scholarly journals Deployable‐Structure‐Based Artificial Muscles Generating Coded Forces (Adv. Mater. Technol. 9/2021)

2021 ◽  
Vol 6 (9) ◽  
pp. 2170055
Author(s):  
Nan Yang ◽  
Yong Deng ◽  
Xiaodong Niu
Keyword(s):  
Artificial Muscles ◽  
Deployable Structure

Initial Study on Mission of Cubic Deployable Structure with Thin Membrane Circuit

2021 ◽  
Author(s):  
Shoko Arita ◽  
Yusuke Shimoda ◽  
Kazunari Toda ◽  
Yoshiki Yamagiwa
Keyword(s):  
Initial Study ◽  
Thin Membrane ◽  
Deployable Structure

Muscles

2018 ◽  
Author(s):  
Iain A. Anderson ◽  
Benjamin M. O’Brien
Keyword(s):  
Sensory Feedback ◽  
Artificial Muscles ◽  
Combustion Engines ◽  
Electric Motors ◽  
Home Appliances ◽  
Leg Muscles ◽  
Mechanical Devices ◽  
Control Surfaces

Mechanical devices that include home appliances, automobiles, and airplanes are typically driven by electric motors or combustion engines through gearboxes and other linkages. Airplane wings, for example, have hinged control surfaces such as ailerons. Now imagine a wing that has no hinged control surfaces or linkages but that instead bends or warps to assume an appropriate shape, like the wing of a bird. Such a device could be enabled using an electro-active polymer technology based on electronic artificial muscles. Artificial muscles act directly on a structure, like our leg muscles that are attached by tendon to our bones and that through phased contraction enable us to walk. Sensory feedback from our muscles enables proprioceptive control. So, for artificial muscles to be used appropriately we need to pay attention not only to mechanisms for muscle actuation but also to how we can incorporate self-sensing feedback for the control of position.

scholarly journals Supramolecular ionic polymer/carbon nanotube composite hydrogels with enhanced electromechanical performance

2020 ◽  
Vol 9 (1) ◽  
pp. 478-488 ◽  
Author(s):  
Yun-Fei Zhang ◽  
Fei-Peng Du ◽  
Ling Chen ◽  
Ka-Wai Yeung ◽  
Yuqing Dong ◽  
...  
Keyword(s):  
Carbon Nanotube ◽  
Ion Mobility ◽  
Artificial Muscles ◽  
Ionic Polymer ◽  
Composite Hydrogels ◽  
The Matrix ◽  
Electromechanical Performance ◽  
Carbon Nanotube Composite ◽  
Robotic Devices

AbstractElectroactive hydrogels have received increasing attention due to the possibility of being used in biomimetics, such as for soft robotics and artificial muscles. However, the applications are hindered by the poor mechanical properties and slow response time. To address these issues, in this study, supramolecular ionic polymer–carbon nanotube (SIPC) composite hydrogels were fabricated via in situ free radical polymerization. The polymer matrix consisted of carbon nanotubes (CNTs), styrene sulfonic sodium (SSNa), β-cyclodextrin (β-CD)-grafted acrylamide, and ferrocene (Fc)-grafted acrylamide, with the incorporation of SSNa serving as the ionic source. On applying an external voltage, the ions accumulate on one side of the matrix, leading to localized swelling and bending of the structure. Therefore, a controllable and reversible actuation can be achieved by changing the applied voltage. The tensile strength of the SIPC was improved by over 300%, from 12 to 49 kPa, due to the reinforcement effect of the CNTs and the supramolecular host–guest interactions between the β-CD and Fc moieties. The inclusion of CNTs not only improved the tensile properties but also enhanced the ion mobility, which lead to a faster electromechanical response. The presented electro-responsive composite hydrogel shows a high potential for the development of robotic devices and soft smart components for sensing and actuating applications.

A modified physical model of high-strength water hydraulic artificial muscles considering the effects of geometry and material properties

2021 ◽  
pp. 095440622199907
Author(s):  
Zengmeng Zhang ◽  
Jinkai Che ◽  
Peipei Liu ◽  
Yunrui Jia ◽  
Yongjun Gong
Keyword(s):  
Physical Model ◽  
Relative Error ◽  
Wall Thickness ◽  
Material Properties ◽  
High Strength ◽  
Artificial Muscles ◽  
Operating Pressure ◽  
Rubber Tube ◽  
Contraction Ratio ◽  
Water Hydraulic

