scholarly journals LAND COVER AND SEDIMENT LAYERS AS CONTROLS OF INLET BREACHING

2012 ◽  
Vol 1 (33) ◽  
pp. 114 ◽  
Author(s):  
Mustafa Onur Kurum ◽  
Margery Overton ◽  
Helena Mitasova

Understanding the processes that take place during a storm leading to coastal morphological change has been a challenging topic for coastal engineers. Over the years, many models have been developed to predict the coastal response to storms evolving from the one dimensional empirical models to two or three dimensional process based models. We hypothesized that the predictive capacity of these models can be improved by incorporating the site specific effect of the land cover features that are in place at the time of the storm. In this work, we present a case study of the development of the Pea Island breach, Outer Banks, North Carolina during Hurricane Irene in August 2011. The inclusion of the land cover effects into the model significantly improves the predictive capability of the model results.

2020 ◽  
Vol 12 (3) ◽  
pp. 354 ◽  
Author(s):  
Seula Park ◽  
Ahram Song

The non-spatial information of cadastral maps must be repeatedly updated to monitor recent changes in land property and to detect illegal land registrations by tax evaders. Since non-spatial information, such as land category, is usually updated by field-based surveys, it is time-consuming and only a limited area can be updated at a time. Although land categories can be updated by remote sensing techniques, the update is typically performed through manual analysis, namely through a visually interpreted comparison between the newly generated land information and the existing cadastral maps. A cost-effective, fast alternative to the current surveying methods would improve the efficiency of land management. For this purpose, the present study analyzes the discrepancy between the existing cadastral map and the actual land use. Our proposed method operates in two steps. First, an up-to-date land cover map is generated from hyperspectral unmanned aerial vehicle (UAV) images. These images are effectively classified by a hybrid two- and three-dimensional convolutional neural network. Second, a discrepancy map, which contains the ratio of the area that is being used differently from the registered land use in each parcel, is constructed through a three-stage inconsistency comparison. As a case study, the proposed method was evaluated using hyperspectral UAV images acquired at two sites of Jeonju in South Korea. The overall classification accuracies of six land classes at Sites 1 and 2 were 99.93% and 99.75% and those at Sites 1 and 2 are 39.4% and 34.4%, respectively, which had discrepancy ratios of 50% or higher. Finally, discrepancy maps between the land cover maps and existing cadastral maps were generated and visualized. The method automatically reveals the inconsistent parcels requiring updates of their land category. Although the performance of the proposed method depends on the classification results obtained from UAV imagery, the method allows a flexible modification of the matching criteria between the land categories and land coverage. Therefore, it is generalizable to various cadastral systems and the discrepancy ratios will provide practical information and significantly reduce the time and effort for land monitoring and field surveying.


Author(s):  
Geoff Rideout ◽  
Jeffrey L. Stein ◽  
Loucas S. Louca

Simplified models for predicting engine mount forces have traditionally been developed based on the assumption that for a well-balanced low-speed engine, the reciprocating dynamics can be decoupled from the three-dimensional motion of the engine block. In this paper the simplification is done systematically, using a technique previously developed by the authors to search for decoupling within a model, and to partition models in which decoupling is found. Beginning with a fully-coupled bond graph model of a balanced in-line six-cylinder engine, bonds representing negligible constraint terms are found based on aggregate power flow, and are converted to modulated sources. Separate bond graphs joined by modulating signals result. The “driving” bond graph represents the reciprocating dynamics, and the “driven” bond graph represents motion of the block on its mounts. The partitions are smaller than the original model and are simulated individually to accurately predict the dominant third-order mount forces with significant computational savings. The decoupling is found without the modeler relying on traditional assumed forms of the one-way coupled model, and can be quantitatively tracked as the system parameters and inputs change.


1996 ◽  
Vol 14 (11) ◽  
pp. 1186-1191 ◽  
Author(s):  
R. Rüster ◽  
P. Czechowsky ◽  
P. Hoffmann ◽  
W. Singer

Abstract. The ALOMAR SOUSY Radar operated at 53.5 MHz has been used in a five-beam configuration to study dynamical processes at gravity wave periods in the summer polar mesosphere. A case study of a gravity wave with a period of about 9 min is presented and analysed in some detail. The three-dimensional wave number vector is determined from the phase information of the 9-min velocity oscillations obtained in all beam directions and all range gates. The horizontal wavelengths in the north and east direction are estimated to be about 60 and 50 km, respectively. The echo power variations, simultaneously observed at different beam pointing positions, are investigated using cross-correlation analysis. The results show that these wave-associated variations lead to horizontal and vertical deformation of the echoing layers. The horizontal wavelength in the north-south direction, derived from the echo power modification, is in good agreement with the one obtained from the velocity analysis.


