Hydrogenation of Phenol in Supercritical Carbon Dioxide Catalyzed by Palladium Supported on Al-MCM-41: A Facile Route for One-Pot Cyclohexanone Formation

2009 ◽  
Vol 351 (11-12) ◽  
pp. 1912-1924 ◽  
Author(s):  
M. Chatterjee ◽  
H. Kawanami ◽  
M. Sato ◽  
A. Chatterjee ◽  
T. Yokoyama ◽  
...  
2019 ◽  
Vol 9 (1) ◽  
Author(s):  
Chikara Tsutsumi ◽  
Souta Manabe ◽  
Susumu Nakayama ◽  
Yuushou Nakayama ◽  
Takeshi Shiono

Abstract This work studied the incorporation of essential bark oil from Thujopsis dolabrata var. hondae, which is known to repel various insects, in poly(L-lactide-ran-δ-valerolactone) [poly(L-LA-ran-VL)] using supercritical carbon dioxide (scCO2). The poly(L-LA-ran-VL) was synthesized by first purifying the monomers by azeotropic distillation with benzene, followed by polymerization with Sn(oct)2 using the same equipment, representing an efficient one-pot process. The copolymerization of L-LA with VL using this technique at a feed ratio of 90/10 mol/mol gave poly(L-LA-ran-VL) (91/9) with a molecular weight of 6.48 × 104 g/mol and a high yield of 74.9%. Products with molecular weights over 5.0 × 104 g/mol were obtained at L-LA feed proportions of 70 to 90%. Impregnation trials were conducted between 40 and 120 °C at 14 MPa for 3 h. The oil content of a 73/27 specimen was found to increase significantly during processing at 100 or 120 °C. During enzymatic degradation with proteinase K, the 91/9 specimen showed the fastest degradation rate. Although the 71/29 sample was slowly hydrolyzed in a phosphate buffer at pH 7.0, the release of oil vapor from this material was slightly higher than that from the 91/9 specimen, and the vapor release rate continuously increased throughout the hydrolysis process.


Langmuir ◽  
2010 ◽  
Vol 26 (4) ◽  
pp. 2707-2713 ◽  
Author(s):  
Muhammad B. I. Chowdhury ◽  
Rouhong Sui ◽  
Rahima A. Lucky ◽  
Paul A. Charpentier

e-Polymers ◽  
2015 ◽  
Vol 15 (4) ◽  
pp. 245-254 ◽  
Author(s):  
Wei Wang ◽  
Liqin Cao ◽  
Jide Wang ◽  
Jie Zhao ◽  
Xiujuan Wu ◽  
...  

AbstractPoly(1-vinylimidazole) (PVIm)/silica nanocomposite particles were prepared via free radical polymerization of VIm in the presence of unmodified silica and crosslinker N,N′-methylenebisacrylamide without any surfactant by a one-pot route in supercritical carbon dioxide. The strong acid-base interaction between the hydroxyl groups (acidic) of silica surfaces and the imidazole groups (basic) of 1-VIm was strong enough to promote the formation of long-stable PVIm/silica nanocomposite particles. Transmission electron microscopy and scanning electron microscopy results showed that the silica nanoparticles were encapsulated into the polymer and with a specific pore structure. Fourier transform infrared spectroscopy results suggested the strong interaction between PVIm and silica. The nanocomposites were shown to possess higher thermal stability than PVIm. A maximum surface area of 60.76 m2/g was obtained via standard nitrogen adsorption analysis. The property of the composite materials in terms of heavy metal ion removal was investigated. The maximum adsorption capacity of Cr (VI) is 331.5 mg/g in the experimental range.


Sign in / Sign up

Export Citation Format

Share Document