scholarly journals SAND WAVE EVOLUTION MODEL FOR EFFICIENT CHANNEL DEPTH MANAGEMENT

Author(s):  
Nobuyuki Ono ◽  
Satoshi Nakamura

Sand wave is a consecutive wavy bedform on seabed with several meters in wave height and several tens-hundreds of meters in wave length. If the crests of sand waves rise above the required channel depth, they often prevent vessels from safe navigation. In this study, a prediction model of sand wave evolution is applied to predict depth change at the crest of sand waves in Kanmon route, Japan. Kanmon route is a long, narrow and winding channel where strong tidal currents take place due to large tidal difference between Japan sea and Seto-island sea. In these area, a lot of bathymetric survey data have been collected to monitor the water depth. Also, channel deepening project up to -14 m is underway, and therefore reliable prediction model of sand wave evolution is needed for channel depth management in the future.

Author(s):  
Koji MATSUNAGA ◽  
Keiji MIYAZAKI ◽  
Atsuo OMURA ◽  
Nobuyuki ONO

Author(s):  
Wim van der Molen ◽  
Holly Watson ◽  
David Taylor

The declared depth in port access channels is often maintained by dredging and monitored by regular bathymetric surveys. However, at remote sites these activities are not cost-effective and the channel depth would need to be defined based on the surveyed depth plus an allowance for sedimentation and variability in bed levels. This allowance can especially be significant in estuaries with strong tidal currents, where mega bedforms, including sand waves, develop on the seabed due to the prevailing strong current flows. The mega sand waves are highly mobile and fluctuate in height as they migrate over the seabed. Mega sand waves and mega ripples with a height up to approx. 3.2 m were observed in multi-beam bathymetric survey undertaken in the offshore entrance to the Geba River estuary in Guinea Bissau. Supramax bulk carriers with a draft of 11-12 m are planned to transit this area on departure from a proposed phosphate export terminal located further upstream in the estuary.Recorded Presentation from the vICCE (YouTube Link): https://youtu.be/5Gmy9yQkfno


Water ◽  
2019 ◽  
Vol 11 (3) ◽  
pp. 612 ◽  
Author(s):  
Zhenlu Wang ◽  
Bingchen Liang ◽  
Guoxiang Wu

A series of physical experiments was conducted to study the geometry characteristics and evolution of sand waves under waves and currents. Large scale bedforms denoted as sand waves and small bedforms represented by ripples were both formed under the experimental hydrodynamic conditions. Combining the experimental data with those from previous research, the characteristics of waves and currents and measured sand waves were listed. Small amplitude wave theory and Cnoidal wave theory were used to calculate the wave characteristics depending on different Ursell numbers, respectively. The results show good agreement between the dimensionless characteristics of sand waves and the dimensionless wave characteristics with a smaller wave steepness. When the wave steepness is large, the results seem rather scattered which may be affected by the wave nonlinearity. Sand wave steepness hardly changed with bed shear stress. A simple linear relationship can be found between sand wave length and wave steepness. It is easy to evaluate the sand wave characteristics from the measured wave data.


Author(s):  
Ken P. Games ◽  
David I. Gordon

ABSTRACTSand waves are well known indicators of a mobile seabed. What do we expect of these features in terms of migration rates and seabed scour? We discuss these effects on seabed structures, both for the Oil and Gas and the Windfarm Industries, and consider how these impact on turbines and buried cables. Two case studies are presented. The first concerns a windfarm with a five-year gap between the planning survey and a subsequent cable route and environmental assessment survey. This revealed large-scale movements of sand waves, with the displacement of an isolated feature of 155 m in five years. Secondly, another windfarm development involved a re-survey, again over a five-year period, but after the turbines had been installed. This showed movements of sand waves of ∼50 m in five years. Observations of the scour effects on the turbines are discussed. Both sites revealed the presence of barchans. Whilst these have been extensively studied on land, there are few examples of how they behave in the marine environment. The two case studies presented show that mass transport is potentially much greater than expected and that this has implications for choosing turbine locations, the effect of scour, and the impact these sediment movements are likely to have on power cables.