Author(s):  
D. L. Callahan

Modern polishing, precision machining and microindentation techniques allow the processing and mechanical characterization of ceramics at nanometric scales and within entirely plastic deformation regimes. The mechanical response of most ceramics to such highly constrained contact is not predictable from macroscopic properties and the microstructural deformation patterns have proven difficult to characterize by the application of any individual technique. In this study, TEM techniques of contrast analysis and CBED are combined with stereographic analysis to construct a three-dimensional microstructure deformation map of the surface of a perfectly plastic microindentation on macroscopically brittle aluminum nitride.The bright field image in Figure 1 shows a lg Vickers microindentation contained within a single AlN grain far from any boundaries. High densities of dislocations are evident, particularly near facet edges but are not individually resolvable. The prominent bend contours also indicate the severity of plastic deformation. Figure 2 is a selected area diffraction pattern covering the entire indentation area.


Author(s):  
K. Urban ◽  
Z. Zhang ◽  
M. Wollgarten ◽  
D. Gratias

Recently dislocations have been observed by electron microscopy in the icosahedral quasicrystalline (IQ) phase of Al65Cu20Fe15. These dislocations exhibit diffraction contrast similar to that known for dislocations in conventional crystals. The contrast becomes extinct for certain diffraction vectors g. In the following the basis of electron diffraction contrast of dislocations in the IQ phase is described. Taking account of the six-dimensional nature of the Burgers vector a “strong” and a “weak” extinction condition are found.Dislocations in quasicrystals canot be described on the basis of simple shear or insertion of a lattice plane only. In order to achieve a complete characterization of these dislocations it is advantageous to make use of the one to one correspondence of the lattice geometry in our three-dimensional space (R3) and that in the six-dimensional reference space (R6) where full periodicity is recovered . Therefore the contrast extinction condition has to be written as gpbp + gobo = 0 (1). The diffraction vector g and the Burgers vector b decompose into two vectors gp, bp and go, bo in, respectively, the physical and the orthogonal three-dimensional sub-spaces of R6.


2008 ◽  
Vol 67 (1) ◽  
pp. 51-60 ◽  
Author(s):  
Stefano Passini

The relation between authoritarianism and social dominance orientation was analyzed, with authoritarianism measured using a three-dimensional scale. The implicit multidimensional structure (authoritarian submission, conventionalism, authoritarian aggression) of Altemeyer’s (1981, 1988) conceptualization of authoritarianism is inconsistent with its one-dimensional methodological operationalization. The dimensionality of authoritarianism was investigated using confirmatory factor analysis in a sample of 713 university students. As hypothesized, the three-factor model fit the data significantly better than the one-factor model. Regression analyses revealed that only authoritarian aggression was related to social dominance orientation. That is, only intolerance of deviance was related to high social dominance, whereas submissiveness was not.


2018 ◽  
Vol 18 (1) ◽  
pp. 46-54
Author(s):  
Irmala Sukendra ◽  
Agus Mulyana ◽  
Imam Sudarmaji

Regardless to the facts that English is being taught to Indonesian students starting from early age, many Indonesian thrive in learning English. They find it quite troublesome for some to acquire the language especially to the level of communicative competence. Although Krashen (1982:10) states that “language acquirers are not usually aware of the fact that they are acquiring language, but are only aware of the fact that they are using the language for communication”, second language acquisition has several obstacles for learners to face and yet the successfulness of mastering the language never surmounts to the one of the native speakers. Learners have never been able to acquire the language as any native speakers do. Mistakes are made and inter-language is unavoidable. McNeili in Ellis (1985, p. 44) mentions that “the mentalist views of L1 acquisition hypothesizes the process of acquisition consists of hypothesis-testing, by which means the grammar of the learner’s mother tongue is related to the principles of the ‘universal grammar’.” Thus this study intends to find out whether the students go through the phase of interlanguage in their attempt to acquire second language and whether their interlanguage forms similar system as postulated by linguists (Krashen).


2018 ◽  
Vol 13 (2) ◽  
pp. 187-211
Author(s):  
Patricia E. Chu

The Paris avant-garde milieu from which both Cirque Calder/Calder's Circus and Painlevé’s early films emerged was a cultural intersection of art and the twentieth-century life sciences. In turning to the style of current scientific journals, the Paris surrealists can be understood as engaging the (life) sciences not simply as a provider of normative categories of materiality to be dismissed, but as a companion in apprehending the “reality” of a world beneath the surface just as real as the one visible to the naked eye. I will focus in this essay on two modernist practices in new media in the context of the history of the life sciences: Jean Painlevé’s (1902–1989) science films and Alexander Calder's (1898–1976) work in three-dimensional moving art and performance—the Circus. In analyzing Painlevé’s work, I discuss it as exemplary of a moment when life sciences and avant-garde technical methods and philosophies created each other rather than being classified as separate categories of epistemological work. In moving from Painlevé’s films to Alexander Calder's Circus, Painlevé’s cinematography remains at the forefront; I use his film of one of Calder's performances of the Circus, a collaboration the men had taken two decades to complete. Painlevé’s depiction allows us to see the elements of Calder's work that mark it as akin to Painlevé’s own interest in a modern experimental organicism as central to the so-called machine-age. Calder's work can be understood as similarly developing an avant-garde practice along the line between the bestiary of the natural historian and the bestiary of the modern life scientist.


Sign in / Sign up

Export Citation Format

Share Document