scholarly journals Remediation of Heavy Metal Ions of Cadmium, Lead And Mercury From Its Salts Solution, By Precipitating Out Using Biological Fluid Indian Buffalo’s (Bubalusarnee) Milk Subsequent Analysis of Filtrate By Icp-Aes And X Ray Fluorescence of White Flocculent Precipitate Containing Milk Protein and of Filtrate Solution.

2013 ◽  
Vol 4 (4) ◽  
pp. 99-103
Author(s):  
Debasish Mitra Debasish Mitra
Keyword(s):  
Heavy Metal ◽  
Metal Ions ◽  
Heavy Metal Ions ◽  
Milk Protein ◽  
Biological Fluid ◽  
X Ray ◽  
Cadmium Lead

Solvent extraction-microdroplet x-ray fluorescence analyses of trace amounts of heavy metal ions

1984 ◽  
Vol 13 (2) ◽  
pp. 83-86 ◽  
Author(s):  
Michihiro Murata ◽  
Masayuki Omatsu ◽  
Syuji Mushimoto
Keyword(s):  
Heavy Metal ◽  
Solvent Extraction ◽  
Metal Ions ◽  
Heavy Metal Ions ◽  
X Ray

scholarly journals Absorbed Pb2+ and Cd2+ Ions in Water by Cross-Linked Starch Xanthate

2017 ◽  
Vol 2017 ◽  
pp. 1-9 ◽  
Author(s):  
Kai Feng ◽  
Guohua Wen
Keyword(s):  
Heavy Metal ◽  
Metal Ions ◽  
Heavy Metal Ions ◽  
Adsorption Mechanism ◽  
Potato Starch ◽  
Sodium Acrylate ◽  
X Ray Diffraction ◽  
X Ray ◽  
Concentration Of Ions ◽  
Cross Linker

A cross-linked starch xanthate was prepared by graft copolymerization of acrylamide and sodium acrylate onto starch xanthate using potassium persulfate and sodium hydrogen sulfite initiating system and N,N′-methylenebisacrylamide as a cross-linker. As this kind of cross-linked potato starch xanthate can effectively absorb heavy metal ions, it was dispersed in aqueous solutions of divalent heavy metal ions (Pb2+ and Cd2+) to investigate their absorbency by the polymer. Factors that can influence absorbency were investigated, such as the ratio of matrix to monomers, the amount of initiator and cross-linker, pH, and the concentration of metal ions. Results were reached and conclusion was drawn that the best synthetic conditions for the polymer adsorbing Pb2+ and Cd2+ were as follows: the quality ratio of matrix to monomers was 1 : 12 and 1 : 11, the amount of initiator was 2.4% and 3.2% of matrix, and the amount of cross-linker was 12 mg and 13 mg. When the initial concentration of ions was 10 mg/L, the highest quantities of adsorption of Pb2+ and Cd2+ were 47.11 mg/g and 36.55 mg/g. Adsorption mechanism was discussed by using Fourier transform infrared (FTIR) spectroscopy, X-ray diffraction (XRD), scanning electron microscope (SEM), Energy Dispersive X-Ray Spectroscopy (EDS) test, and adsorption kinetic simulation.

scholarly journals Fabrication ofγ-Fe2O3Nanoparticles by Solid-State Thermolysis of a Metal-Organic Framework, MIL-100(Fe), for Heavy Metal Ions Removal

2014 ◽  
Vol 2014 ◽  
pp. 1-6 ◽  
Author(s):  
Shengtao Hei ◽  
Yan Jin ◽  
Fumin Zhang
Keyword(s):  
Heavy Metal ◽  
Water Treatment ◽  
Solid State ◽  
Metal Ions ◽  
Photoelectron Spectroscopy ◽  
Heavy Metal Ions ◽  
X Ray ◽  
Metal Organic ◽  
Heavy Metal Ions Removal ◽  
Metal Ions Removal

Porousγ-Fe2O3nanoparticles were prepared via a solid-state conversion process of a mesoporous iron(III) carboxylate crystal, MIL-100(Fe). First, the MIL-100(Fe) crystal that served as the template of the metal oxide was synthesized by a low-temperature (<100°C) synthesis route. Subsequently, the porousγ-Fe2O3nanoparticles were fabricated by facile thermolysis of the MIL-100(Fe) powders via a two-step calcination treatment. The obtainedγ-Fe2O3was characterized by X-ray diffraction (XRD), N2adsorption, X-ray photoelectron spectroscopy (XPS), and scanning electron microscopy (SEM) techniques, and then used as an adsorbent for heavy metal ions removal in water treatment. This study illustrates that the metal-organic frameworks may be suitable precursors for the fabrication of metal oxides nanomaterials with large specific surface area, and the prepared porousγ-Fe2O3exhibits a superior adsorption performance for As(V) and As(III) ions removal in water treatment.

scholarly journals Synthesis and Characterization of Activated Carbon/ZnO Nanocomposite from Water Hyacinth for Heavy Metals Adsorption and its Antimicrobial Activity

2021 ◽  
Vol 33 (3) ◽  
pp. 551-556
Author(s):  
Shivakumar Lakshmipurada ◽  
Kankara Ramakrishna Reddy ◽  
Sureshkumar Sundaravel
Keyword(s):  
Heavy Metal ◽  
Antimicrobial Activity ◽  
Activated Carbon ◽  
Metal Ions ◽  
Zno Nanoparticles ◽  
Water Hyacinth ◽  
Heavy Metal Ions ◽  
Electrostatic Interactions ◽  
Cadmium Lead ◽  
Heavy Metal Ions Removal

