Numerical analysis of ring flange connection with defined surface area

Bolted flange joints are widely used in petroleum, chemical, nuclear and power industries, etc. With more and more devices are used at high temperature, the performance of flange connections becomes more complex, especially with creep of different components in flange connection. At elevated temperature, with the loss of bolt force and gasket force due to creep, the joints are prone to leak. Based on this, this paper analyzed the relaxation of bolt force at elevated temperature due to creep of bolt, flange and gasket separately and simultaneously. Besides, the influence of different initial installation stress of bolts was also studied. The results showed bolted flange joints relaxed due to gasket creep during early short term service. However, contribution of bolt and flange creep became more and more significant with the extension of time. With considering the creep of bolt, flange and gasket simultaneously, 50% to 60% of the bolt material yield strength at room temperature was recommended as the bolt initial installation stress for the joint case studied in this paper.

Download Full-text

Preparation and characterisation of vanadium pentoxide supported rhodium catalyst

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s042482010010679x ◽

1988 ◽

Vol 46 ◽

pp. 946-947

Author(s):

A. Legrouri

Keyword(s):

Aqueous Solution ◽

Thermal Decomposition ◽

Physicochemical Properties ◽

Surface Area ◽

Vanadium Pentoxide ◽

High Purity ◽

Gas Adsorption ◽

Rhodium Catalyst ◽

Optical Methods ◽

Reducible Oxides

The industrial importance of metal catalysts supported on reducible oxides has stimulated considerable interest during the last few years. This presentation reports on the study of the physicochemical properties of metallic rhodium supported on vanadium pentoxide (Rh/V2O5). Electron optical methods, in conjunction with other techniques, were used to characterise the catalyst before its use in the hydrogenolysis of butane; a reaction for which Rh metal is known to be among the most active catalysts.V2O5 powder was prepared by thermal decomposition of high purity ammonium metavanadate in air at 400 °C for 2 hours. Previous studies of the microstructure of this compound, by HREM, SEM and gas adsorption, showed it to be non— porous with a very low surface area of 6m2/g3. The metal loading of the catalyst used was lwt%Rh on V2Q5. It was prepared by wet impregnating the support with an aqueous solution of RhCI3.3H2O.

Download Full-text

Cell morphology, volume, and surface area determinations from multilevel contouring within HVEM micrographs of serial sections and whole-cell mounts

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100127426 ◽

1987 ◽

Vol 45 ◽

pp. 588-589

Author(s):

M. Marko ◽

A. Leith ◽

D. Parsons

Keyword(s):

Surface Area ◽

Electron Micrographs ◽

Cell Morphology ◽

Individual Variation ◽

Serial Section ◽

Stereo Pair ◽

Complex Structures ◽

Serial Sections ◽

Surface Areas ◽

Computer Based

The use of serial sections and computer-based 3-D reconstruction techniques affords an opportunity not only to visualize the shape and distribution of the structures being studied, but also to determine their volumes and surface areas. Up until now, this has been done using serial ultrathin sections.The serial-section approach differs from the stereo logical methods of Weibel in that it is based on the Information from a set of single, complete cells (or organelles) rather than on a random 2-dimensional sampling of a population of cells. Because of this, it can more easily provide absolute values of volume and surface area, especially for highly-complex structures. It also allows study of individual variation among the cells, and study of structures which occur only infrequently.We have developed a system for 3-D reconstruction of objects from stereo-pair electron micrographs of thick specimens.

Download Full-text