Linear distribution of capacitance in Dickson charge pumps to reduce rise time

2020 ◽  
Vol 48 (4) ◽  
pp. 555-566 ◽  
Author(s):  
Andrea Ballo ◽  
Alfio Dario Grasso ◽  
Gaetano Palumbo ◽  
Toru Tanzawa
Keyword(s):  
Rise Time ◽  
Linear Distribution ◽  
Charge Pumps

scholarly journals A 5 V to 180 V Charge Pump for Capacitive Loads in a 180 nm SOI Process

2021 ◽  
Author(s):  
Jakob K. Toft ◽  
Ivan H. H. Jorgensen
Keyword(s):  
High Voltage ◽  
Rise Time ◽  
Output Voltage ◽  
Supply Voltage ◽  
State Of The Art ◽  
Charge Pump ◽  
Micro Electro Mechanical System ◽  
Charge Pumps ◽  
Capacitive Load ◽  
Very High

This paper presents two variants of a high step-up ratio charge pump for high voltage micro electro-mechanical system and condenser microphones. The implementations are based on an additive charge pump topology where respectively 46 and 57 cascaded stages are used to generate an output voltage of 182 V from a supply voltage of 5 V. The two charge pumps have been fabricated in a 180 nm SOI process with a breakdown voltage of more than 200 V and respectively occupy an area of 0.52 mm2 and 0.39 mm2. The charge pumps can output up to 182.5 V and 181.7 V and are designed to drive a capacitive load with a leakage of 2 nA. When driven with a 100 kHz clock, their power consumption is respectively 40 µW and 20 µW. The rise time of the charge pumps output from 0 V to 182 V is less than 5 ms. The implemented charge pumps exhibit state-of-the-art performance for very high voltage dc-dc capacitive drive applications.

Desain dan Komparasi Kontrol Kecepatan Motor DC

2020 ◽  
Vol 7 (2) ◽  
pp. 127-134
Author(s):  
Safah Tasya Aprilyani ◽  
Irianto Irianto ◽  
Epyk Sunarno
Keyword(s):  
Steady State ◽  
Rise Time ◽  
Settling Time ◽  
Proportional Integral

Penggunaan kontrol sangat diperlukan dalam pengaturan kecepatan motor DC. Dalam pengaturan kecepatan motor DC, salah satu jenis kontrol yang digunakan adalah kontrol Proportional Integral (PI). Untuk 4 jenis metode pada kontrol PI yang digunakan adalah metode Ziegler Nichole, Chien Servo 1, Chien Regulator 1 dan perhitungan secara analitik yang telah diperoleh dari data yang sudah ada.  Namun kontrol dengan PI 4 metode yang digunakan  sebagai pembanding memiliki waktu respon kecepatan saat stabil cenderung lambat baik dari nilai settling time, rise time dan steady state. Maka dari itu dilakukan komparasi antara 4 metode kontrol PI dengan penggunaan kontrol fuzzy. Dalam membandingkan antara 4 metode kontrol PI dan kontrol fuzzy terdapat beberapa parameter sebagai perbandingan yaitu maximum overshoot, steady state, rise time dan settling time. Hasil dari perbandingan tersebut adalah kontrol fuzzy dapat menghasilkan performa lebih baik jika dibandingkan dengan 4 metode pada kontrol PI. Kontrol fuzzy memiliki nilai rise time sebesar 0,015 detik, nilai settling time sebesar 0,025 detik dengan kecepatan sebesar 2900 rpm serta error steady state sebesar 3,33% tanpa adanya overshoot dan osilasi.

STABILISASI TEGANGAN KELUARAN BUCK CONVERTER DENGAN METODE FUZZY LOGIC CONTROLLER

JURNAL ELTEK ◽  
2018 ◽  
Vol 16 (2) ◽  
pp. 125
Author(s):  
Oktriza Melfazen
Keyword(s):  
Fuzzy Logic ◽  
Steady State ◽  
Rise Time ◽  
Fuzzy Logic Controller ◽  
Buck Converter ◽  
Settling Time

Buck converter idealnya mempunyai keluaran yang stabil, pemanfaatandaya rendah, mudah untuk diatur, antarmuka yang mudah dengan pirantiyang lain, ketahanan yang lebih tinggi terhadap perubahan kondisi alam.Beberapa teknik dikembangkan untuk memenuhi parameter buckconverter. Solusi paling logis untuk digunakan pada sistem ini adalahmetode kontrol digital.Penelitian ini menelaah uji performansi terhadap stabilitas tegangankeluaran buck converter yang dikontrol dengan Logika Fuzzy metodeMamdani. Rangkaian sistem terdiri dari sumber tegangan DC variable,sensor tegangan dan Buck Converter dengan beban resistif sebagaimasukan, mikrokontroler ATMega 8535 sebagai subsistem kontroldengan metode logika fuzzy dan LCD sebagai penampil keluaran.Dengan fungsi keanggotaan error, delta error dan keanggotaan keluaranmasing-masing sebanyak 5 bagian serta metode defuzzifikasi center ofgrafity (COG), didapat hasil rerata error 0,29% pada variable masukan18V–20V dan setpoint keluaran 15V, rise time (tr) = 0,14s ; settling time(ts) = 3,4s ; maximum over shoot (%OS) = 2,6 dan error steady state(ess) = 0,3.

