scholarly journals An In Vitro Evaluation of Flexural Strength of Two Provisional Restorative Materials Light Polymerised Resin And Autopolymerised Resin.

2013 ◽  
Vol 6 (5) ◽  
pp. 5-10
Author(s):  
Surya Prakash Sharma Surya Prakash Sharma
Keyword(s):  
Flexural Strength ◽  
In Vitro Evaluation ◽  
Restorative Materials

Comparative in vitro evaluation of two provisional restorative materials

2001 ◽  
Vol 85 (2) ◽  
pp. 129-132 ◽  
Author(s):  
Henry M. Young ◽  
Charles T. Smith ◽  
Dean Morton
Keyword(s):  
In Vitro Evaluation ◽  
Restorative Materials

scholarly journals Effect of Bleaching with 15% Carbamide Peroxide on Flexural Strength of Three Resin-Based Restorative Materials

2020 ◽  
Author(s):  
Soodabeh Kimyai ◽  
Yasaman Ghavami Lahij ◽  
Mehdi Daneshpooy ◽  
Elmira Jafari Navimipour ◽  
Parnian Alizadeh Oskoee
Keyword(s):  
Flexural Strength ◽  
Hybrid Composite ◽  
Composite Resin ◽  
Restorative Material ◽  
Carbamide Peroxide ◽  
Bleaching Procedure ◽  
Different Types ◽  
Restorative Materials ◽  
The Mean

Objectives: Considering the increasing use of vital bleaching procedures and the increased application of newly introduced resin-based materials for tooth restoration, this study was designed to evaluate the effect of 15% carbamide peroxide gel on the flexural strength of three resin-based restorative materials. Materials and Methods: Three different types of restorative materials namely Beautifil II giomer, Cention N, and Z250 micro-hybrid composite resin were evaluated in this in vitro, experimental study. Twenty-four bar-shaped specimens were prepared from each restorative material, totaling 72 specimens, and were randomly assigned to two subgroups with and without bleaching procedure (n=12). In the bleaching subgroups, 15% carbamide peroxide gel was applied on the specimen surface 8 h a day for 14 days. The flexural strength of the specimens was then measured. Two-way ANOVA was used to compare the flexural strength of the specimens. Results: There was a significant reduction in the flexural strength of materials following exposure to the bleaching agent (P<0.05). The flexural strength was significantly higher in the groups that did not undergo bleaching. However, the mean flexural strength of the restorative materials was not significantly different (P=0.12). Conclusion: The flexural strength of Beautifil II giomer, Cention N, and Z250 micro-hybrid composite resin could be compromised subsequent to bleaching with 15% carbamide peroxide gel. The three resin-based restorative materials exhibited similar flexural strength values irrespective of the use or no use of 15% carbamide peroxide gel.

scholarly journals Bulk-Fill Direct Restorative Materials: An In Vitro Assessment of Their Physio-Mechanical Properties

Oral ◽  
2021 ◽  
Vol 1 (2) ◽  
pp. 75-87
Author(s):  
Hui Woon Yeo ◽  
May Yeh Loo ◽  
Mariam Alkhabaz ◽  
Kai Chun Li ◽  
Joanne Jung Eun Choi ◽  
...  
Keyword(s):  
Flexural Strength ◽  
Wear Testing ◽  
Restorative Materials ◽  
Different Depths ◽  
Bonferroni Test ◽  
In Vitro Assessment ◽  
High Level ◽  
Post Hoc ◽  
One Way Anova

Bulk-fill restorative material has gained popularity in clinical practice, due to their perceived timesaving aspect. Objective was to compare the properties of bulk-fill direct restorative materials. Filtek Z350 (CR), Filtek One Bulk Fill Restorative (BF), Fuji IX and EQUIA Forte (EF) were compared. Thirty specimens from each material were prepared according to ISO 4049 for three-point flexural strength. Elastic moduli and hardness (n = 20) were evaluated using nanoindentation. Depth of cure (DC) (n = 20) was measured for BF at three different depths (2, 3, 4 mm) and at two irradiation times (20 and 40 s). Wear testing was carried out for three different periods (3, 6, 12 month(s)). All specimens were stored in 37 °C water for 24 h prior to testing. Results were evaluated using one-way ANOVA followed by a post hoc Bonferroni test (p < 0.05). BF and CR showed a significantly higher flexural strength than other groups (p < 0.05), and the highest Weibull modulus was found in CR. BF showed sufficient DC with at least 85%, at all thicknesses. CR and BF also had a high level of translucency than EF and Fuji IX. Significant differences in flexural strength were found among all materials except between Fuji IX and EF. While all material tested are suitable for use clinically, BF and CR have superior properties than GIC based bulk-fill.

scholarly journals In vitro evaluation of flexural strength of different brands of expansion screws

2012 ◽  
Vol 17 (3) ◽  
pp. 103-107
Author(s):  
Kádna Fernanda Mendes de Oliveira ◽  
Mário Vedovello Filho ◽  
Mayury Kuramae ◽  
Adriana Simoni Lucato ◽  
Heloisa Cristina Valdhigi
Keyword(s):  
Flexural Strength ◽  
In Vitro Evaluation
Sign in / Sign up

Export Citation Format

Share Document