Effects of hygrothermally decomposed polyurethane on the curing and mechanical properties of carbon black-filled epoxidized natural rubber vulcanizates

2002 ◽  
Vol 84 (12) ◽  
pp. 2265-2276 ◽  
Author(s):  
Z. A. Mohd Ishak ◽  
P. Y. Wan ◽  
P. L. Wong ◽  
Z. Ahmad ◽  
U. S. Ishiaku ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Carbon Black ◽  
Natural Rubber ◽  
Epoxidized Natural Rubber ◽  
Natural Rubber Vulcanizates

scholarly journals Studies on the Physicochemical and Physico-Mechanical Properties of Activated Palm Kernel Shell blended with Carbon Black filled NR Vulcanizates

2020 ◽  
Vol 5 (1) ◽  
Author(s):  
Dosu Malomo ◽  
Abdulhakeem D Olasupo ◽  
Abayomi M Adesigbin ◽  
Owen Egharevba ◽  
Sulaiman O Adewuyi ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Carbon Black ◽  
Natural Rubber ◽  
Chemical Activation ◽  
Palm Kernel ◽  
Young Modulus ◽  
Filler Loading ◽  
Ash Content ◽  
Palm Kernel Shell ◽  
Natural Rubber Vulcanizates

Palm kernel shell was activated using chemical activation of H3PO4 and KOH. Various amounts of activated palm kernel shell (APKS) couple with carbon black (CB) and other conventional ingredients were used to produce natural rubber vulcanizates (NR vulcanizates). The NR vulcanizates were compounded on a two-row mill and tested for its physico-mechanical properties. The results for characterization of physicochemical properties carried out on APKS  were ash content (2.06%), moisture content (8.06%), %carbon (54.41%), particle size (4.00, 3.35, 2.00, 1.18mm), bulk density (0.62g/ml) and pH (5.3).The results show significant values for all, the moisture and ash content were within the recommended standard of ASTM (3-10max) and (< or =8) respectively. The filler loading concentrations CB/APKS were labeled as mixes 1 to 7. The composition of CB/APKS filler loading ratios were 30:0, 25:5, 20:10, 15:15, 10:20, 5:25, and 0:30 samples 1,2,3,4,5,6 and 7 respectively. Results obtained showed that CB/APKS filled vulcanizates exhibited improvement in the physico-mechanical properties investigated. The results obtained for CB/APKS across the samples filler loading shows that CB composition possess higher UTS, EB and rubber fatigue test while APKS filler loading composition exhibited higher hardness and young modulus. Abrasion resistance was excellent for both CB and APKS filler loading composition.Keywords: Activated Palm Kernel Shell, filler, carbon black, Chemical Activation, Natural Rubber.

Influence of carbon black/silica ratio on the physical and mechanical properties of composites based on epoxidized natural rubber

2015 ◽  
Vol 50 (3) ◽  
pp. 377-386 ◽  
Author(s):  
Omar A Al-Hartomy ◽  
Ahmed A Al-Ghamdi ◽  
Said A Farha Al Said ◽  
Nikolay Dishovsky ◽  
Mihail Mihaylov ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Carbon Black ◽  
Natural Rubber ◽  
Physical And Mechanical Properties ◽  
Epoxidized Natural Rubber ◽  
Silica Ratio ◽  
Properties Of Composites

Influence of Pyrolytic Carbon Black Prepared from Waste Tires on Mechanical Properties of Natural Rubber Vulcanizates

2017 ◽  
Vol 751 ◽  
pp. 332-336 ◽  
Author(s):  
Sarawut Prasertsri ◽  
Sansanee Srichan
Keyword(s):  
Mechanical Properties ◽  
Carbon Black ◽  
Natural Rubber ◽  
Pyrolytic Carbon ◽  
Filler Loading ◽  
Elongation At Break ◽  
Cure Time ◽  
Mooney Viscosity ◽  
Heat Build Up ◽  
Natural Rubber Vulcanizates

This research aimed to investigate the possibility of pyrolytic carbon black (PCB) used as filler in natural rubber (NR) and its effect on Mooney viscosity, cure characteristics and mechanical properties compared with commercial carbon black (N774). The results revealed that Mooney viscosity, stiffness and heat build-up tended to increase with increasing both PCB and N774 loading, whereas elongation at break decreased. However, the maximum tensile and tear strengths appeared at the optimum filler loading for both PCB and N774. At similar filler content, PCB-filled NR compounds have higher cure time, heat build-up and thermal resistance. Nevertheless, they exhibited lower Mooney viscosity and mechanical properties compared to N774-filled NR. Finally, it can be concluded that PCB could be utilized as filler in NR compound to act as semi-reinforcing filler and was classified as a filler to reduce costs.

Sign in / Sign up

Export Citation Format

Share Document