Pulse Rise Time Dependence of Switching Field of Co/Pt Multilayer Dot

2012 ◽  
Vol 132 (10) ◽  
pp. 838-843 ◽  
Author(s):  
Nobuaki Kikuchi ◽  
Yoshihiro Suyama ◽  
Satoshi Okamoto ◽  
Osamu Kitakami
Keyword(s):  
Time Dependence ◽  
Rise Time ◽  
Switching Field ◽  
Pulse Rise Time

Decomposition of tasks in a group of robots using cloud computing technologies

2017 ◽  
Vol 12 (1) ◽  
pp. 83-88
Author(s):  
O.V. Darintsev ◽  
A.B. Migranov
Keyword(s):  
Cloud Computing ◽  
Experimental Verification ◽  
Decomposition Algorithms ◽  
Complex Task ◽  
Large Problem ◽  
Working Capacity ◽  
Linear Distribution ◽  
Effective Teams ◽  
Computing Technologies

In this paper, various variants of decomposition of tasks in a group of robots using cloud computing technologies are considered. The specifics of the field of application (teams of robots) and solved problems are taken into account. In the process of decomposition, the solution of one large problem is divided into a solution of a series of smaller, simpler problems. Three ways of decomposition based on linear distribution, swarm interaction and synthesis of solutions are proposed. The results of experimental verification of the developed decomposition algorithms are presented, the working capacity of methods for planning trajectories in the cloud is shown. The resulting solution is a component of the complex task of building effective teams of robots.

Extremely Gusty Winds from a Viewpoint of Aerodynamic Force

2020 ◽  
Author(s):  
Junji Maeda ◽  
Takashi Takeuchi ◽  
Eriko Tomokiyo ◽  
Yukio Tamura
Keyword(s):  
Wind Speed ◽  
Wind Tunnel ◽  
Rise Time ◽  
Aerodynamic Force ◽  
Step Function ◽  
Object Size ◽  
Aerodynamic Forces ◽  
Wind Force ◽  
Wind Observation

To quantitatively investigate a gusty wind from the viewpoint of aerodynamic forces, a wind tunnel that can control the rise time of a step-function-like gust was devised and utilized. When the non-dimensional rise time, which is calculated using the rise time of the gusty wind, the wind speed, and the size of an object, is less than a certain value, the wind force is greater than under the corresponding steady wind. Therefore, this wind force is called the “overshoot wind force” for objects the size of orbital vehicles in an actual wind observation. The finding of the overshoot wind force requires a condition of the wind speed recording specification and depends on the object size and the gusty wind speed.

High-speed electro-optic switch using buried electrode structure in polymer Mach–Zehnder waveguide

2016 ◽  
Vol 30 (06) ◽  
pp. 1650063 ◽  
Author(s):  
Jingwen Sun ◽  
Jian Sun ◽  
Yunji Yi ◽  
Lucheng Qv ◽  
Shiqi Sun ◽  
...  
Keyword(s):  
Insertion Loss ◽  
Rise Time ◽  
High Speed ◽  
Low Cost ◽  
Characteristic Parameters ◽  
Electrode Structure ◽  
Processing Cost ◽  
Electro Optic ◽  
Disperse Red 1 ◽  
Excellent Photostability

A low-cost and high-speed electro-optic (EO) switch using the guest–host EO material Disperse Red 1/Polymethyl Methacrylate (DR1/PMMA) was designed and fabricated. The DR1/PMMA material presented a low processing cost, an excellent photostability and a large EO coefficient of 13.1 pm/V. To improve the performance of the switch, the in-plane buried electrode structure was introduced in the polymer Mach–Zehnder waveguide to improve the poling and modulating efficiency. The characteristic parameters of the waveguide and the electrodes were carefully designed and the fabrication process was strictly controlled. Under 1550 nm, the insertion loss of the device was 12.7 dB. The measured switching rise time and fall time of the switch were 50.00 ns and 54.29 ns, respectively.

Sign in / Sign up

Export Citation Format

Share Document