scholarly journals WAVE RUNUP ON DIKES AND BEACHES

2012 ◽  
Vol 1 (33) ◽  
pp. 19 ◽  
Author(s):  
Jill Pietropaolo ◽  
Nobuhisa Kobayashi ◽  
Jeffry A. Melby

In the United States, the Federal Emergency Management Agency (FEMA) is in the process of updating its coastal flood risk maps in order to determine which locations are threatened by storm surge and wave action. These maps require the prediction of extreme wave runup. A method for predicting the runup height along the entire coast must be robust, reliable, and applicable to many different coastal features. Kobayashi et al. (2008) developed a time-average probabilistic model that predicts wave runup statistics instead of the time series of shoreline elevation. This numerical cross-shore model, CSHORE, is extended to the wet-dry zone above the still water level to predict irregular wave runup on impermeable dikes and gentle impermeable slopes. To show the CSHORE’s capability in predicting runup on beaches with different geometries, the computed results from the model are compared to measured data from a variety of experiments. CSHORE is tested against 40 wave runup tests on an impermeable dike on a barred beach, 97 wave runup tests on an impermeable dike with a gently sloping beach, and 120 tests for wave runup on gentle uniform slopes. The measured 2% and 1% exceedence runup heights are predicted within errors of about 20%. The spectral significant wave height, Hmo, and a representative period are used for input to CSHORE. The measured and computed cross-shore variations of Hmo are also computed and compared to measured data to show the capabilities and limitations of CSHORE in regards to predicting to wave transformation. Both the spectral period, Tm-1,0, and the peak period Tp at x = 0 are adapted as representative periods used in CSHORE to assess the period effect in CSHORE. The tested CSHORE is ready for practical applications such as FEMA’s coastal flood mapping, and is a good practical choice because it can be used to predict beach and dune profile changes.

1990 ◽  
Vol 18 (1_part_1) ◽  
pp. 41-50
Author(s):  
F. Barbara Orlans

Pain scales classify the severity of pain inflicted on laboratory animals from little or none up to severe. A pain scale as part of public policy serves beneficial purposes that promote animal welfare. It can be used to educate people about the two alternatives of refinement and replacement, and the need to reduce animal pain. Furthermore, a pain scale has practical applications: 1) in review procedures for animal welfare concerns; 2) in developing policies on the use of animals in education; and 3) as a basis for collecting national data on animal experimentation, so that meaningful data can be collected on trends in reduction and control in animal pain. So far, only a few countries (including Sweden, the Netherlands, Canada and New Zealand) have adopted pain scales as part of their public policy. Most countries, including the United States, have not yet done so. The history of the development and adoption of pain scales by various countries is described and the case is presented for wider adoption of a pain scale in countries not currently using one.


2001 ◽  
Vol 91 (10) ◽  
pp. 948-955 ◽  
Author(s):  
David M. Gadoury ◽  
Robert C. Seem ◽  
Andrea Ficke ◽  
Wayne F. Wilcox

Vitis labruscana ‘Concord’ is a grape cultivar widely grown in the United States for processing into juice and other grape products. Concord grapes are sporadically but sometimes severely damaged by the grape powdery mildew pathogen, Uncinula necator. Although the foliage is often reported to be moderately resistant to powdery mildew, severe fruit infection occurs in some years. We observed the seasonal development of powdery mildew on leaves, rachises, and berries of unsprayed Concord grapevines. Inoculations of flower and fruit clusters revealed a brief period of berry susceptibility and a protracted period of rachis susceptibility. The rachis remained highly susceptible to infection, and the severity of rachis infection increased throughout the growing season until the rachis formed a periderm shortly before harvest. In contrast, berries were nearly immune to infection within 2 weeks after fruit set. Rachis and berry infections were detected before the disease was observed on foliage, and the incidence of rachis and berry infection often exceeded disease incidence observed on foliage until after fruit acquired substantial ontogenic resistance. Excellent control of fruit infection, and adequate control of leaf infection, was achieved by two fungicide applications targeted at the peak period of fruit susceptibility. Although Concord is thought to be moderately resistant to powdery mildew, the rachis is highly susceptible, and may be the avenue by which prebloom infections make their way onto the developing fruit. Late-season infection of the rachis neither spread to the fruit, nor did it cause fruit to drop prematurely, and may be of little economic consequence on fruit destined for processing. Although fruit of V. vinifera cultivars have been reported to remain susceptible to infection until berry sugar levels reach 8 to 15%, Concord fruit become nearly immune to infection nearly 6 weeks before this stage of development. Because powdery mildew does not become conspicuous on foliage until late summer, it is generally regarded as a late-season problem on Concord grapes, and previous management programs have reflected this belief. However, the greatest contribution to control of fruit infection is due to fungicides applied during the peak period of fruit susceptibility, from bloom until shortly after fruit set, long before the disease is observed on foliage.


Author(s):  
Aron Habte ◽  
Manajit Sengupta ◽  
Stephen Wilcox

The purpose of this study is two-fold: 1) To examine the performance of the Global Solar Insolation Project (GSIP) physics-based model in characterizing global horizontal solar radiation across the United States by comparing to the ground measured data, and 2) to examine improvements of the GSIP data to address temporal and spatial variations. The study enumerates and examines the spatial and temporal limitations of the GSIP model. Most comparisons demonstrate relatively good statistical agreement. However, the methodology used in the satellite model to distinguish microclimate conditions presents significant challenges, and the model requires refinement in addressing aerosol estimates, water vapor estimates, and clear sky optical properties. Satellite derived datasets are only available at half-hour intervals. Surface measurement can easily be made at temporal resolution in the order of seconds. Therefore intra-hour variability, an important quantity for understanding how power production in power plants will vary, cannot be directly derived from satellites. This paper illustrates how intra-hour variability in ground measurements cannot be captured by the satellite based datasets. We also discuss the potential for improved next-generation geostationary satellite data to improve the accuracy of surface radiation estimates.