2014 ◽  
Vol 39 ◽  
pp. 81-87
Author(s):  
T. Kakinuma ◽  
T. Inoue ◽  
R. Akahori ◽  
A. Takeda

Abstract. The authors made erodible bed experiments under steady flow condition at the Chiyoda Experimental Flume, a large-scale facility constructed on the floodplain of the Tokachi River, and observed sand waves on the bed of the flume. In this study, the characteristics of the sand waves are examined along the longitudinal survey lines and confirmed to be dunes. Next, the authors estimated Manning's roughness coefficients from the observed hydraulic values and assumed that the rise of the coefficients attributed to the sand wave development. Finally, vertical flow distribution on the sand waves are examined, and observed velocity distribution on the crest of waves found to be explained by the logarithmic distribution theory.


Water ◽  
2020 ◽  
Vol 12 (10) ◽  
pp. 2861
Author(s):  
Ariel Gorenstein ◽  
Meir Kalech ◽  
Daniela Fuchs Hanusch ◽  
Sharon Hassid

Every network of supply waterlines experiences thousands of yearly bursts, breaks, leakages, and other failures. These failures waste a great amount of resources, as not only the waterlines need to be repaired, but also water is wasted and the distribution service is interrupted. For that reason, many water facilities employ proactive maintenance strategies in their networks, where they replace likely-to-fail pipes in advance to prevent the failures. In this paper, we aim to establish a reliable prediction model that can accurately predict faults in waterlines prior to their occurrence. We propose a specific segmentation method for long transmission mains, as well as three data-driven models and one rule-based prediction model. We evaluate a real world waterline network used in Israel, operated by Mekorot company, using three common metrics. The results show that the data-driven algorithms outperform the rule-based model by at least 5% in each of the metrics. Additionally, their prediction becomes more accurate as they are trained with more data, but enhancing these data with geographically related features does not improve the accuracy further.


2020 ◽  
Author(s):  
Yin-Hsuan Liao ◽  
Ho-Han Hsu ◽  
Jyun-Nai Wu ◽  
Tzu-Ting Chen ◽  
Eason Yi-Cheng Yang ◽  
...  

<p>        Submarine sand waves are known to be induced by tidal currents and their migration has become an important issue since it may affect seafloor installations. In Taiwan Strait, widely spreading sand waves have been recognized on the Changyun Ridge, a tide-dominated giant sand ridge offshore western Taiwan. However, due to lacking of high-resolution and repeated geophysical surveys before, detailed characteristics and migrating features of the sand waves in Taiwan Strait were poorly understood. As new multibeam bathymetric and seismic data were collected repeatedly during 2016 - 2018 for offshore wind farm projects, we can now advance the understanding of sand wave characteristics and migration patterns in the study area. We apply a geostatistical analysis method on bathymetry data to reveal distribution and spatial characteristics of the sand waves, and estimate its migration pattern by using an updated spatial cross-correlation method. Then, sedimentary features, internal structures and thicknesses of sand waves are observed and estimated on high-resolution seismic profiles. Our results show that the study area is mostly superimposed by multi-scaled sandy rhythmic bed forms. However, the geomorphological and migrating characteristics of the sand waves are complicated. Their wavelengths range from 80 to 200 m, heights range from 1.5 to 8 m, and crests are generally oriented in the WNW-ESE direction. Obvious sand wave migration was detected from repeated high-resolution multi-beam data between 2016 and 2018, and migration distances can be up to ~150 m in 15 months. The average elevation change of the seafloor over the whole survey area is ~3.0 m, with a maximum value of 6.9 m. Moreover, the sand waves can migrate over 30 m with ~2.5 m elevation change in 2 months and migrate over 5 m with ~1 m elevation change in 15 days. The results also show that the orientation of wave movement can be reversed even within a small distance. By identifying the base of sand wave on seismic profiles, the thicknesses of sand waves are found ranging from 1 to 10 meters. The base of wave structure become slightly deeper from nearshore to offshore. Our results indicate that the thickness of sand waves increases with degree of asymmetry and migration rate. By bathymetric and reflection seismic data analyses, systematic spatial information of sand waves in the study area are established, and we suggest that not only tidal currents can affect sand wave migration patterns, but also wave structures and thicknesses play important roles in sand wave migrating processes and related geomorphological changes.</p>


1980 ◽  
Vol 117 (5) ◽  
pp. 437-446 ◽  
Author(s):  
J. R. L. Allen

SummarySand waves are such comparatively immobile transverse bedforms because they occur in tide-induced oscillatory bottom boundary layers typified by a steady velocity-component that generally is small compared to the amplitude of the periodic part. Consequently, the net bed-material transport rates, responsible for the long-term translation of the sand waves, typically are very small compared with the larger of the instantaneous rates. Sand waves should, therefore, be marked internally by series of erosional or, under restricted circumstances, non-depositional master bedding surfaces, each such surface, together with an associated comparatively thin sediment increment, being attributable to one sand-driving tide. Studies of modern sand waves, and investigations in the stratigraphic record, lend support to this conclusion. A further consequence of the regime of intense reworking under which sand waves exist is that their component grains should be in all ways more mature, other things being equal, than particles transported the same net distance by rivers.


