Latest advances in degumming feedstock oils for large-scale biodiesel production

2018 ◽  
Vol 13 (1) ◽  
pp. 174-191 ◽  
Author(s):  
Yogesh C. Sharma ◽  
Meena Yadav ◽  
Siddh N. Upadhyay
Keyword(s):  
Large Scale ◽  
Biodiesel Production

High vacuum distillation for low-sulfur biodiesel production: From laboratory to large scale

2019 ◽  
Vol 223 ◽  
pp. 379-385 ◽  
Author(s):  
Qinglong Xie ◽  
Li Cai ◽  
Fan Xia ◽  
Xiaojiang Liang ◽  
Zhenyu Wu ◽  
...  
Keyword(s):  
Vacuum Distillation ◽  
Large Scale ◽  
High Vacuum ◽  
Biodiesel Production ◽  
High Vacuum Distillation ◽  
Low Sulfur

scholarly journals Lipid accumulation of Chlorella sp. TLD6B from the Taklimakan Desert under salt stress

PeerJ ◽  
2021 ◽  
Vol 9 ◽  
pp. e11525
Author(s):  
Hong Li ◽  
Jun Tan ◽  
Yun Mu ◽  
Jianfeng Gao
Keyword(s):  
Salt Stress ◽  
Fatty Acid ◽  
Lipid Accumulation ◽  
Large Scale ◽  
Fatty Acid Biosynthesis ◽  
High Salinity ◽  
Raw Material ◽  
Biodiesel Production ◽  
Taklimakan Desert ◽  
Acid Biosynthesis

Chlorella has become an important raw material for biodiesel production in recent years, and Chlorella sp. TLD6B, a species with high lipid concentrations and high salt and drought tolerance, has been cultivated on a large scale. To explore the lipid accumulation of Chlorella sp. TLD6B and its relationship to external NaCl concentrations, we performed physiological measurements and genome-wide gene expression profiling under different levels of salt stress. Chlorella sp. TLD6B was able to tolerate high levels of salt stress (0.8 M NaCl addition). Lipid concentrations initially increased and then decreased as salt stress increased and were highest under the addition of 0.2 M NaCl. Comparative transcriptomic analysis revealed that salt stress enhanced the expression of genes related to sugar metabolism and fatty acid biosynthesis (the ACCases BC and BCCP, KAS II, and GPDHs involved in TAG synthesis), thereby promoting lipid accumulation under the addition of 0.2 M NaCl. However, high salinity inhibited cell growth. Expression of three SADs, whose encoded products function in unsaturated fatty acid biosynthesis, was up-regulated under high salinity (0.8 M NaCl addition). This research clarifies the relationship between salt tolerance and lipid accumulation and promotes the utilization of Chlorella sp. TLD6B.

scholarly journals Trends in Widely Used Catalysts for Fatty Acid Methyl Esters (FAME) Production: A Review

Catalysts ◽  
2021 ◽  
Vol 11 (9) ◽  
pp. 1085
Author(s):  
Shafaq Nisar ◽  
Muhammad Asif Hanif ◽  
Umer Rashid ◽  
Asma Hanif ◽  
Muhammad Nadeem Akhtar ◽  
...  
Keyword(s):  
Fatty Acid ◽  
Large Scale ◽  
Heterogeneous Catalysts ◽  
Fatty Acid Methyl Esters ◽  
Low Cost ◽  
Methyl Esters ◽  
Acid Catalyst ◽  
Product Formation ◽  
Biodiesel Production ◽  
Acid Methyl

