Research on the electrospun foaming process to fabricate three-dimensional tissue engineering scaffolds

2018 ◽  
Vol 135 (46) ◽  
pp. 46898 ◽  
Author(s):  
Peng Zhao ◽  
Mingyi Cao ◽  
Haibing Gu ◽  
Qing Gao ◽  
Neng Xia ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
Three Dimensional ◽  
Tissue Engineering Scaffolds ◽  
Foaming Process

HYDROXYAPATITE, ALGINATE, AND CHITOSAN FOR BONE SCAFFOLDS: SPECTROSCOPY STUDY

2016 ◽  
Vol 19 (2) ◽  
pp. 93-100
Author(s):  
Lalita El Milla
Keyword(s):  
Tissue Engineering ◽  
Bone Tissue Engineering ◽  
Bone Tissue ◽  
Functional Groups ◽  
Bone Growth ◽  
Three Dimensional ◽  
Dimensional Structure ◽  
Tissue Engineering Scaffolds ◽  
Hydroxyapatite Powder ◽  
Materials Used

Scaffolds is three dimensional structure that serves as a framework for bone growth. Natural materials are often used in synthesis of bone tissue engineering scaffolds with respect to compliance with the content of the human body. Among the materials used to make scafffold was hydroxyapatite, alginate and chitosan. Hydroxyapatite powder obtained by mixing phosphoric acid and calcium hydroxide, alginate powders extracted from brown algae and chitosan powder acetylated from crab. The purpose of this study was to examine the functional groups of hydroxyapatite, alginate and chitosan. The method used in this study was laboratory experimental using Fourier Transform Infrared (FTIR) spectroscopy for hydroxyapatite, alginate and chitosan powders. The results indicated the presence of functional groups PO43-, O-H and CO32- in hydroxyapatite. In alginate there were O-H, C=O, COOH and C-O-C functional groups, whereas in chitosan there were O-H, N-H, C=O, C-N, and C-O-C. It was concluded that the third material containing functional groups as found in humans that correspond to the scaffolds material in bone tissue engineering.

scholarly journals Three-Dimensional Microfluidic Tissue-Engineering Scaffolds Using a Flexible Biodegradable Polymer

2006 ◽  
Vol 18 (2) ◽  
pp. 165-169 ◽  
Author(s):  
C. J. Bettinger ◽  
E. J. Weinberg ◽  
K. M. Kulig ◽  
J. P. Vacanti ◽  
Y. Wang ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
Biodegradable Polymer ◽  
Three Dimensional ◽  
Tissue Engineering Scaffolds

Mineralized Nanofibers for Bone Tissue Engineering

2018 ◽  
pp. 461-475 ◽  
Author(s):  
Ozan Karaman
Keyword(s):  
Tissue Engineering ◽  
Bone Tissue Engineering ◽  
Bone Regeneration ◽  
Bone Tissue ◽  
Three Dimensional ◽  
Bone Grafts ◽  
Tissue Engineering Scaffolds ◽  
Promising Alternative ◽  
Biomimetic Scaffolds

The limitation of orthopedic fractures and large bone defects treatments has brought the focus on fabricating bone grafts that could enhance ostegenesis and vascularization in-vitro. Developing biomimetic materials such as mineralized nanofibers that can provide three-dimensional templates of the natural bone extracellular-matrix is one of the most promising alternative for bone regeneration. Understanding the interactions between the structure of the scaffolds and cells and therefore the control cellular pathways are critical for developing functional bone grafts. In order to enhance bone regeneration, the engineered scaffold needs to mimic the characteristics of composite bone ECM. This chapter reviews the fabrication of and fabrication techniques for fabricating biomimetic bone tissue engineering scaffolds. In addition, the chapter covers design criteria for developing the scaffolds and examples of enhanced osteogenic differentiation outcomes by fabricating biomimetic scaffolds.

