scholarly journals A Generic Method to Model CO2Emission Performances of Combined-Cycle Power Plants for Environmental Unit Commitment

2017 ◽  
Vol 6 (1) ◽  
pp. 72-83 ◽  
Author(s):  
Rémy Rigo-Mariani ◽  
Keck Voon Ling ◽  
Jan M. Maciejowski
Keyword(s):  
Power Plants ◽  
Unit Commitment ◽  
Combined Cycle ◽  
Environmental Unit

scholarly journals Integration of Flow Temperatures in Unit Commitment Models of Future District Heating Systems

Energies ◽  
2019 ◽  
Vol 12 (6) ◽  
pp. 1061 ◽  
Author(s):  
Cynthia Boysen ◽  
Cord Kaldemeyer ◽  
Simon Hilpert ◽  
Ilja Tuschy
Keyword(s):  
Technology Assessment ◽  
Power Plants ◽  
Internal Combustion Engines ◽  
Unit Commitment ◽  
District Heating ◽  
Heat Pumps ◽  
Combined Cycle ◽  
Mixed Integer ◽  
District Heating System ◽  
Temperature Levels

The transformation of heat supply structures towards 4th generation district heating (4GDH) involves lower supply temperatures and a shift in technology. In order to assess the economic viability of the respective systems, adequate unit commitment models are needed. However, maintaining the formal requirements, while reducing the computational efforts of these models, often includes simplifications such as the assumption of constant supply temperatures. This study investigates the effect of introducing varying supply temperatures in mixed-integer linear programming models. Based on a case study of a municipal district heating system, how the temperature integration approach affects unit commitment and technology assessment for different temperature levels and scenarios is analyzed. In particular, three supply temperature levels are investigated with both variable and constant temperatures in two scenarios. Results indicate that lower flow temperature levels in the heating network tend to favor internal combustion engines, combined cycle power plants, and heat pumps; while back pressure steam turbines, peak loads, and electric boilers show declining operating hours. Furthermore, the effect of varying versus constant temperatures at the same temperature level is rather small, at least as long as technical restrictions do not come into play. Finally, it is found that the effect of changing temperature on a technology assessment is comparably small as opposed to adaptions in the regulatory framework.

Current and Future Technologies for Natural Gas Combined Cycle (NGCC) Power Plants

2013 ◽  
Author(s):  
Norma J. Kuehn ◽  
Kajal Mukherjee ◽  
Paul Phiambolis ◽  
Lora L. Pinkerton ◽  
Elsy Varghese ◽  
...  
Keyword(s):  
Natural Gas ◽  
Power Plants ◽  
Combined Cycle ◽  
Natural Gas Combined Cycle ◽  
Future Technologies

Optimization of fog inlet air cooling system for combined cycle power plants using genetic algorithm

2015 ◽  
Vol 76 ◽  
pp. 449-461 ◽  
Author(s):  
Mehdi A. Ehyaei ◽  
Mojtaba Tahani ◽  
Pouria Ahmadi ◽  
Mohammad Esfandiari
Keyword(s):  
Genetic Algorithm ◽  
Power Plants ◽  
Cooling System ◽  
Combined Cycle ◽  
Air Cooling ◽  
Air Cooling System

Thermoeconomic optimization of combined cycle gas turbine power plants using genetic algorithms

2003 ◽  
Vol 23 (17) ◽  
pp. 2169-2182 ◽  
Author(s):  
Manuel Valdés ◽  
Ma Dolores Durán ◽  
Antonio Rovira
Keyword(s):  
Genetic Algorithms ◽  
Gas Turbine ◽  
Power Plants ◽  
Combined Cycle

Component Low Cycle Fatigue Behavior Based on Standard Calculation Procedure and Non-Linear FEA

2017 ◽  
Author(s):  
Jürgen Rudolph ◽  
Adrian Willuweit ◽  
Steffen Bergholz ◽  
Christian Philippek ◽  
Jevgenij Kobzarev
Keyword(s):  
Power Plants ◽  
Low Cycle Fatigue ◽  
Fatigue Behavior ◽  
Hybrid Approach ◽  
Combined Cycle ◽  
Cycle Fatigue ◽  
Element Analysis ◽  
Constitutive Material Model ◽  
Standard Design ◽  
Creep Fatigue