1987 ◽  
Vol 24 (9) ◽  
pp. 1821-1832 ◽  
Author(s):  
D. G. F. Long ◽  
Paul Copper

Laterally discontinuous, mixed carbonate–siliciclastic sandstones in the upper Vaureal and lower Ellis Bay formations of Anticosti Island were deposited on an equatorial carbonate ramp with a slope of less than 1°. The 10–18 m thick sandstones are interpreted as subaqueous sand-wave complexes analogous to detached parts of modern shoreface-connected sand ridges. These record storm-enhanced, tidal modification of a northerly derived shoal retreat massif that may have formed in response to recovery from global sea-level lowstands in the Late Ordovician (Ashgill: late Rawtheyan – Hirnantian). The sand-wave complexes formed within a tidal embayment that was confined by the Precambrian Shield to the north and northwest by rising tectonic highlands of the Humber Zone in Newfoundland to the east, and by active tectonic highlands in the Quebec Appalachians (Gaspésie) to the south. Paleocurrent distributions, parallel to the western margins of the Strait of Belle Isle, suggest that the north end of the embayment was closed in Late Ordovician time. Low-diversity faunas within the sand units consist mostly of sowerbyellid, strophomenid, and rhynchonellid brachiopods, bivalves, gastropods, large aulacerid stromatoporoids, and large, domed favositid corals. These "sandy fades" faunas belong to communities significantly different from those found in the laterally interfingering and overlying carbonates and shales, suggesting that the sand waves played an important role in local community modification.


2014 ◽  
Vol 753 ◽  
pp. 150-216 ◽  
Author(s):  
Ali Khosronejad ◽  
Fotis Sotiropoulos

AbstractWe develop a coupled hydro-morphodynamic numerical model for carrying out large-eddy simulation of stratified, turbulent flow over a mobile sand bed. The method is based on the curvilinear immersed boundary approach of Khosronejad et al. (Adv. Water Resour., vol. 34, 2011, pp. 829–843). We apply this method to simulate sand wave initiation, growth and evolution in a mobile bed laboratory open channel, which was studied experimentally by Venditti & Church (J. Geophys. Res., vol. 110, 2005, F01009). We show that all the major characteristics of the computed sand waves, from the early cross-hatch and chevron patterns to fully grown three-dimensional bedforms, are in good agreement with the experimental data both qualitatively and quantitatively. Our simulations capture the measured temporal evolution of sand wave amplitude, wavelength and celerity with good accuracy and also yield three-dimensional topologies that are strikingly similar to what was observed in the laboratory. We show that near-bed sweeps are responsible for initiating the instability of the initially flat sand bed. Stratification effects, which arise due to increased concentration of suspended sediment in the flow, also become important at later stages of the bed evolution and need to be taken into account for accurate simulations. As bedforms grow in amplitude and wavelength, they give rise to energetic coherent structures in the form of horseshoe vortices, which transport low-momentum near-bed fluid and suspended sediment away from the bed, giving rise to characteristic ‘boil’ events at the water surface. Flow separation off the bedform crestlines is shown to trap sediment in the lee side of the crestlines, which, coupled with sediment erosion from the accelerating flow over the stoss side, provides the mechanism for continuous bedform migration and crestline rearrangement. The statistical and spectral properties of the computed sand waves are calculated and shown to be similar to what has been observed in nature and previous numerical simulations. Furthermore, and in agreement with recent experimental findings (Singh et al., Water Resour. Res., vol. 46, 2010, pp. 1–10), the spectra of the resolved velocity fluctuations above the bed exhibit a distinct spectral gap whose width increases with distance from the bed. The spectral gap delineates the spectrum of turbulence from the low-frequency range associated with very slowly evolving, albeit energetic, coherent structures induced by the migrating sand waves. Overall the numerical simulations reproduce the laboratory observations with good accuracy and elucidate the physical phenomena governing the interaction between the turbulent flow and the developing mobile bed.


Sign in / Sign up

Export Citation Format

Share Document