Effect of addition of glycolysis products of poly(ethyleneterephthalate) wastes to urea-formaldehyde resin on its adhesion performance to wood substrates and formaldehyde emission

2011 ◽  
Vol 123 (4) ◽  
pp. 2377-2383 ◽  
Author(s):  
Hisham A. Essawy ◽  
Magda E. Tawfik ◽  
Nadia H. Elsayed
Keyword(s):  
Urea Formaldehyde ◽  
Formaldehyde Emission ◽  
Urea Formaldehyde Resin ◽  
Formaldehyde Resin ◽  
Adhesion Performance

The Impact of Different Dosage of Additives on the UF Resin Used in Plywood

2011 ◽  
Vol 197-198 ◽  
pp. 147-150 ◽  
Author(s):  
Wei Wang ◽  
Li Bin Zhu ◽  
Ji You Gu ◽  
Xiang Li Weng ◽  
Hai Yan Tan
Keyword(s):  
Urea Formaldehyde ◽  
Formaldehyde Emission ◽  
Urea Formaldehyde Resin ◽  
Formaldehyde Resin ◽  
Synthetic Process ◽  
Resin Adhesive ◽  
Environmental Friendly ◽  
Uf Resin ◽  
Comprehensive Performance ◽  
The Impact

Through the study of the effects of different dosage of additives on the properties of urea formaldehyde resin adhesive prepared at low mole ratio of formaldehyde/urea, optimize the synthetic process of the UF resin which is used at the E0 grade plywood. The results showed that the product synthesized under the following condition: the mole ratio of formaldehyde/urea is 0.99:1, the dosage of the specific additive is 1.0% and that of melamine is 3-4%, had a good comprehensive performance and the formaldehyde emission of the plywood meets the E0 grade which is environmental-friendly.

scholarly journals Reduction of formaldehyde emission from urea-formaldehyde resin with a small quantity of graphene oxide

RSC Advances ◽  
2021 ◽  
Vol 11 (52) ◽  
pp. 32830-32836
Author(s):  
Kazuki Saito ◽  
Yasushi Hirabayashi ◽  
Shinya Yamanaka
Keyword(s):  
Graphene Oxide ◽  
Urea Formaldehyde ◽  
Formaldehyde Emission ◽  
Urea Formaldehyde Resin ◽  
Formaldehyde Resin ◽  
Uf Resin

This is the first experiment to demonstrate that GO effectively prevents formaldehyde emission from UF resin.

scholarly journals THE SOY FLOUR AS AN EXTENDER FOR UF AND MUF ADHESIVES IN BIRCH PLYWOOD PRODUCTION

Wood Research ◽  
2021 ◽  
Vol 66 (6) ◽  
pp. 1015-1031
Author(s):  
JAKUB KAWALERCZYK ◽  
JOANNA SIUDA ◽  
DOROTA DZIURKA ◽  
RADOSŁAW MIRSKI ◽  
MAGDALENA WOŹNIAK ◽  
...  
Keyword(s):  
Chemical Interaction ◽  
Urea Formaldehyde ◽  
Formaldehyde Emission ◽  
Solid Content ◽  
Urea Formaldehyde Resin ◽  
Soy Flour ◽  
Formaldehyde Resin ◽  
Gel Time ◽  
Major Disadvantage ◽  
Muf Adhesives

Formaldehyde emission still remains a major disadvantage of widely applied formaldehyde-containing amino resins such as UF (urea-formaldehyde) resin and MUF (melamine-urea-formaldehyde) resin. The compositions of adhesives for plywood manufacturing have to contain a proper extenders in order to adjust their viscosity. Thus, the aim of the study was to investigate the effect of protein-rich soy flour (SF) as the extender for adhesives. The composition of flours and their ability to absorb the formaldehyde were determined. Properties of liquid resins such as gel time, viscosity, pH and solid content were investigated. The possible chemical interaction between the extenders and resins were assessed with the use of FTIR spectroscopy. Plywood panels manufactured using UF and MUF adhesives with the soy flour introduced as the extender in various concentrations were tested in terms of shear strength and formaldehyde release. Studies have shown that soy flour has a favorable composition and formaldehyde-scavenging ability. The addition of SF affected resins properties such as viscosity and gel time but showed no influence on their pH and solid content. FTIR analysis has not explained the chemical interaction between resin and extender. The application of soy flour in the concentration of 15% for UF resin and 10% for MUF resin allowed to produce plywood characterized by improved bonding quality and decreased formaldehyde emission.

Thermal Behavior Analysis of Melamine Modified Urea-Formaldehyde Resin with Different Molar Ratios

2020 ◽  
Vol 1001 ◽  
pp. 61-66
Author(s):  
Shan Feng Xu ◽  
San Shan Xia ◽  
Yu Zhu Chen ◽  
Hui Xiao ◽  
Ming Wei Jing ◽  
...  
Keyword(s):  
Activation Energy ◽  
Urea Formaldehyde ◽  
Formaldehyde Emission ◽  
Urea Formaldehyde Resin ◽  
Molar Ratio ◽  
Formaldehyde Resin ◽  
Molar Ratios ◽  
High Molar Ratio ◽  
Degradation Properties ◽  
Modified Urea

In this study, Thermogravimetry (TG) were used to analyze thermal degradation properties of two kinds of low-molar ratio of the melamine-modified urea-formaldehyde resin (MUF). The MUF was calculated using Kissinger equation and Flynn-Wall-Ozawa equation Resin pyrolysis activation energy. The results showed that the curing time of low mole was longer than that of MUF resin (muf-b), the content of free formaldehyde was lower, and the formaldehyde emission and wet bonding strength of plywood were reduced by 65.79% and 21.90%, respectively. TG test showed that the pyrolysis process of MUF resins with different molar ratios can be divided into three stages: dehydration, rapid pyrolysis and carbonization. At the same heating rate, the weight loss rate, peak conversion rate and carbon residue of the high molar ratio MUF resin (MUF-a) in the fast pyrolysis stage are larger than those of the MUF-b resin. The MUF-a resin pyrolysis activation energy is 166.76 kJ/mol, and the MUF-b resin pyrolysis activation energy is 95.30 kJ/mol. High molar ratio resin has higher pyrolysis activation energy and better thermal stability.

scholarly journals Effects of Synthesized Condition of Urea-Formaldehyde Resin on theInitial Formaldehyde Emission Properties of Plywood

2000 ◽  
Vol 36 (7) ◽  
pp. 265-271
Author(s):  
Kensuke KAWARADA ◽  
Takahiko IIDA ◽  
Masahiro SHIMADA ◽  
Masahar OHMI ◽  
Hiroshi TOMINAG
Keyword(s):  
Urea Formaldehyde ◽  
Formaldehyde Emission ◽  
Urea Formaldehyde Resin ◽  
Formaldehyde Resin ◽  
Emission Properties
Sign in / Sign up

Export Citation Format

Share Document