Compared with pneumatic artificial muscles (PAMs), water hydraulic artificial muscles (WHAMs) have the advantages of high force/weight ratio, high stiffness, rapid response speed, large operating pressure range, low working noise, etc. Although the physical models of PAMs have been widely studied, the model of WHAMs still need to be researched for the different structure parameters and work conditions between PAMs and WHAMs. Therefore, the geometry and the material properties need to be considered in models, including the wall thickness of rubber tube, the geometry of ends, the elastic force of rubber tube, the elongation of fibers, and the friction among fiber strands. WHAMs with different wall thickness and fiber materials were manufactured, and static characteristic experiments were performed when the actuator is static and fixed on both ends, which reflects the relationship between contraction force and pressure under the different contraction ratio. The deviations between theoretical values and experimental results were analyzed to investigate the effect of each physical factor on the modified physical model accuracy at different operating pressures. The results show the relative error of the modified physical model was 7.1% and the relative error of the ideal model was 17.4%. When contraction ratio is below 10% and operating pressure is 4 MPa, the wall thickness of rubber tube was the strongest factor on the accuracy of modified model. When the WHAM contraction ratio from 3% to 20%, the relative error between the modified physical model and the experimental data was within ±10%. Considering the various physical factors, the accuracy of the modified physical model of WHAM is improved, which lays a foundation of non-linear control of the high-strength, tightly fiber-braided and thick-walled WHAMs.

scholarly journals An extended state observer-based full-order sliding mode control for robotic joint actuated by antagonistic pneumatic artificial muscles

2021 ◽  
Vol 18 (1) ◽  
pp. 172988142098603
Author(s):  
Daoxiong Gong ◽  
Mengyao Pei ◽  
Rui He ◽  
Jianjun Yu
Keyword(s):  
Sliding Mode Control ◽  
Sliding Mode ◽  
State Observer ◽  
Extended State Observer ◽  
Artificial Muscles ◽  
Extended State ◽  
Robot System ◽  
Mode Control ◽  
Physical Experiments ◽  
Pneumatic Artificial Muscles

Pneumatic artificial muscles (PAMs) are expected to play an important role in endowing the advanced robot with the compliant manipulation, which is very important for a robot to coexist and cooperate with humans. However, the strong nonlinear characteristics of PAMs hinder its wide application in robots, and therefore, advanced control algorithms are urgently needed for making the best use of the advantages and bypassing the disadvantages of PAMs. In this article, we propose a full-order sliding mode control extended state observer (fSMC-ESO) algorithm that combines the ESO and the fSMC for a robotic joint actuated by a pair of antagonistic PAMs. The fSMC is employed to eliminate the chattering and to guarantee the finite-time convergence, and the ESO is adopted to observe both the total disturbance and the states of the robot system, so that we can inhibit the disturbance and compensate the nonlinearity efficiently. Both simulations and physical experiments are conducted to validate the proposed method. We suggest that the proposed method can be applied to the robotic systems actuated by PAMs and remarkably improve the performance of the robot system.

scholarly journals Muscle-fiber array inspired, multiple-mode, pneumatic artificial muscles through planar design and one-step rolling fabrication

2021 ◽  
Author(s):  
Jiang Zou ◽  
Miao Feng ◽  
Ningyuan Ding ◽  
Peinan Yan ◽  
Haipeng Xu ◽  
...  
Keyword(s):  
Muscle Fiber ◽  
Artificial Muscles ◽  
Fiber Array ◽  
Fiber Arrays ◽  
Multiple Mode ◽  
Pneumatic Artificial Muscles ◽  
Pipe Line ◽  
One Step ◽  
Robotic Applications ◽  
Compliant Electrodes

Abstract Although the advances in artificial muscles enable creating soft robots with biological dexterity and self-adaption in unstructured environments, producing scalable artificial muscles with multiple-mode actuations is still elusive. Inspired by muscle-fiber arrays in muscular hydrostats, we present a class of versatile artificial muscles, called MAIPAMs (Muscle-fiber Array Inspired Pneumatic Artificial Muscles), capable of multiple-mode actuations (such as parallel elongation-bending-spiraling actuations, parallel 10 bending actuations, and cascaded elongation-bending-spiraling actuations). Our MAIPAMs mainly consist of active 3D elastomer-balloon arrays reinforced by a passive elastomer membrane, which is achieved through a planar design and one-step rolling fabrication approach. We introduce the prototypical designs of MAIPAMs and demonstrate their muscle-mimic structures and versatility, as well as their scalable ability to integrate flexible while un-stretchable layers for contraction and twisting actuations and compliant electrodes for self-sensing. We further demonstrate that this class of artificial muscles shows promising potentials for versatile robotic applications, such as carrying a camera for recording videos, gripping and manipulating objects, and climbing a pipe-line.

Athermal Artificial Muscles with Drastically Improved Work Capacity from pH-Responsive Coiled Polymer Fibers

2021 ◽  
pp. 129703
Author(s):  
Sevketcan Sarikaya ◽  
Frank Gardea ◽  
Jeffrey T. Auletta ◽  
Jamshid Kavosi ◽  
Alex Langrock ◽  
...  
Keyword(s):  
Work Capacity ◽  
Polymer Fibers ◽  
Artificial Muscles ◽  
Ph Responsive

High Toughness Polyurethane toward Artificial Muscles, Tuned by Mixing Dynamic Hard Domains

2021 ◽  
Author(s):  
Qiqi Qu ◽  
Jing He ◽  
Yunsheng Da ◽  
Menghan Zhu ◽  
Yanyan Liu ◽  
...  
Keyword(s):  
Artificial Muscles ◽  
High Toughness
Sign in / Sign up

Export Citation Format

Share Document