Correlation Between Elastic Modulus, Shear Modulus, Poisson's Ratio and Porosity in Porous Materials

2008 ◽  
Vol 10 (3) ◽  
pp. 250-252 ◽  
Author(s):  
J. Kováčik
Keyword(s):  
Elastic Modulus ◽  
Shear Modulus ◽  
Porous Materials ◽  
Poisson’S Ratio ◽  
Poisson's Ratio

First-Principles Study of the Elastic Properties of Hexagonal Phase ScAx (A=H, He)

2013 ◽  
Vol 690-693 ◽  
pp. 1723-1727
Author(s):  
Kai Min Fan ◽  
Li Yang ◽  
Jing Tang ◽  
Qing Qiang Sun ◽  
Xiao Tao Zu
Keyword(s):  
Elastic Modulus ◽  
Shear Modulus ◽  
Bulk Modulus ◽  
First Principles ◽  
Poisson’S Ratio ◽  
Hexagonal Phase ◽  
Poisson's Ratio ◽  
First Principles Calculations ◽  
Charge Densities ◽  
Change Mechanism

First-principles calculations are performed to investigate the Young’s modulus, bulk modulus, shear modulus and Poisson’s ratio of hexagonal phase ScAx(A=H, He), where x=0, 0.0313, 0.125 and 0.25, represent the ratio of interstitial atoms A (A=H, He) to Sc atoms. The influences of hydrogen concentrations and helium concentrations on elastic modulus and Poisson’s ratio of ScAx(A=H, He) have been studied. The results indicate that hydrogen and helium have different effects on the elastic modulus of hexagonal phase scandium. The change mechanism of the Poisson’s ratio with the variation of the x ranging from 0 to 0.25 has also been studied in hexagonal phase ScAx(A=H, He). In addition, the changes in the charge densities of ScAxdue to the presence of hydrogen and helium have been calculated.

scholarly journals Elastic Mechanical Properties of 45S5-Based Bioactive Glass–Ceramic Scaffolds

Materials ◽  
2019 ◽  
Vol 12 (19) ◽  
pp. 3244 ◽  
Author(s):  
Francesco Baino ◽  
Elisa Fiume
Keyword(s):  
Mechanical Properties ◽  
Compressive Strength ◽  
Elastic Modulus ◽  
Shear Modulus ◽  
Glass Ceramic ◽  
Poisson’S Ratio ◽  
Mechanical Performance ◽  
Poisson's Ratio ◽  
Shear Moduli ◽  
Bioactive Scaffolds

Porosity is recognized to play a key role in dictating the functional properties of bioactive scaffolds, especially the mechanical performance of the material. The mechanical suitability of brittle ceramic and glass scaffolds for bone tissue engineering applications is usually evaluated on the basis of the compressive strength alone, which is relatively easy to assess. This work aims to investigate the porosity dependence of the elastic properties of silicate scaffolds based on the 45S5 composition. Highly porous glass–ceramic foams were fabricated by the sponge replica method and their elastic modulus, shear modulus, and Poisson’s ratio were experimentally determined by the impulse excitation technique; furthermore, the failure strength was quantified by compressive tests. As the total fractional porosity increased from 0.52 to 0.86, the elastic and shear moduli decreased from 16.5 to 1.2 GPa and from 6.5 to 0.43 GPa, respectively; the compressive strength was also found to decrease from 3.4 to 0.58 MPa, whereas the Poisson’s ratio increased from 0.2692 to 0.3953. The porosity dependences of elastic modulus, shear modulus and compressive strength obeys power-law models, whereas the relationship between Poisson’s ratio and porosity can be described by a linear approximation. These relations can be useful to optimize the design and fabrication of porous biomaterials as well as to predict the mechanical properties of the scaffolds.

