min) outperformed the basket type (the best performing comparator) (1.029 /0.08 L/min) by 23% (p B /0.005). When the preload was increased to 4 mmHg under PVD conditions, the same trend was noted with the prototype cannula (1.659 /0.05 L/min), outperforming the basket cannula’s value (1.269 /0.05 L/min) by 24% (p B /0.001). This new cannula design provides superior flow characteristics, under all test conditions, compared to the classic single-stage venous cannulae used for paediatric CPB surgery.

Sign in / Sign up

Export Citation Format

Share Document