Preparation and Thermal Conductivity of Spark Plasma Sintered Aluminum Matrix Composites Reinforced with Titanium-Coated Graphite Fibers

2014 ◽  
Vol 17 (4) ◽  
pp. 502-511 ◽  
Author(s):  
Tingting Liu ◽  
Xinbo He ◽  
Qian Liu ◽  
Shubin Ren ◽  
Lin Zhang ◽  
...  
Keyword(s):  
Thermal Conductivity ◽  
Aluminum Matrix ◽  
Aluminum Matrix Composites ◽  
Matrix Composites ◽  
Sintered Aluminum ◽  
Spark Plasma ◽  
Graphite Fibers

Aluminum-Matrix Aluminum Nitride Particle Composite as a Low-Thermal-Expansion Thermal Conductor

1993 ◽  
Vol 323 ◽  
Author(s):  
Shy-Wen Lai ◽  
D. D. L. Chung
Keyword(s):  
Thermal Conductivity ◽  
Tensile Strength ◽  
Thermal Expansion ◽  
Volume Fraction ◽  
Liquid Aluminum ◽  
Aluminum Matrix ◽  
Aluminum Matrix Composites ◽  
Matrix Composites ◽  
Low Thermal Expansion ◽  
Increasing Temperature

AbstractAluminum-matrix composites containing AIN or SiC particles were fabricated by vacuum infiltration of liquid aluminum into a porous particulate preform under an argon pressure of up to 41 MPa. Al/AIN was superior to Al/SiC in thermal conductivity. At 59 vol.% AIN, Al/AlN had a thermal conductivity of 157 W/m. °C and a thermal expansion coefficient of 9.8 × 10−-6°C−1 (35–100 °C). Al/AlN had similar tensile strength and higher ductility compared to Al/SiC of a similar reinforcement volume fraction at room temperature, but exhibited higher tensile strength and higher ductility at 300–400°C. The ductility of Al/AlN increased with increasing temperature from 22 to 400°C, while that of Al/SiC did not change with temperature. The superior high temperature resistance of Al/AlN is attributed to the lack of a reaction between Al and AIN, in contrast to the reaction between Al and SiC in AI/SiC.

Corrosion Protection of Aluminum-Matrix Composites

1995 ◽  
Vol 390 ◽  
Author(s):  
Jiangyuan Hou ◽  
D. D. L. Chung
Keyword(s):  
Thermal Conductivity ◽  
Corrosion Resistance ◽  
Surface Treatment ◽  
Aluminum Matrix ◽  
Electrochemical Process ◽  
Aluminum Matrix Composites ◽  
Matrix Composites ◽  
Acid Electrolyte ◽  
Effective Surface ◽  
Aluminum Anodizing

ABSTRACTAluminum-matrix composites are attractive in their combination of low CTE and high thermal conductivity. Anodizing is an effective surface treatment for improving the corrosion resistance of aluminum-matrix composites. ForSiC filled aluminum, anodizing was performed successfully in an acid electrolyte, as usual. However, for AIN filled aluminum, anodizing needed to be performed in an alkaline (NaOH) electrolyte instead of an acid electrolyte, because NaOH reduced the reaction between AIN and water, whereas an acid enhanced this reaction. The concentration of NaOH in the electrolyte was critical; too high a concentration of NaOH caused the dissolution of the anodizing product (A12O3) by the NaOH, whereas too low a concentration of NaOH did not provide enough ions for the electrochemical process.

scholarly journals Effect of flake powder metallurgy on thermal conductivity of graphite flakes reinforced aluminum matrix composites

2018 ◽  
Vol 53 (11) ◽  
pp. 8180-8192 ◽  
Author(s):  
Nabil Chamroune ◽  
Diaa Mereib ◽  
Florence Delange ◽  
Nathalie Caillault ◽  
Yongfeng Lu ◽  
...  
Keyword(s):  
Thermal Conductivity ◽  
Powder Metallurgy ◽  
Aluminum Matrix ◽  
Aluminum Matrix Composites ◽  
Matrix Composites ◽  
Flake Powder Metallurgy
Sign in / Sign up

Export Citation Format

Share Document