The Fabrication of Tissue Engineering Scaffolds by Inkjet Printing Technology

2018 ◽  
Vol 934 ◽  
pp. 129-133 ◽  
Author(s):  
Chao Fan Lv ◽  
Li Ya Zhu ◽  
Jian Ping Shi ◽  
Zong An Li ◽  
Wen Lai Tang ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
Sodium Alginate ◽  
Inkjet Printing ◽  
Three Dimensional ◽  
3D Bioprinting ◽  
Tissue Engineering Scaffolds ◽  
Printing Technology ◽  
3D Printed ◽  
Inkjet Printing Technology ◽  
Alginate Scaffold

Three-dimensional (3D) printing has been playing an important role in diverse areas in medicine. In order to promote the development of tissue engineering, this study attempts to fabricate tissue engineering scaffolds using the inkjet printing technology. Sodium alginate, exhibiting similar properties to the native human extracellular matrix (ECM), was used as bioink. The jetted fluid of sodium alginate would be gelatinized when printed into the calcium chloride solution. The characteristics of the 3D-printed sodium alginate scaffold were systematically measured and analyzed. The results show that, the pore size, porosity and degradation property of these scaffolds could be well controlled. This study indicates the capability of 3D bioprinting technology for preparing tissue engineering scaffolds.

scholarly journals Hybrid Tissue Engineering Scaffolds by Combination of Three-Dimensional Printing and Cell Photoencapsulation

2015 ◽  
Vol 6 (2) ◽  
Author(s):  
Marica Markovic ◽  
Jasper Van Hoorick ◽  
Katja Hölzl ◽  
Maximilian Tromayer ◽  
Peter Gruber ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
Fused Deposition Modeling ◽  
Structural Parameters ◽  
Three Dimensional ◽  
Poly Lactic Acid ◽  
Tissue Engineering Scaffolds ◽  
Ecm Remodeling ◽  
Initial Cell ◽  
Fused Deposition ◽  
Hydrogel Matrix

Three-dimensional (3D) printing offers versatile possibilities for adapting the structural parameters of tissue engineering scaffolds. However, it is also essential to develop procedures allowing efficient cell seeding independent of scaffold geometry and pore size. The aim of this study was to establish a method for seeding the scaffolds using photopolymerizable cell-laden hydrogels. The latter facilitates convenient preparation, and handling of cell suspension, while distributing the hydrogel precursor throughout the pores, before it is cross-linked with light. In addition, encapsulation of living cells within hydrogels can produce constructs with high initial cell loading and intimate cell-matrix contact, similar to that of the natural extra-cellular matrix (ECM). Three dimensional scaffolds were produced from poly(lactic) acid (PLA) by means of fused deposition modeling. A solution of methacrylamide-modified gelatin (Gel-MOD) in cell culture medium containing photoinitiator Li-TPO-L was used as a hydrogel precursor. Being an enzymatically degradable derivative of natural collagen, gelatin-based matrices are biomimetic and potentially support the process of cell-induced remodeling. Preosteoblast cells MC3T3-E1 at a density of 10 × 106 cells per 1 mL were used for testing the seeding procedure and cell proliferation studies. Obtained results indicate that produced constructs support cell survival and proliferation over extended duration of our experiment. The established two-step approach for scaffold seeding with the cells is simple, rapid, and is shown to be highly reproducible. Furthermore, it enables precise control of the initial cell density, while yielding their uniform distribution throughout the scaffold. Such hybrid tissue engineering constructs merge the advantages of rigid 3D printed constructs with the soft hydrogel matrix, potentially mimicking the process of ECM remodeling.

scholarly journals A Nanofiber Mat With Dual Bioactive Components and a Biomimetic Matrix Structure for Improving Osteogenesis Effect

2021 ◽  
Vol 9 ◽  
Author(s):  
Yadi Han ◽  
Xiaofeng Shen ◽  
Sihao Chen ◽  
Xiuhui Wang ◽  
Juan Du ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
Lactic Acid ◽  
Bone Repair ◽  
Three Dimensional ◽  
Dimensional Structure ◽  
Bioactive Components ◽  
Tissue Engineering Scaffolds ◽  
Cell Growth And Migration ◽  
Nanofiber Mats

The challenge of effectively regenerating bone tissue through tissue engineering technology is that most tissue engineering scaffolds cannot imitate the three-dimensional structure and function of the natural extracellular matrix. Herein, we have prepared the poly(L-lactic acid)–based dual bioactive component reinforced nanofiber mats which were named as poly(L-lactic acid)/bovine serum albumin/nanohydroxyapatite (PLLA/BSA/nHAp) with dual bioactive components by combining homogeneous blending and electrospinning technology. The results showed that these nanofiber mats had sufficient mechanical properties and a porous structure suitable for cell growth and migration. Furthermore, the results of cell experiments in vitro showed that PLLA/BSA/nHAp composite nanofiber mat could preferably stimulate the proliferation of mouse osteoblastic cells (MC3T3 cells) compared with pure PLLA nanofiber mats. Based on these results, the scaffolds developed in this study are considered to have a great potential to be adhibited as bone repair materials.