The effective transesterification process to produce fatty acid methyl esters (FAME) requires the use of low-cost, less corrosive, environmentally friendly and effective catalysts. Currently, worldwide biodiesel production revolves around the use of alkaline and acidic catalysts employed in heterogeneous and homogeneous phases. Homogeneous catalysts (soluble catalysts) for FAME production have been widespread for a while, but solid catalysts (heterogeneous catalysts) are a newer development for FAME production. The rate of reaction is much increased when homogeneous basic catalysts are used, but the main drawback is the cost of the process which arises due to the separation of catalysts from the reaction media after product formation. A promising field for catalytic biodiesel production is the use of heteropoly acids (HPAs) and polyoxometalate compounds. The flexibility of their structures and super acidic properties can be enhanced by incorporation of polyoxometalate anions into the complex proton acids. This pseudo liquid phase makes it possible for nearly all mobile protons to take part in the catalysis process. Carbonaceous materials which are obtained after sulfonation show promising catalytic activity towards the transesterification process. Another promising heterogeneous acid catalyst used for FAME production is vanadium phosphate. Furthermore, biocatalysts are receiving attention for large-scale FAME production in which lipase is the most common one used successfully This review critically describes the most important homogeneous and heterogeneous catalysts used in the current FAME production, with future directions for their use.

WASTE FRYING OIL TRANSESTERIFICATION TREATED BY STEAM DRAG METHOD

2018 ◽  
Vol 26 (26) ◽  
pp. 34-42
Author(s):  
Daniel Sena MARINS ◽  
Marcos Vinícius Oliveira CARDOSO ◽  
Mara Eliza SANTOS ◽  
Jeferson MASSINHAN
Keyword(s):  
Moisture Content ◽  
Conversion Rate ◽  
Large Scale ◽  
Methyl Esters ◽  
Frying Oil ◽  
Raw Material ◽  
Biodiesel Production ◽  
Scale Production ◽  
Residual Oil ◽  
Conversion Rates

Demand for diversified biodiesel feedstocks is high and increasing, but few are viable for large-scale production, and many of those selected compete with other sectors of the chemical industry. To improve energy and environmental sustainability, fatty acids from waste oils that are improperly disposed of and pollute the environment can be used for transesterification reactions. However, they need treatment to achieve high conversion rates. In this context, the aim of this work was to perform and analyze the treatment of residual frying oil with the evaporation and entrainment process, aiming at its use as raw material to obtain biodiesel (methyl esters) by a transesterification reaction. The physicochemical properties of the residual oil after treatment were characterized by moisture content, pH and the acidity, saponification, iodine, and peroxide index. The conversion rate of the residual oil to methyl esters was determined by 1H NMR analysis. After the treatment, the method of analysis of variance showed that the oil obtained a significant reduction of the saponification, iodine, peroxide and acidity indexes, being the acidity reduced from 9.36 to 7.85 mg KOH g-1. The moisture content of 0.733% and elevation of pH to 8.0. The conversion rate of fatty acid biodiesel of residual oil was 79.3 %, lower value of standards norms (ASTM, 2005; EN, 2008; ANP, 2014), showing that the assigned methodology for frying residual oil is inefficient in biodiesel production.

scholarly journals Recent Advances in Glycerol Catalytic Valorization: A Review

Catalysts ◽  
2020 ◽  
Vol 10 (11) ◽  
pp. 1279
Author(s):  
Manuel Checa ◽  
Sergio Nogales-Delgado ◽  
Vicente Montes ◽  
José María Encinar
Keyword(s):  
Activated Carbon ◽  
Carboxylic Acids ◽  
Large Scale ◽  
Biodiesel Production ◽  
Added Value ◽  
Scale Production ◽  
Recent Advances ◽  
Large Scale Production ◽  
Wide Range ◽  
Technological Limitations

Once a biorefinery is ready to operate, the main processed materials need to be completely evaluated in terms of many different factors, including disposal regulations, technological limitations of installation, the market, and other societal considerations. In biorefinery, glycerol is the main by-product, representing around 10% of biodiesel production. In the last few decades, the large-scale production of biodiesel and glycerol has promoted research on a wide range of strategies in an attempt to valorize this by-product, with its transformation into added value chemicals being the strategy that exhibits the most promising route. Among them, C3 compounds obtained from routes such as hydrogenation, oxidation, esterification, etc. represent an alternative to petroleum-based routes for chemicals such as acrolein, propanediols, or carboxylic acids of interest for the polymer industry. Another widely studied and developed strategy includes processes such as reforming or pyrolysis for energy, clean fuels, and materials such as activated carbon. This review covers recent advances in catalysts used in the most promising strategies considering both chemicals and energy or fuel obtention. Due to the large variety in biorefinery industries, several potential emergent valorization routes are briefly summarized.