In present work, the activated carbon was prepared from water hyacinth (Eichhornia crassipes) and ZnO nanoparticles synthesized by chemical process. Nanocomposites were formed using activated carbon and ZnO nanoparticles to get improved electrostatic interactions for the successful adsorption of heavy metal ions such as nickel, cadmium, lead and chromium from aqueous solution. The prepared nanocomposites were further characterized using XRD, SEM and EDAX techniques. The heavy metal ions removal efficacy was evaluated through ICP-OES. The result showed that the prepared nanocomposite efficiently adsorbed 76.75-92.40% nickel, 75.80-92.25% cadmium, 86.25-96.30% lead and 76.37-95.26% chromium. Nanocomposites showed a significant antimicrobial activity against Streptococci and B. subtilis.

Removal of lead(II) and copper(II) from aqueous solution using foitite from Linshou mine in Hebei, China

2011 ◽  
Vol 64 (8) ◽  
pp. 1620-1628 ◽  
Author(s):  
Dengliang He ◽  
Guangfu Yin ◽  
Faqin Dong ◽  
Laibao Liu ◽  
Xiaoli Tan ◽  
...  
Keyword(s):  
Aqueous Solution ◽  
Heavy Metal ◽  
Metal Ions ◽  
Heavy Metal Ions ◽  
Metal Uptake ◽  
Energy Dispersive Spectrometer ◽  
Hebei Province ◽  
X Ray Diffraction ◽  
X Ray ◽  
Laser Raman

Foitite from Linshou mine in China's Hebei province was investigated as an adsorbent to remove Pb(II) and Cu(II) from aqueous solution. The results showed that foitite can readily remove heavy metal ions from aqueous solution. The data shows that the metal uptake for Pb(II) increases rapidly, accounting for 74.47% when contact time was 2 min. In contrast to Pb(II), there was a worse capability for adsorption of Cu(II). In the first 4 min, the metal uptake accounted for 34.7%. According to the analytical results obtained from X-ray diffraction, laser Raman spectrum, X-ray energy dispersive spectrometer, and Zeta potential, the removal mechanism of Pb(II) and Cu(II) by using foitite can be explained as following: firstly, the existence of an electrostatic field around foitite particles can attract heavy metal ions and consequently combine heavy metal ions with OH−; secondly, heavy metal ions in the solution are exchanged with the Fe3+ and Al3+ in the foitite.

scholarly journals Testing of Natural Sorbents for the Assessment of Heavy Metal Ions’ Adsorption

2021 ◽  
Vol 11 (8) ◽  
pp. 3723
Author(s):  
Vera Yurak ◽  
Raphael Apakashev ◽  
Alexey Dushin ◽  
Albert Usmanov ◽  
Maxim Lebzin ◽  
...  
Keyword(s):  
Heavy Metal ◽  
Metal Ions ◽  
Heavy Metal Ions ◽  
Large Fraction ◽  
Experimental Tests ◽  
Absorption Spectrometry ◽  
Natural Sorbents ◽  
X Ray ◽  
Oriented Approach ◽  
Economic Criteria

Nowadays, the sorption-oriented approach is on the agenda in the remediation practices of lands contaminated with heavy metals. The current growing quantity of research accounts for different sorbets. However, there is still a lack of studies utilizing the economic criteria. Therefore, to ensure a wide application of opportunities, one of the necessary requirements is their economic efficiency in use. By utilizing these criteria, this manuscript researches the generally accepted natural sorbents for the assessment of heavy metal ions’ adsorption, such as peat, diatomite, vermiculite and their mixtures in different proportions and physical shapes. The methodological base of the study consists of the volumetric (titrimetric) method, X-ray fluorescence spectrometry and atomic absorption spectrometry. Experimental tests show a certain decline in the efficiency of heavy metal ions’ adsorption from aqueous salt solutes as follows: granular peat–diatomite > large-fraction vermiculite > medium-fraction vermiculite > non-granular peat–diatomite > diatomite.

scholarly journals Novel Diazocrowns with Pyrrole Residue as Lead(II)Colorimetric Probes

Materials ◽  
2021 ◽  
Vol 14 (23) ◽  
pp. 7239
Author(s):  
Błażej Galiński ◽  
Elżbieta Luboch ◽  
Jarosław Chojnacki ◽  
Ewa Wagner-Wysiecka
Keyword(s):  
Heavy Metal ◽  
Detection Limit ◽  
Metal Ions ◽  
Heavy Metal Ions ◽  
Spectral Response ◽  
Hydrocarbon Chain ◽  
High Dilution ◽  
Aromatic Diamines ◽  
Aqueous Acetonitrile ◽  
X Ray

Novel 18- and 23-membered diazomacrocycles were obtained with satisfactory yields by diazocoupling of aromatic diamines with pyrrole in reactions carried under high dilution conditions. X-ray structure of macrocycle bearing five carbon atoms linkage was determined and described. Compounds were characterized as chromogenic heavy metal ions receptors. Selective color and spectral response for lead(II) was found in acetonitrile and its mixture with water. Complexation properties of newly obtained macrocycles with a hydrocarbon chain were compared with the properties of their oligoether analogs. The influence of the introduction of hydrocarbon residue as a part of macrocycle on the lead(II) binding was discussed. Selective and sensitive colorimetric probe for lead(II) in aqueous acetonitrile with detection limit 56.1 mg/L was proposed.

Sign in / Sign up

Export Citation Format

Share Document