Plasmonic Colloidosomes as Three-Dimensional SERS Platforms with Enhanced Surface Area for Multiphase Sub-Microliter Toxin Sensing

2015 ◽  
Vol 127 (33) ◽  
pp. 9827-9831 ◽  
Author(s):  
Gia Chuong Phan-Quang ◽  
Hiang Kwee Lee ◽  
In Yee Phang ◽  
Xing Yi Ling
Keyword(s):  
Surface Area ◽  
Three Dimensional ◽  
Enhanced Surface

Enhanced hydrothermal conversion of surfactant-modified diatom microshells into barium titanate replicas

2007 ◽  
Vol 22 (5) ◽  
pp. 1121-1127 ◽  
Author(s):  
Eric M. Ernst ◽  
Ben C. Church ◽  
Christopher S. Gaddis ◽  
Robert L. Snyder ◽  
Kenneth H. Sandhage
Keyword(s):  
Barium Titanate ◽  
Surface Area ◽  
Diatomaceous Earth ◽  
Hydrothermal Reaction ◽  
Three Dimensional ◽  
Chem Phys ◽  
Hydrothermal Conversion ◽  
Shape Preserving ◽  
Phase Pure ◽  
Enhanced Surface

The three-dimensional nanostructured SiO2-based microshells of diatoms have been converted into nanocrystalline BaTiO3 via a series of shape-preserving reactions. The microshells, obtained as diatomaceous earth, were first exposed to a surfactant-induced dissolution/reprecipitation process [C.E. Fowler, et al., Chem. Phys. Lett.398, 414 (2004)] to enhance the microshell surface area, without altering the microshell shape. The SiO2 microshells were then converted into anatase TiO2 replicas via reaction with TiF4 gas and then humid oxygen. Hydrothermal reaction with a barium hydroxide-bearing solution then yielded three-dimensional nanocrystalline microshell replicas composed of BaTiO3. The enhanced surface area of the surfactant-treated microshells resulted in faster conversion into phase-pure BaTiO3 at 100 °C.

Plasmonic Colloidosomes as Three-Dimensional SERS Platforms with Enhanced Surface Area for Multiphase Sub-Microliter Toxin Sensing

2015 ◽  
Vol 54 (33) ◽  
pp. 9691-9695 ◽  
Author(s):  
Gia Chuong Phan-Quang ◽  
Hiang Kwee Lee ◽  
In Yee Phang ◽  
Xing Yi Ling
Keyword(s):  
Surface Area ◽  
Three Dimensional ◽  
Enhanced Surface

Low-Degree Tibial Slope Angle Prevents Component Overhang by Enlarging the Lateral Plateau Surface Area in Total Knee Arthroplasty

2020 ◽  
Author(s):  
Mehmet Emin Simsek ◽  
Mustafa Akkaya ◽  
Safa Gursoy ◽  
Özgür Kaya ◽  
Murat Bozkurt
Keyword(s):  
Total Knee Arthroplasty ◽  
Surface Area ◽  
Knee Arthroplasty ◽  
Tibial Plateau ◽  
Slope Angle ◽  
Three Dimensional ◽  
Tibial Slope ◽  
Total Knee ◽  
Lateral Plateau ◽  
Gender Groups

AbstractThis study aimed to investigate whether overhang or underhang around the tibial component that occurs during the placement of tibial baseplates was affected by different slope angles of the tibial plateau and determine the changes in the lateral and medial plateau diameters while changing the slope angle in total knee arthroplasty. Three-dimensional tibia models were reconstructed using the computed tomography scans of 120 tibial dry bones. Tibial plateau slope cuts were performed with 9, 7, 5, 3, and 0 degrees of slope angles 2-mm below the subchondral bone in the deepest point of the medial plateau. Total, lateral, and medial tibial plateau areas and overhang/underhang rates were measured at each cut level. Digital implantations of the asymmetric and symmetric tibial baseplates were made on the tibial plateau with each slope angles. Following the implantations, the slope angle that prevents overhang or underhang at the bone border and the slope angle that has more surface area was identified. A significant increase was noted in the total tibial surface area, lateral plateau surface area, and lateral anteroposterior distance, whereas the slope cut angles were changed from 9 to 0 degrees in both gender groups. It was found that the amount of posteromedial underhang and posterolateral overhang increased in both the asymmetric and symmetric tibial baseplates when the slope angle was changed from 0 to 9 degrees. Although the mediolateral diameter did not change after the proximal tibia cuts at different slope angles, the surface area and anteroposterior diameter of the lateral plateau could change, leading to increased lateral plateau area. Although prosthesis designs are highly compatible with the tibial surface area, it should be noted that the component overhangs, especially beyond the posterolateral edge, it can be prevented by changing the slope cut angle in males and females.

3D reconstruction and calculation of surface area and volume of bell pepper

2007 ◽  
Vol 3 (1) ◽  
pp. 89-113
Author(s):  
Zoltán Gillay ◽  
László Fenyvesi
Keyword(s):  
3D Reconstruction ◽  
Surface Area ◽  
Three Dimensional ◽  
Reference Method ◽  
Bell Pepper ◽  
Three Dimensional Model ◽  
Acceptable Error ◽  
Volume Calculation ◽  
Bell Peppers ◽  
Area And Volume

There was a method developed that generates the three-dimensional model of not axisymmetric produce, based on an arbitrary number of photos. The model can serve as a basis for calculating the surface area and the volume of produce. The efficiency of the reconstruction was tested on bell peppers and artificial shapes. In case of bell peppers 3-dimensional reconstruction was created from 4 images rotated in 45° angle intervals. The surface area and the volume were estimated on the basis of the reconstructed area. Furthermore, a new and simple reference method was devised to give precise results for the surface area of bell pepper. The results show that this 3D reconstruction-based surface area and volume calculation method is suitable to determine the surface area and volume of definite bell peppers with an acceptable error.

Evaluation of a Three-Dimensional Stereophotogrammetric Method to Identify and Measure the Palatal Surface Area in Children with Unilateral Cleft Lip and Palate

2016 ◽  
Vol 53 (1) ◽  
pp. 16-21 ◽  
Author(s):  
Marcio De Menezes ◽  
Ana Maria Cerón-Zapata ◽  
Ana Maria López-Palacio ◽  
Andrea Mapelli ◽  
Luca Pisoni ◽  
...  
Keyword(s):  
Surface Area ◽  
Cleft Lip ◽  
Cleft Lip And Palate ◽  
Three Dimensional

Accelerating ion diffusion with unique three-dimensionally interconnected nanopores for self-membrane high-performance pseudocapacitors

Nanoscale ◽  
2017 ◽  
Vol 9 (46) ◽  
pp. 18311-18317 ◽  
Author(s):  
Yuan Gao ◽  
Yuanjing Lin ◽  
Zehua Peng ◽  
Qingfeng Zhou ◽  
Zhiyong Fan
Keyword(s):  
Aspect Ratio ◽  
Surface Area ◽  
Structural Stability ◽  
High Aspect Ratio ◽  
High Performance ◽  
Three Dimensional ◽  
Rate Capability ◽  
Large Surface Area ◽  
Nanoporous Structure ◽  
Ion Diffusion

Three-dimensional interconnected nanoporous structure (3-D INPOS) possesses high aspect ratio, large surface area, as well as good structural stability. Profiting from its unique interconnected architecture, the 3-D INPOS pseudocapacitor achieves a largely enhanced capacitance and rate capability.

Sign in / Sign up

Export Citation Format

Share Document