Poly(dimethylsiloxane)urethane-co-poly(methyl methacrylate) with 2,4-toluene diisocyanate andm-xylene diisocyanate. I. Compatibility and impact strength of copolymers

2002 ◽  
Vol 83 (9) ◽  
pp. 1875-1885 ◽  
Author(s):  
Chen-Chi M. Ma ◽  
Yi-Chang Du ◽  
Feng-Yih Wang ◽  
Hui-Chung Wang ◽  
Jen-Chang Yang
Keyword(s):  
Impact Strength ◽  
Methyl Methacrylate ◽  
Toluene Diisocyanate ◽  
Poly Methyl Methacrylate

scholarly journals Effect of Antibacterial Silver-Releasing Filler on the Physicochemical Properties of Poly(Methyl Methacrylate) Denture Base Material

Materials ◽  
2019 ◽  
Vol 12 (24) ◽  
pp. 4146 ◽  
Author(s):  
Grzegorz Chladek ◽  
Katarzyna Pakieła ◽  
Wojciech Pakieła ◽  
Jarosław Żmudzki ◽  
Marcin Adamiak ◽  
...  
Keyword(s):  
Impact Strength ◽  
Flexural Strength ◽  
Methyl Methacrylate ◽  
Flexural Modulus ◽  
Base Material ◽  
Distilled Water ◽  
Denture Base ◽  
Inorganic Particles ◽  
Poly Methyl Methacrylate ◽  
Enhanced Solubility

Colonization of polymeric dental prosthetic materials by yeast-like fungi and the association of these microorganisms with complications occurring during prosthetic treatment are important clinical problems. In previously presented research, submicron inorganic particles of silver sodium hydrogen zirconium phosphate (S–P) were introduced into poly(methyl methacrylate) (PMMA) denture base material which allowed for obtaining the antimicrobial effect during a 90 day experiment. The aim of the present study was to investigate the flexural strength, impact strength, hardness, wear resistance, sorption, and solubility during three months of storage in distilled water. With increasing S–P concentration after 2 days of conditioning in distilled water, reduced values of flexural strength (107–72 MPa), impact strength (18.4–5.5 MPa) as well as enhanced solubility (0.95–1.49 µg/mm3) were registered, but they were at acceptable levels, and the sorption was stable. Favorable changes included increased hardness (198–238 MPa), flexural modulus (2.9–3.3 GPa), and decreased volume loss during wear test (2.9–0.2 mm3). The percentage changes of the analyzed properties during the 90 days of storage in distilled water were similar for all materials.

Effects of Poly(Methyl Methacrylate)-Encapsulated Nanosilica on Mechanical Properties of Poly(Lactic Acid)/Ethylene Vinyl Acetate Nanocomposites

2018 ◽  
Vol 773 ◽  
pp. 51-55
Author(s):  
Jasmine Pongkasem ◽  
Saowaroj Chuayjuljit ◽  
Phasawat Chaiwutthinan ◽  
Amnouy Larpkasemsuk ◽  
Anyaporn Boonmahitthisud
Keyword(s):  
Mechanical Properties ◽  
Lactic Acid ◽  
Impact Strength ◽  
Methyl Methacrylate ◽  
Tensile Properties ◽  
Vinyl Acetate ◽  
Ethylene Vinyl Acetate ◽  
Poly Lactic Acid ◽  
Poly Methyl Methacrylate ◽  
The Impact

In this study, poly(lactic acid) (PLA) was melt mixed with three weight percentages (10–30wt%) of ethylene vinyl acetate copolymer (EVA) in an internal mixer, followed by a compression molding. According to a better combination of mechanical properties, the 90/10 (w/w) PLA/EVA was selected for preparing hybrid nanocomposites with three loadings (1, 3 and 5 parts per hundred of resin , phr) of poly(methyl methacrylate)-encapsulated nanosilica (PMMA-nSiO2). The nanolatex of PMMA-nSiO2 was synthesized via in situ differential microemulsion polymerization. The obtained PMMA-nSiO2 showed a core-shell morphology with nSiO2 as a core and PMMA as a shell, having an average diameter of 43.4nm. The influences of the EVA and PMMA-nSiO2 on the impact strength and the tensile properties of the PLA/EVA nanocomposites were studied and compared. It is found that the impact strength and the tensile properties of the 90/10 (w/w) PLA/EVA were improved with the appropriate amounts of the EVA and PMMA-nSiO2.

Preparation of poly(methyl methacrylate) nanocomposites with superior impact strength

2007 ◽  
Vol 105 (6) ◽  
pp. 3183-3194 ◽  
Author(s):  
Dhananjay Singh ◽  
T. Jayasimha ◽  
K. N. Rai ◽  
Anil Kumar
Keyword(s):  
Impact Strength ◽  
Methyl Methacrylate ◽  
Poly Methyl Methacrylate

scholarly journals Kinetics of formation and viscoelastic and mechanical properties of optically transparent interpenetrating networks of poly(methyl methacrylate)/polyurethane

2020 ◽  
pp. 83-90
Keyword(s):  
Mechanical Properties ◽  
Impact Strength ◽  
Methyl Methacrylate ◽  
Polymer Networks ◽  
Interpenetrating Polymer Network ◽  
Interpenetrating Networks ◽  
Poly Methyl Methacrylate ◽  
Breaking Elongation ◽  
Optically Transparent ◽  
The Impact

An optically transparent material with enhanced physical-mechanical properties was synthesized, which is based on the in situ formed sequential interpenetrating polymer networks of poly(methyl methacrylate)/polyurethane with an oligoester component. The kinetic features of polymerization of methyl methacrylate in these systems were studied. It was established that the polymerization rate of methyl methacrylate increases with an increase in the content of a polyurethane component, which results from an increase in the system viscosity. Irrespective of the content of polyurethane (15, 20 or 25 wt.%), optically transparent materials with a light transmission coefficient of about 90% were formed. The method of dynamic mechanical analysis showed that the modification of cross-linked poly(methyl methacrylate) with cross-linked polyurethane led to a decrease in the value of the elastic modulus; the value of the loss modulus being increased with an increase in polyurethane content. This indicated bot a decrease in fragility and the improvement in impact strength of the glass-like material. According to the study of physical-mechanical properties of the materials, the presence of polyurethane in their composition resulted in an increase in the impact strength and relative breaking elongation and in the reduction of the Young modulus. It was found that the interpenetrating polymer network containing 20% of polyurethane showed the best values of breaking strength, breaking elongation and Charpy impact.

Sign in / Sign up

Export Citation Format

Share Document