Microbial Oil Production from Lignocellulosic Biomass – Recent Development and Prospect

2014 ◽  
Vol 541-542 ◽  
pp. 397-403
Author(s):  
Zhang Nan Lin ◽  
Hong Juan Liu ◽  
Zhi Qin Wang ◽  
Jia Nan Zhang
Keyword(s):  
Lignocellulosic Biomass ◽  
Large Scale ◽  
Raw Materials ◽  
Oil Production ◽  
Renewable Resource ◽  
Raw Material ◽  
Biodiesel Production ◽  
Microbial Oil ◽  
Key Issues ◽  
Application Potential

Microbial oil is one of the ideal raw materials for biodiesel production because of its rapid reproduction and less influence by the climate and season variation. However, the high cost is one of the key issues that restricted its production in a large-scale. Lignocellulosic biomass, the cheap and renewable resource, might be the best raw material for microbial oil production by oleaginous microorganisms. Recent development on the microbial oil production from lignocellulosic biomass was summarized in this paper. Furthermore, the challenges and application potential of microbial oil were prospected.

A study on large scale cultivation of Microcystis aeruginosa under open raceway pond at semi-continuous mode for biodiesel production

2014 ◽  
Vol 172 ◽  
pp. 186-193 ◽  
Author(s):  
Veeramuthu Ashokkumar ◽  
Elango Agila ◽  
Zainal Salam ◽  
Mohanadoss Ponraj ◽  
Mohd Fadhil Md Din ◽  
...  
Keyword(s):  
Microcystis Aeruginosa ◽  
Large Scale ◽  
Biodiesel Production ◽  
Continuous Mode ◽  
Open Raceway Pond ◽  
Raceway Pond ◽  
Large Scale Cultivation

scholarly journals Integrated bioprocess for conversion of gaseous substrates to liquids

2016 ◽  
Vol 113 (14) ◽  
pp. 3773-3778 ◽  
Author(s):  
Peng Hu ◽  
Sagar Chakraborty ◽  
Amit Kumar ◽  
Benjamin Woolston ◽  
Hongjuan Liu ◽  
...  
Keyword(s):  
Acetic Acid ◽  
Synthesis Gas ◽  
Large Scale ◽  
Low Cost ◽  
Cost Effective ◽  
Integrated System ◽  
Biodiesel Production ◽  
Liquid Fuels ◽  
Acid Product ◽  
The Individual

In the quest for inexpensive feedstocks for the cost-effective production of liquid fuels, we have examined gaseous substrates that could be made available at low cost and sufficiently large scale for industrial fuel production. Here we introduce a new bioconversion scheme that effectively converts syngas, generated from gasification of coal, natural gas, or biomass, into lipids that can be used for biodiesel production. We present an integrated conversion method comprising a two-stage system. In the first stage, an anaerobic bioreactor converts mixtures of gases of CO2 and CO or H2 to acetic acid, using the anaerobic acetogen Moorella thermoacetica. The acetic acid product is fed as a substrate to a second bioreactor, where it is converted aerobically into lipids by an engineered oleaginous yeast, Yarrowia lipolytica. We first describe the process carried out in each reactor and then present an integrated system that produces microbial oil, using synthesis gas as input. The integrated continuous bench-scale reactor system produced 18 g/L of C16-C18 triacylglycerides directly from synthesis gas, with an overall productivity of 0.19 g⋅L−1⋅h−1 and a lipid content of 36%. Although suboptimal relative to the performance of the individual reactor components, the presented integrated system demonstrates the feasibility of substantial net fixation of carbon dioxide and conversion of gaseous feedstocks to lipids for biodiesel production. The system can be further optimized to approach the performance of its individual units so that it can be used for the economical conversion of waste gases from steel mills to valuable liquid fuels for transportation.

Sign in / Sign up

Export Citation Format

Share Document