The Model for Calculating Elastic Modulus and Poisson's Ratio of Coal Body

2013 ◽  
Vol 6 (1) ◽  
pp. 36-43 ◽  
Author(s):  
Ai Chi ◽  
Li Yuwei
Keyword(s):  
Elastic Modulus ◽  
Poisson’S Ratio ◽  
Fractured Rock ◽  
Rock Block ◽  
Poisson's Ratio ◽  
Linear Elastic ◽  
Study Results ◽  
The Face ◽  
Block Face ◽  
Coal Rock

Coal body is a type of fractured rock mass in which lots of cleat fractures developed. Its mechanical properties vary with the parametric variation of coal rock block, face cleat and butt cleat. Based on the linear elastic theory and displacement equivalent principle and simplifying the face cleat and butt cleat as multi-bank penetrating and intermittent cracks, the model was established to calculate the elastic modulus and Poisson's ratio of coal body combined with cleat. By analyzing the model, it also obtained the influence of the parameter variation of coal rock block, face cleat and butt cleat on the elastic modulus and Poisson's ratio of the coal body. Study results showed that the connectivity rate of butt cleat and the distance between face cleats had a weak influence on elastic modulus of coal body. When the inclination of face cleat was 90°, the elastic modulus of coal body reached the maximal value and it equaled to the elastic modulus of coal rock block. When the inclination of face cleat was 0°, the elastic modulus of coal body was exclusively dependent on the elastic modulus of coal rock block, the normal stiffness of face cleat and the distance between them. When the distance between butt cleats or the connectivity rate of butt cleat was fixed, the Poisson's ratio of the coal body initially increased and then decreased with increasing of the face cleat inclination.

Research on dynamic characteristics of gear system considering the influence of temperature on material performance

2021 ◽  
pp. 107754632110026
Author(s):  
Zhou Sun ◽  
Siyu Chen ◽  
Xuan Tao ◽  
Zehua Hu
Keyword(s):  
Elastic Modulus ◽  
Dynamic Characteristics ◽  
Poisson’S Ratio ◽  
Gear System ◽  
Poisson's Ratio ◽  
Effect Of Temperature ◽  
Time Varying ◽  
Influence Of Temperature ◽  
Meshing Stiffness ◽  
Influence Of Temperature On

Under high-speed and heavy-load conditions, the influence of temperature on the gear system is extremely important. Basically, the current work on the effect of temperature mostly considers the flash temperature or the overall temperature field to cause expansion at the meshing point and then affects nonlinear factors such as time-varying meshing stiffness, which lead to the deterioration of the dynamic transmission. This work considers the effect of temperature on the material’s elastic modulus and Poisson’s ratio and relates the temperature to the time-varying meshing stiffness. The effects of temperature on the elastic modulus and Poisson’s ratio are expressed as functions and brought into the improved energy method stiffness calculation formula. Then, the dynamic characteristics of the gear system are analyzed. With the bifurcation diagram, phase, Poincaré, and fast Fourier transform plots of the gear system, the influence of temperature on the nonlinear dynamics of the gear system is discussed. The numerical analysis results show that as the temperature increases, the dynamic response of the system in the middle-speed region gradually changes from periodic motion to chaos.

Measurement of Cement in Situ Stresses and Mechanical Properties Without Cooling or Depressurization

2021 ◽  
Author(s):  
Meng Meng ◽  
Luke Frash ◽  
James Carey ◽  
Wenfeng Li ◽  
Nathan Welch ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Mechanical Property ◽  
Elastic Modulus ◽  
Poisson’S Ratio ◽  
Axial Stress ◽  
Triaxial Compression ◽  
In Situ Measurement ◽  
Poisson's Ratio ◽  
Ambient Conditions