Solvent Free Fabrication of Biodegradable Porous Polymers

2004 ◽  
Author(s):  
Xiaoxi Wang ◽  
Wei Li ◽  
Vipin Kumar
Keyword(s):  
Tissue Engineering ◽  
Polymer System ◽  
Solvent Free ◽  
Porous Polymers ◽  
Tissue Engineering Scaffolds ◽  
Co2 Gas ◽  
Biochemical Sensors ◽  
Foaming Process ◽  
Cell Structures ◽  
Chemical Blowing Agents

Biodegradable porous polymers with interconnected pores of sub-micrometers to a few hundred micrometers find many applications in emerging technology areas such as tissue engineering, controlled drug delivery, and biochemical sensors. However, most of the current fabrication processes involve organic solvents and chemical blowing agents that may cause environmental concerns and leave residues harmful to biological cells. This paper presents a solvent free fabrication approach for biodegradable porous polymers. Ultrasound cavitation is introduced after the solid state foaming process to produce open cell structures. The material used in this study is polylactic acid (PLA). It belongs to a family of biodegradable polymers that can be used for tissue engineering scaffolds. In order to identify suitable conditions to apply ultrasound, a saturation and foaming study is conducted for the PLA-CO2 gas polymer system. The effects of various process variables are discussed.

Thermal Processing of Tissue Engineering Scaffolds

2010 ◽  
Vol 133 (3) ◽  
Author(s):  
Alisa Morss Clyne
Keyword(s):  
Tissue Engineering ◽  
Thermal Processing ◽  
Three Dimensional ◽  
Processing Parameters ◽  
High Pressure Processing ◽  
Porous Scaffolds ◽  
Tissue Engineering Scaffolds ◽  
Thermally Induced ◽  
Advantages And Disadvantages ◽  
Particulate Leaching

Tissue engineering requires complex three-dimensional scaffolds that mimic natural extracellular matrix function. A wide variety of techniques have been developed to create both fibrous and porous scaffolds out of polymers, ceramics, metals, and composite materials. Existing techniques include fiber bonding, electrospinning, emulsion freeze drying, solvent casting/particulate leaching, gas foaming/particulate leaching, high pressure processing, and thermally induced phase separation. Critical scaffold properties, including pore size, porosity, pore interconnectivity, and mechanical integrity, are determined by thermal processing parameters in many of these techniques. In this review, each tissue engineering scaffold preparation method is discussed, including recent advancements as well as advantages and disadvantages of the technique, with a particular emphasis placed on thermal parameters. Improvements on these existing techniques, as well as new thermal processing methods for tissue engineering scaffolds, will be needed to provide tissue engineers with finer control over tissue and organ development.

APPLICATIONS OF CALCIUM PHOSPHATE NANOPARTICLES IN POROUS HARD TISSUE ENGINEERING SCAFFOLDS

NANO ◽  
2012 ◽  
Vol 07 (04) ◽  
pp. 1230004 ◽  
Author(s):  
ZHE WANG ◽  
ZHURONG TANG ◽  
FANGZHU QING ◽  
YOULIANG HONG ◽  
XINGDONG ZHANG
Keyword(s):  
Tissue Engineering ◽  
Calcium Phosphate ◽  
Bone Tissue Engineering ◽  
Bone Tissue ◽  
Three Dimensional ◽  
Porous Scaffolds ◽  
Tissue Engineering Scaffolds ◽  
Important Approach ◽  
Calcium Phosphate Nanoparticles ◽  
Hard Tissue Engineering

To repair bone defects, an important approach is to fabricate tissue engineering scaffolds as substitutions to replace auto-/allologous bones. Currently, processing a biomaterial into three-dimensional porous scaffolds and incorporating the calcium phosphate (Ca–P) nanoparticles into scaffolds profile two main characteristics of bone tissue engineering scaffolds. Based on this fact, in this paper we describe the design principles of the Ca–P nanoparticle-based and porous bone tissue engineering scaffolds. Then we summarize a variety of the Ca–P nanoparticle-based scaffolds, including discussion of the integration of the Ca–P nanoparticles with ceramics and polymers, followed by introduction of safety of the Ca–P nanoparticles in scaffolds.

Sign in / Sign up

Export Citation Format

Share Document