Effect of epoxidized natural rubber on thermal properties, fatigue life, and natural weathering test of styrene butadiene rubber/recycled acrylonitrile-butadiene rubber (SBR/NBRr) blends

2011 ◽  
Vol 123 (2) ◽  
pp. 779-787 ◽  
Author(s):  
Nik Zulkepli Noriman ◽  
Hanafi Ismail
Keyword(s):  
Thermal Properties ◽  
Fatigue Life ◽  
Natural Rubber ◽  
Natural Weathering ◽  
Epoxidized Natural Rubber ◽  
Styrene Butadiene Rubber ◽  
Butadiene Rubber ◽  
Acrylonitrile Butadiene Rubber ◽  
Styrene Butadiene

scholarly journals Development of SBR-Nanoclay Composites with Epoxidized Natural Rubber as Compatibilizer

2009 ◽  
Vol 2009 ◽  
pp. 1-5 ◽  
Author(s):  
R. Rajasekar ◽  
Gert Heinrich ◽  
Amit Das ◽  
Chapal Kumar Das
Keyword(s):  
Natural Rubber ◽  
Epoxidized Natural Rubber ◽  
Rubber Matrix ◽  
Styrene Butadiene Rubber ◽  
Butadiene Rubber ◽  
Damping Characteristics ◽  
Transmission Electron ◽  
Organically Modified ◽  
The Matrix ◽  
Styrene Butadiene

The significant factor that determines the improvement of properties in rubber by the incorporation of nanoclay is its distribution in the rubber matrix. The simple mixing of nonpolar rubber and organically modified nanoclay will not contribute for the good dispersion of nanofiller in the rubbery matrix. Hence a polar rubber like epoxidized natural rubber (ENR) can be used as a compatibilizer in order to obtain a better dispersion of the nanoclay in the matrix polymer. Epoxidized natural rubber and organically modified nanoclay composites (EC) were prepared by solution mixing. The nanoclay employed in this study is Cloisite 20A. The obtained nanocomposites were incorporated in styrene butadiene-rubber (SBR) compounds with sulphur as a curing agent. The morphology observed through X-ray diffraction (XRD) and high-resolution transmission electron microscopy (HR-TEM) shows that the nanoclay is highly intercalated in ENR, and further incorporation of EC in SBR matrix leads to partial exfoliation of the nanoclay. Dynamic mechanical thermal analysis showed an increase in storage modulus and lesser damping characteristics for the compounds containing EC loading in SBR matrix. In addition, these compounds showed improvement in the mechanical properties.

scholarly journals EFFECT OF EPOXIDIZED NATURAL RUBBER AS A COMPATIBILIZER IN SILICA-FILLED STYRENE BUTADIENE RUBBER COMPOUND

2014 ◽  
Vol 3 (2) ◽  
pp. 1-4
Author(s):  
Indra Surya ◽  
Siswarni MZ
Keyword(s):  
Tensile Strength ◽  
Natural Rubber ◽  
Tensile Modulus ◽  
Epoxidized Natural Rubber ◽  
Styrene Butadiene Rubber ◽  
Butadiene Rubber ◽  
Rubber Compound ◽  
Cure Rate ◽  
Styrene Butadiene ◽  
Rubber Filler

By using a semi-efficient vulcanization system, the effect of Epoxidized Natural Rubber (ENR) as a compatibilizer in silica-filled Styrene Butadiene Rubber (SBR) compound was carried out. The ENR was incorporated into the silica-filled SBR compound at 5.0 and 10.0 phr. An investigation was carried out to examine the effect of ENR on cure characteristics and tensile properties of the silica-filled SBR compound. It was found that ENR gave enhanced cure rate to the silica-filled SBR compound. ENR also exhibited a higher torque difference, tensile modulus, and tensile strength up to 10.0 phr. The study of rubber - filler interaction proved that the addition of ENR to the silica-filled SBR system improved the rubber - filler interaction.

Sign in / Sign up

Export Citation Format

Share Document