Random network modelling approach to investigate the single-phase and quasi-static immiscible two-phase flow properties in the Mesaverde formation

2016 ◽  
Vol 94 (11) ◽  
pp. 2091-2106 ◽  
Author(s):  
Farzad Bashtani ◽  
Sergey Kryuchkov ◽  
Jonathan Bryan ◽  
Brij Maini ◽  
Apostolos Kantzas
Keyword(s):  
Single Phase ◽  
Two Phase Flow ◽  
Random Network ◽  
Phase Flow ◽  
Flow Properties ◽  
Network Modelling ◽  
Two Phase ◽  
Modelling Approach

Experimental Study on Heat Transfer of Single-Phase Flow and Boiling Two-Phase Flow in Vertical Narrow Annuli

2002 ◽  
Author(s):  
Suizheng Qiu ◽  
Minoru Takahashi ◽  
Guanghui Su ◽  
Dounan Jia
Keyword(s):  
Heat Transfer ◽  
Single Phase ◽  
Two Phase Flow ◽  
Annular Channel ◽  
Phase Flow ◽  
Single Phase Flow ◽  
Transfer Coefficients ◽  
Two Phase ◽  
Narrow Annuli ◽  
Narrow Gaps

Water single-phase and nucleate boiling heat transfer were experimentally investigated in vertical annuli with narrow gaps. The experimental data about water single-phase flow and boiling two-phase flow heat transfer in narrow annular channel were accumulated by two test sections with the narrow gaps of 1.0mm and 1.5mm. Empirical correlations to predict the heat transfer of the single-phase flow and boiling two-phase flow in the narrow annular channel were obtained, which were arranged in the forms of the Dittus-Boelter for heat transfer coefficients in a single-phase flow and the Jens-Lottes formula for a boiling two-phase flow in normal tubes, respectively. The mechanism of the difference between the normal channel and narrow annular channel were also explored. From experimental results, it was found that the turbulent heat transfer coefficients in narrow gaps are nearly the same to the normal channel in the experimental range, and the transition Reynolds number from a laminar flow to a turbulent flow in narrow annuli was much lower than that in normal channel, whereas the boiling heat transfer in narrow annular gap was greatly enhanced compared with the normal channel.

Modeling of Sodium Two-Phase Flow With the TRACE Code

2009 ◽  
Author(s):  
Aurelia Chenu ◽  
Konstantin Mikityuk ◽  
Rakesh Chawla
Keyword(s):  
Single Phase ◽  
Two Phase Flow ◽  
Flow Simulation ◽  
Phase Flow ◽  
Fluid Models ◽  
Code System ◽  
Two Phase ◽  
Liquid Flows ◽  
Transfer Mechanisms ◽  
Two Fluid

In the framework of PSI’s FAST code system, the TRACE thermal-hydraulics code is being extended for representation of sodium two-phase flow. As the currently available version (v.5) is limited to the simulation of only single-phase sodium flow, its applicability range is not enough to study the behavior of a Sodium-cooled Fast Reactor (SFR) during a transient in which boiling is anticipated. The work reported here concerns the extension of the two-fluid models, which are available in TRACE for steam-water, to sodium two-phase flow simulation. The conventional correlations for ordinary gas-liquid flows are used as basis, with optional correlations specific to liquid metal when necessary. A number of new models for representation of the constitutive equations specific to sodium, with a particular emphasis on the interfacial transfer mechanisms, have been implemented and compared with the original closure models. As a first application, the extended TRACE code has been used to model experiments that simulate a loss-of-flow (LOF) accident in a SFR. The comparison of the computed results, with both the experimental data and SIMMER-III code predictions, has enabled validation of the capability of the modified TRACE code to predict sodium boiling onset, flow regimes, dryout, flow reversal, etc. The performed study is a first-of-a-kind application of the TRACE code to two-phase sodium flow. Other integral experiments are planned to be simulated to further develop and validate the two-phase sodium flow methodology.

Axial Mixing in a Novel Perforated Plate Bubble Column

2010 ◽  
Vol 8 (1) ◽  
Author(s):  
S. Dhanasekaran ◽  
T. Karunanithi
Keyword(s):  
Flow Condition ◽  
Single Phase ◽  
Two Phase Flow ◽  
Liquid Velocity ◽  
Bubble Column ◽  
Axial Dispersion ◽  
Phase Flow ◽  
Two Phase ◽  
Dispersion Number ◽  
Superficial Liquid Velocity

This investigation reports the experimental and theoretical results carried out to evaluate the axial dispersion number for an air-water system in a novel hybrid rotating and reciprocating perforated plate bubble column for single phase and two phase flow conditions. Axial dispersion studies are carried out using stimulus response technique. Sodium hydroxide solution is used as the tracer. Effects of superficial liquid velocity, agitation level and superficial gas velocity on axial dispersion number were analyzed and found to be significant. For the single phase (water) flow condition, it is found that the main variables affecting the axial dispersion number are the agitation level and superficial liquid velocity. When compared to the agitation level, the effect of superficial liquid velocity on axial dispersion number is more predominant. The increase in superficial liquid velocity decreases the axial dispersion number. The same trend is shown by agitation level but the effect is less. The rotational movement of the perforated plates enhances the radial mixing in the section; hence, axial dispersion number is reduced. For the two phase flow condition, the increase in superficial liquid velocity decreases the axial dispersion number, as reported in the single phase flow condition. The increase in agitation level decreases the axial dispersion number, but this decreasing trend is non-linear. An increase in superficial gas velocity increases the axial dispersion number. Correlations have been developed for axial dispersion number for single phase and two phase flow conditions. The correlation values are found to concur with the experimental values.

Two-Phase Flow in Liquid Filled Vessels During the Depressurization by Periodic Venting

2003 ◽  
Author(s):  
Dieter Mewes ◽  
Dirk Schmitz
Keyword(s):  
Single Phase ◽  
Two Phase Flow ◽  
Bubbly Flow ◽  
Exothermic Reaction ◽  
Liquid Mixtures ◽  
Phase Flow ◽  
Two Phase ◽  
Pressure Losses ◽  
Short Period ◽  
Liquid Flows

Pressurized chemical reactors or storage vessels are often partly filled with liquid mixtures of reacting components. In case of an unexpected and uncontrolled exothermic reaction the temperature might increase. By this the pressure follows and would exceed a critical maximum value if there would be no mechanism to decrease the pressure and the temperature in a very short period of time. A sudden venting by the opening of a safety valve or a rupture disc causes a rapid vaporization of the reacting liquid mixture. A two-phase flow will pass the ventline. Since two-phase gas-liquid flows cause high pressure losses and give rise to limited mass flows leaving the reactor, single-phase gas flows are preferred. This is emphasized by a periodic venting mechanism of the pressurized vessel. Each time the two-phase flow from the bubbling-up liquid inside the vessel reaches a certain cross-section close the entrance of the ventline. The outlet-valve is closed. Inside the vessel the increasing pressure stops the two-phase flow and only single phase flow is leaving the vessel. The two-phase bubbly flow inside the vessel is detected by a tomographic measurement device during the venting process. Experimental results for local and time dependant phase void fractions as well as pressures are compared with those obtained by numerical calculations of the instationary bubble swarm behavior inside the vessel.

Sign in / Sign up

Export Citation Format

Share Document