Magnetic Properties of Bulk Metallic Glasses

2007 ◽  
Vol 9 (6) ◽  
pp. 468-474 ◽  
Author(s):  
P. Tiberto ◽  
M. Baricco ◽  
E. Olivetti ◽  
R. Piccin
Keyword(s):  
Magnetic Properties ◽  
Metallic Glasses ◽  
Bulk Metallic Glasses

Bulk Metallic Glasses

2008 ◽  
Vol 604-605 ◽  
pp. 229-238
Author(s):  
Marcello Baricco ◽  
Tanya A. Başer ◽  
Gianluca Fiore ◽  
Rafael Piccin ◽  
Marta Satta ◽  
...  
Keyword(s):  
Magnetic Properties ◽  
Metallic Glasses ◽  
Amorphous Alloys ◽  
Shear Bands ◽  
Bulk Metallic Glasses ◽  
Rapid Quenching ◽  
Second Phase ◽  
Research Activity ◽  
Long Time ◽  
Geometrical Constraints

Rapid quenching techniques have been successfully applied since long time for the preparation of metallic glasses in ribbon form. Only in the recent years, the research activity addressed towards the synthesis of bulk metallic glasses (BMG), in form of ingots with a few millimetres in thickness. These materials can be obtained by casting techniques only for selected alloy compositions, characterised by a particularly high glass-forming tendency. Bulk amorphous alloys are characterised by a low modulus of elasticity and high yielding stress. The usual idea is that amorphous alloys undergo work softening and that deformation is concentrated in shear bands, which might be subjected to geometrical constraints, resulting in a substantial increase in hardness and wear resistance. The mechanical properties can be further improved by crystallisation. In fact, shear bands movement can be contrasted by incorporating a second phase in the material, which may be produced directly by controlled crystallisation. Soft magnetic properties have been obtained in Fe-based systems and they are strongly related to small variations in the microstructure, ranging from a fully amorphous phase to nanocrystalline phases with different crystal size. The high thermal stability of bulk metallic glasses makes possible the compression and shaping processes in the temperature range between glass transition and crystallisation. Aim of this paper is to present recent results on glass formation and properties of bulk metallic glasses with various compositions. Examples will be reported on Zr, Fe, Mg and Pd-based materials, focussing on mechanical and magnetic properties.

Magnetic Properties and Glass Forming Ability of Fe-B-Y-Nb-Zr Bulk Metallic Glasses

2012 ◽  
Vol 577 ◽  
pp. 27-30 ◽  
Author(s):  
San Xin Wang ◽  
Ze Yu Wu
Keyword(s):  
Thermal Stability ◽  
Magnetic Properties ◽  
Metallic Glasses ◽  
Bulk Metallic Glasses ◽  
Supercooled Liquid Region ◽  
Glass Forming Ability ◽  
Maximum Diameter ◽  
Liquid Region ◽  
Casting Technique ◽  
Glass Forming

Bulk metallic glasses (BMGs) alloys (Fe71.2B24Y4.8)96Nb4-xZrx (x = 1-4 at.%) with a maximum diameter of 5 mm were synthesized with low purity materials by copper mold casting technique. The effect of Zr substitution for Nb on the structure, thermal stability and the magnetic properties has been studied. It was found that the substitution of an appropriate amount of Zr for Nb can improve the glass forming ability. The wide supercooled liquid region ∆Tx (exceeding 123 K) and a high Tg (exceeding 868 K) demonstrated a high thermal stability of the present Fe-based BMGs. In addition, these BMGs also exhibit good soft magnetic properties with relatively high saturation magnetization of 88 emu/g, and low coercivity of 20 Oe.

Effects of Cu additions on mechanical and soft-magnetic properties of CoFeBSiNb bulk metallic glasses

2018 ◽  
Vol 737 ◽  
pp. 815-820 ◽  
Author(s):  
Genlei Zhang ◽  
Qianqian Wang ◽  
Chenchen Yuan ◽  
Weiming Yang ◽  
Jing Zhou ◽  
...  
Keyword(s):  
Magnetic Properties ◽  
Metallic Glasses ◽  
Bulk Metallic Glasses ◽  
Soft Magnetic Properties ◽  
Soft Magnetic

Effect of annealing on the magnetic properties of Nd70Fe20Al10 bulk metallic glasses

2005 ◽  
Vol 290-291 ◽  
pp. 1214-1216 ◽  
Author(s):  
Elena Olivetti ◽  
Marcello Baricco ◽  
Enzo Ferrara ◽  
Paola Tiberto ◽  
Luca Martino
Keyword(s):  
Magnetic Properties ◽  
Metallic Glasses ◽  
Bulk Metallic Glasses

Effect of B2O3 Fluxing on Glass-Forming Ability and Soft Magnetic Properties of Fe(-Co)-B-Si-Nb Bulk Metallic Glasses

2014 ◽  
Vol 783-786 ◽  
pp. 1895-1900 ◽  
Author(s):  
Teruo Bitoh
Keyword(s):  
Magnetic Properties ◽  
Metallic Glasses ◽  
Bulk Metallic Glasses ◽  
Glass Forming Ability ◽  
The Other ◽  
Maximum Diameter ◽  
Soft Magnetic Properties ◽  
Copper Mold ◽  
Soft Magnetic ◽  
Glass Forming

The effect of B2O3 fluxing on the glass-forming ability (GFA), the structure and the soft magnetic properties of Fe (-Co)-B-Si-Nb bulk metallic glasses (BMGs) has been investigated. The large Fe-Co-B-Si-Nb BMG specimens with diameters up to 7.7 mm, which is approximately 1.5 times as large as that of the maximum diameter of the copper mold cast one (= 5 mm), were prepared by the fluxing and water quenching. Thus the GFA of the Fe-Co-B-Si-Nb BMG are improved by the fluxing. It was confirmed that the soft magnetic properties of the Fe-Co-B-Si-Nb BMG are also improved by the fluxing. On the other hand, it was found for the Co-free Fe-B-Si-Nb BMG that the B2O3 fluxing promotes the precipitation of the α-Fe (-Si) and Fe2B phases in the central region of the specimens; i.e., the GFA of the Fe-B-Si-Nb BMG is decreased by the fluxing. The Fe-B-Si-Nb BMG specimens show a flat hysteresis loop, indicating a good linear relationship between the magnetic induction and the applied magnetic field. These results of the Fe-B-Si-Nb BMG show that it is possible to develop a new soft magnetic material that exhibits constant permeability, which is necessary for producing inductors and choke coils.

Sign in / Sign up

Export Citation Format

Share Document