Components of conventional power plants are subject to potential damage mechanisms such as creep, fatigue and their combination. These mechanisms have to be considered in the mechanical design process. Against this general background — as an example — the paper focusses on the low cycle fatigue behavior of a main steam shut off valve. The first design check based on standard design rules and linear Finite Element Analysis (FEA) identifies fatigue sensitive locations and potentially high fatigue usage. This will often occur in the context of flexible operational modes of combined cycle power plants which are a characteristic of the current demands of energy supply. In such a case a margin analysis constitutes a logical second step. It may comprise the identification of a more realistic description of the real operational loads and load-time histories and a refinement of the (creep-) fatigue assessment methods. This constitutes the basis of an advanced component design and assessment. In this work, nonlinear FEA is applied based on a nonlinear kinematic constitutive material model, in order to simulate the thermo-mechanical behavior of the high-Cr steel component mentioned above. The required material parameters are identified based on data of the accessible reference literature and data from an own test series. The accompanying testing campaign was successfully concluded by a series of uniaxial thermo-mechanical fatigue (TMF) tests simulating the most critical load case of the component. This detailed and hybrid approach proved to be appropriate for ensuring the required lifetime period of the component.

Natural Gas Decarbonization to Reduce CO2 Emission From Combined Cycles—Part II: Steam-Methane Reforming

2000 ◽  
Vol 124 (1) ◽  
pp. 89-95 ◽  
Author(s):  
G. Lozza ◽  
P. Chiesa
Keyword(s):  
Natural Gas ◽  
Gas Turbine ◽  
Partial Oxidation ◽  
Power Plants ◽  
Combined Cycle ◽  
Performance Estimation ◽  
Thermodynamic Efficiency ◽  
Methane Reforming ◽  
Operating Pressure ◽  
Carbon Conversion

This paper discusses novel schemes of combined cycle, where natural gas is chemically treated to remove carbon, rather than being directly used as fuel. Carbon conversion to CO2 is achieved before gas turbine combustion. The first part of the paper discussed plant configurations based on natural gas partial oxidation to produce carbon monoxide, converted to carbon dioxide by shift reaction and therefore separated from the fuel gas. The second part will address methane reforming as a starting reaction to achieve the same goal. Plant configuration and performance differs from the previous case because reforming is endothermic and requires high temperature heat and low operating pressure to obtain an elevated carbon conversion. The performance estimation shows that the reformer configuration has a lower efficiency and power output than the systems addressed in Part I. To improve the results, a reheat gas turbine can be used, with different characteristics from commercial machines. The thermodynamic efficiency of the systems of the two papers is compared by an exergetic analysis. The economic performance of natural gas fired power plants including CO2 sequestration is therefore addressed, finding a superiority of the partial oxidation system with chemical absorption. The additional cost of the kWh, due to the ability of CO2 capturing, can be estimated at about 13–14 mill$/kWh.

Repowering and Retrofitting

2002 ◽  
Author(s):  
Andreas Pickard
Keyword(s):  
Steam Turbine ◽  
Power Plants ◽  
Free Market ◽  
Leading Edge ◽  
Project Planning ◽  
Combined Cycle ◽  
Steam Turbines ◽  
Planning Stage ◽  
Reheat Steam ◽  
Plant Optimization

At the start of this new century, environmental regulations and free-market economics are becoming the key drivers for the electricity generating industry. Advances in Gas Turbine (GT) technology, allied with integration and refinement of Heat Recovery Steam Generators (HRSG) and Steam Turbine (ST) plant, have made Combined Cycle installations the most efficient of the new power station types. This potential can also be realized, to equal effect, by adding GT’s and HRSG’s to existing conventional steam power plants in a so-called ‘repowering’ process. This paper presents the economical and environmental considerations of retrofitting the steam turbine within repowering schemes. Changing the thermal cycle parameters of the plant, for example by deletion of the feed heating steambleeds or by modified live and reheat steam conditions to suit the combined cycle process, can result in off-design operation of the existing steam turbine. Retrofitting the steam turbine to match the combined cycle unit can significantly increase the overall cycle efficiency compared to repowering without the ST upgrade. The paper illustrates that repowering, including ST retrofitting, when considered as a whole at the project planning stage, has the potential for greater gain by allowing proper plant optimization. Much of the repowering in the past has been carried out without due regard to the benefits of re-matching the steam turbine. Retrospective ST upgrade of such cases can still give benefit to the plant owner, especially when it is realized that most repowering to date has retained an unmodified steam turbine (that first went into operation some decades before). The old equipment will have suffered deterioration due to aging and the steam path will be to an archaic design of poor efficiency. Retrofitting older generation plant with modern leading-edge steam-path technology has the potential for realizing those substantial advances made over the last 20 to 30 years. Some examples, given in the paper, of successfully retrofitted steam turbines applied in repowered plants will show, by specific solution, the optimization of the economics and benefit to the environment of the converted plant as a whole.