Abstract Accurate characterization of oilwell cement mechanical properties is a prerequisite for maintaining long-term wellbore integrity. The drawback of the most widely used technique is unable to measure the mechanical property under in situ curing environment. We developed a high pressure and high temperature vessel that can hydrate cement under downhole conditions and directly measure its elastic modulus and Poisson's ratio at any interested time point without cooling or depressurization. The equipment has been validated by using water and a reasonable bulk modulus of 2.37 GPa was captured. Neat Class G cement was hydrated in this equipment for seven days under axial stress of 40 MPa, and an in situ measurement in the elastic range shows elastic modulus of 37.3 GPa and Poisson's ratio of 0.15. After that, the specimen was taken out from the vessel, and setted up in the triaxial compression platform. Under a similar confining pressure condition, elastic modulus was 23.6 GPa and Possion's ratio was 0.26. We also measured the properties of cement with the same batch of the slurry but cured under ambient conditions. The elastic modulus was 1.63 GPa, and Poisson's ratio was 0.085. Therefore, we found that the curing condition is significant to cement mechanical property, and the traditional cooling or depressurization method could provide mechanical properties that were quite different (50% difference) from the in situ measurement.

scholarly journals Effect of Temperature on Formaldehyde Diffusion in Cellulose Amorphous Region: A Simulation Study

BioResources ◽  
2021 ◽  
Vol 16 (2) ◽  
pp. 3200-3213
Author(s):  
Wei Wang ◽  
Yancai Cao ◽  
Liyue Sun ◽  
Mingshuai Wu
Keyword(s):  
Shear Modulus ◽  
Bulk Modulus ◽  
Poisson’S Ratio ◽  
Amorphous Region ◽  
Poisson's Ratio ◽  
Effect Of Temperature ◽  
External Temperature ◽  
Practical Applications ◽  
Region Model ◽  
Materials Studio

A formaldehyde-cellulose amorphous region model at the micro-level was established using the molecular dynamics software Materials Studio to simulate the change of cellulose and formaldehyde molecules in an external temperature field. The diffusion coefficients of formaldehyde molecules increased as the temperature increased. Moreover, the total number of hydrogen bonds decreased, and the interaction energy in the formaldehyde-cellulose model was reduced, which confirmed this conclusion and indicated that temperature increase could enhance the diffusion of formaldehyde in cellulose. The mechanical parameters of cellulose were analyzed in terms of Young’s modulus, shear modulus, bulk modulus, Poisson’s ratio, and the ratio of bulk modulus to shear modulus (K/G), which were affected by the temperature. The elastic modulus (E, G, and K) of cellulose decreased as the temperature increased, while the Poisson’s ratio V and K/G values increased. The results of the research explain how elevated temperature can promote the release of formaldehyde in furniture from a microscopic perspective, which supports each other with the results of previous experimental data and practical applications in production.

Elasto-Plastic Hemispherical Contact Models for Various Mechanical Properties

2005 ◽  
Author(s):  
John J. Quicksall ◽  
Robert L. Jackson ◽  
Itzhak Green
Keyword(s):  
Mechanical Properties ◽  
Elastic Modulus ◽  
Material Properties ◽  
Poisson’S Ratio ◽  
Carbon Steels ◽  
Poisson's Ratio ◽  
Aluminum Bronze ◽  
Contact Models ◽  
Element Technique ◽  
Malleable Cast

This work uses the finite element technique to model the elasto-plastic deformation of a hemisphere contacting a rigid flat for various material properties typical of aluminum, bronze, copper, titanium and malleable cast iron. Additionally, this work conducted parametric FEM tests on a generic material in which the elastic modulus and Poisson’s ratio are varied independently while the yield strength is held constant. A larger spectrum of material properties are covered in this work than in most previous works. The results are compared to two previously formulated elasto-plastic models simulating the deformation of a hemisphere in contact with a rigid flat. Both of the previously formulated models use carbon steel mechanical properties to arrive at empirical formulations implied to pertain to various materials. While both models considered several carbon steels with varying yield strengths, they did not test materials with varying Poisson’s ratio or elastic modulus. The previously generated elasto-plastic models give fairly good predictions when compared to the FEM results for various material properties from the current work, except that one model produces more accurate predictions overall, especially at large deformations where other models neglect important trends due to decreases in “hardness” with increasing deformation.

Sign in / Sign up

Export Citation Format

Share Document