scholarly journals Three-dimensional tidal flow in a fjord-like basin with converging width: An analytical model

2017 ◽  
Vol 122 (9) ◽  
pp. 7558-7576 ◽  
Author(s):  
Lauren Ross ◽  
Huib de Swart ◽  
Erik Ensing ◽  
Arnoldo Valle-Levinson
Keyword(s):  
Analytical Model ◽  
Tidal Flow ◽  
Three Dimensional

A Real-Time Mathematical Model for Three-Dimensional Tidal Flow and Water Quality

1991 ◽  
Vol 24 (6) ◽  
pp. 171-177 ◽  
Author(s):  
Zeng Fantang ◽  
Xu Zhencheng ◽  
Chen Xiancheng
Keyword(s):  
Mathematical Model ◽  
Water Quality ◽  
Real Time ◽  
Control Volume ◽  
Tidal Flow ◽  
Three Dimensional ◽  
River Estuary ◽  
Pearl River Estuary ◽  
Practical Application ◽  
The Pearl River

A real-time mathematical model for three-dimensional tidal flow and water quality is presented in this paper. A control-volume-based difference method and a “power interpolation distribution” advocated by Patankar (1984) have been employed, and a concept of “separating the top-layer water” has been developed to solve the movable boundary problem. The model is unconditionally stable and convergent. Practical application of the model is illustrated by an example for the Pearl River Estuary.

Time-varying mesh stiffness calculation for gear pairs with misalignment errors in multiple degrees of freedom based on an analytical method

2021 ◽  
pp. 095440622110392
Author(s):  
Qi Wen ◽  
Qi Chen ◽  
Qungui Du ◽  
Yong Yang
Keyword(s):  
Analytical Model ◽  
Contact Line ◽  
Degrees Of Freedom ◽  
Three Dimensional ◽  
Single Pair ◽  
Time Varying ◽  
Mesh Stiffness ◽  
Position Change ◽  
Multiple Degrees Of Freedom ◽  
Effective Contact

Misalignment errors (MEs) in multiple degrees of freedom (multi-DOFs) at the mesh position will lead to a change in the time-varying mesh stiffness (TVMS) and then affect the dynamic behaviour of gear pairs. Therefore, a new, more rapid, three-dimensional analytical model for TVMS calculation for gear pairs with three rotational and three translational MEs is established in this paper, and a new solution method based on potential energy theory is presented. In addition, the correctness of the new model is verified by the finite element method (FEM). Moreover, the effective contact line, uneven distribution of mesh force on the contact line, and mesh position change are taken into account. Finally, the TVMS under different ME conditions is calculated with the new analytical model. The results showed that the different MEs have dissimilar effects on the TVMS, and the relationship between the ME and TVMS is nonlinear. In addition, the region of single-pair and double-pair teeth in contact would also change with ME.

Secondary Fluorescence of 3D Heterogeneous Materials Using a Hybrid Model

2020 ◽  
Vol 26 (3) ◽  
pp. 484-496
Author(s):  
Yu Yuan ◽  
Hendrix Demers ◽  
Xianglong Wang ◽  
Raynald Gauvin
Keyword(s):  
Monte Carlo Simulation ◽  
Monte Carlo ◽  
Analytical Model ◽  
Hybrid Model ◽  
Three Dimensional ◽  
Heterogeneous Materials ◽  
X Ray ◽  
The Monte Carlo Method ◽  
Secondary Fluorescence ◽  
Good Agreement

AbstractIn electron probe microanalysis or scanning electron microscopy, the Monte Carlo method is widely used for modeling electron transport within specimens and calculating X-ray spectra. For an accurate simulation, the calculation of secondary fluorescence (SF) is necessary, especially for samples with complex geometries. In this study, we developed a program, using a hybrid model that combines the Monte Carlo simulation with an analytical model, to perform SF correction for three-dimensional (3D) heterogeneous materials. The Monte Carlo simulation is performed using MC X-ray, a Monte Carlo program, to obtain the 3D primary X-ray distribution, which becomes the input of the analytical model. The voxel-based calculation of MC X-ray enables the model to be applicable to arbitrary samples. We demonstrate the derivation of the analytical model in detail and present the 3D X-ray distributions for both primary and secondary fluorescence to illustrate the capability of our program. Examples for non-diffusion couples and spherical inclusions inside matrices are shown. The results of our program are compared with experimental data from references and with results from other Monte Carlo codes. They are found to be in good agreement.

scholarly journals Simulation Informed CAD for 3D Nanoprinting

Micromachines ◽  
2019 ◽  
Vol 11 (1) ◽  
pp. 8 ◽  
Author(s):  
Jason D. Fowlkes ◽  
Robert Winkler ◽  
Eva Mutunga ◽  
Philip D. Rack ◽  
Harald Plank
Keyword(s):  
Analytical Model ◽  
Computer Aided Design ◽  
Critical Mass ◽  
Three Dimensional ◽  
Three Dimensional Objects ◽  
Non Linear ◽  
Out Of Plane ◽  
Digital Scanning ◽  
Definition Of ◽  
Bending Nanowires

A promising 3D nanoprinting method, used to deposit nanoscale mesh style objects, is prone to non-linear distortions which limits the complexity and variety of deposit geometries. The method, focused electron beam-induced deposition (FEBID), uses a nanoscale electron probe for continuous dissociation of surface adsorbed precursor molecules which drives highly localized deposition. Three dimensional objects are deposited using a 2D digital scanning pattern—the digital beam speed controls deposition into the third, or out-of-plane dimension. Multiple computer-aided design (CAD) programs exist for FEBID mesh object definition but rely on the definition of nodes and interconnecting linear nanowires. Thus, a method is needed to prevent non-linear/bending nanowires for accurate geometric synthesis. An analytical model is derived based on simulation results, calibrated using real experiments, to ensure linear nanowire deposition to compensate for implicit beam heating that takes place during FEBID. The model subsequently compensates and informs the exposure file containing the pixel-by-pixel scanning instructions, ensuring nanowire linearity by appropriately adjusting the patterning beam speeds. The derivation of the model is presented, based on a critical mass balance revealed by simulations and the strategy used to integrate the physics-based analytical model into an existing 3D nanoprinting CAD program is overviewed.

Sign in / Sign up

Export Citation Format

Share Document