Variability in Thermal Performance and Measured Heat Rate in Fossil-Fuelled Power Plants

1992 ◽  
Vol 206 (2) ◽  
pp. 109-123 ◽  
Author(s):  
F L Carvalho ◽  
F H D Conradie ◽  
H Kuerten ◽  
F J McDyer
Keyword(s):  
Thermal Performance ◽  
Power Plants ◽  
Performance Monitoring ◽  
Unit Commitment ◽  
Thermal Power ◽  
Heat Rate ◽  
Plant Performance ◽  
Plant Management ◽  
Fuel Quality ◽  
Stable Operating

The paper examines the variability of key parameters in the operation of ten thermal power plants in various commercial grid environments with a view to assessing the viability of ‘on-demand’ plant performance monitoring for heat rate declaration. The plants of various types are limited to coal- and oil-fired units in the capacity range of 305–690 MW generated output. The paper illustrates the influence of control system configuration on effective and flexible power plant management. The analysis of variability indicates that there is a reasonable probability of achieving adequately stable operating periods within the normal operating envelope of grid dispatch instructions when thermal performance monitoring and display can be undertaken with a high confidence level. The levels of variability in fuel quality, which were measured during nominally constant levels of fuel input and generated output, range from about +1 per cent for oil-fired plants to about ±5 per cent for coal-fired power plants. The implications of adopting on-line monitoring of unit heat rate as an input to the generation ordering and unit commitment process are potentially significant cost and energy conservation benefits for utilities having a high proportion of coal- and oil-fired generation.

Inlet Air Cooling Applied to Combined Cycle Power Plants: Influence of Site Climate and Thermal Storage Systems

2008 ◽  
Vol 130 (2) ◽  
Author(s):  
Nicola Palestra ◽  
Giovanna Barigozzi ◽  
Antonio Perdichizzi
Keyword(s):  
Power Output ◽  
Parametric Analysis ◽  
Power Plants ◽  
Cooling System ◽  
Thermal Storage ◽  
Combined Cycle ◽  
Operating Conditions ◽  
Air Cooling ◽  
Ambient Conditions ◽  
Cooling Systems

The paper presents the results of an investigation on inlet air cooling systems based on cool thermal storage, applied to combined cycle power plants. Such systems provide a significant increase of electric energy production in the peak hours; the charge of the cool thermal storage is performed instead during the night time. The inlet air cooling system also allows the plant to reduce power output dependence on ambient conditions. A 127MW combined cycle power plant operating in the Italian scenario is the object of this investigation. Two different technologies for cool thermal storage have been considered: ice harvester and stratified chilled water. To evaluate the performance of the combined cycle under different operating conditions, inlet cooling systems have been simulated with an in-house developed computational code. An economical analysis has been then performed. Different plant location sites have been considered, with the purpose to weigh up the influence of climatic conditions. Finally, a parametric analysis has been carried out in order to investigate how a variation of the thermal storage size affects the combined cycle performances and the investment profitability. It was found that both cool thermal storage technologies considered perform similarly in terms of gross extra production of energy. Despite this, the ice harvester shows higher parasitic load due to chillers consumptions. Warmer climates of the plant site resulted in a greater increase in the amount of operational hours than power output augmentation; investment profitability is different as well. Results of parametric analysis showed how important the size of inlet cooling storage may be for economical results.

Sign in / Sign up

Export Citation Format

Share Document