Water ◽  
2018 ◽  
Vol 10 (9) ◽  
pp. 1147 ◽  
Author(s):  
Shanju Zhang ◽  
Liangsheng Zhu ◽  
Jianhua Li

The prediction of wave transformation and associated hydrodynamics is essential in the design and construction of reef top structures on fringing reefs. To simulate the transformation process with better accuracy and time efficiency, a shock-capturing numerical model based on the extended Boussinesq equations suitable for rapidly varying topography with respect to wave transformation, breaking and runup, is established. A hybrid finite volume–finite difference scheme is used to discretize conservation form of the extended Boussinesq equations. The finite-volume method with a HLL Riemann solver is applied to the flux terms, while finite-difference discretization is applied to the remaining terms. The fourth-order MUSCL (Monotone Upstream-centered Schemes for Conservation Laws) scheme is employed to create interface variables, with in which the van-Leer limiter is adopted to improve computational accuracy on complex topography. Taking advantage of van-Leer limiter, a nested model is used to take account of both computational run time and accuracy. A modified eddy viscosity model is applied to better accommodate wave breaking on steep reef slopes. The established model is validated with laboratory measurements of regular and irregular wave transformation and breaking on steep fringing reefs. Results show the model can provide satisfactory predictions of wave height, mean water level and the generation of higher harmonics.


Author(s):  
Vasiliki Katsardi ◽  
Chris Swan

This paper describes a new series of laboratory observations, undertaken in a purpose built wave flume, in which a number of scaled simulations of realistic ocean spectra were allowed to evolve over a range of mild bed slopes. The purpose of the study was to examine the distribution of wave heights and its dependence on the local water depth, d, the local bed slope, m, and the nature of the input spectrum; the latter considering variations in the spectral peak period, Tp, the spectral bandwidth and the wave steepness. The results of the study show that for mild bed slopes the statistical distributions of wave heights are effectively independent of both the bed slope and the spectral bandwidth. However, the peak period plays a very significant role in the sense that it alters the effective water depth. Following detailed comparisons with the measured data, the statistical distributions for wave heights in relatively deep water are found to be in reasonable agreement with the Forristall [1] and Glukhovskii [2] distributions. For intermediate water depths, the Battjes & Groenendijk [3] distribution works very well. However, for the shallowest water depths none of the existing distributions provides good agreement with the measured data; all leading to an over-estimate of the largest wave heights.


Author(s):  
Shigeki Sakai ◽  
Kouetsu Hiyamizu ◽  
Hiroshi Saeki

Foods ◽  
2022 ◽  
Vol 11 (2) ◽  
pp. 174
Author(s):  
Hefei Zhao ◽  
Roberto J. Avena-Bustillos ◽  
Selina C. Wang

Olive pomace (OP) is a valuable food byproduct that contains natural phenolic compounds with health benefits related to their antioxidant activities. Few investigations have been conducted on OP from the United States while many studies on European OP have been reported. OP of Arbequina, the most common cultivar from California, was collected and extracted by water, 70% methanol and 70% ethanol, followed by purification using macroporous absorbing resin. Results showed that the extractable total phenolic content (TPC) was 36–43 mg gallic acid equivalents (GAE)/g in pitted, drum-dried defatted olive pomace (DOP), with major contributions from hydroxytyrosol, oleuropein, rutin, verbascoside, 4-hydroxyphenyl acetic acid, hydroxytyrosol-glucoside and tyrosol-glucoside. Macroporous resin purification increased TPC by 4.6 times the ethanol crude extracts of DOP, while removing 37.33% total sugar. The antioxidant activities increased 3.7 times Trolox equivalents (TrE) by DPPH and 4.7 times TrE by ferric reducing antioxidant power (FRAP) in the resin purified extracts compared to the ethanol crude extracts. This study provided a new understanding of the extraction of the bioactive compounds from OP which could lead to practical applications as natural antioxidants, preservatives and antimicrobials in clean-label foods in the US.


Author(s):  
Rosalia Aparecida Moreira ◽  
Hugo Rodrigues Araujo

Em 1986, foi criado nos Estados Unidos a Rails-to-Trails Conservancy, entidade sem fins lucrativos com a missão de contribuir para conservação do patrimônio ferroviário, transformando os ramais abandonados em trilhas ferroviárias destinadas, exclusivamente, para caminhantes, ciclistas e cavaleiros. Com essa perspectiva, há 15 anos iniciou-se uma mobilização comunitária para transformar o antigo Ramal Ferroviário Corinto-Diamantina, localizado no Vale do Jequitinhonha/MG, na primeira trilha ferroviária do Brasil, denominada Trilha Verde da Maria Fumaça - TVMF. Além da conservação dos bens ferroviários, a TVMF busca a dinamização da economia local através do Turismo de Base Comunitária. Este artigo corresponde a um estudo de caso da TVMF, de caráter exploratório-descritivo. A pesquisa envolveu revisão bibliográfica e entrevista do gestor da ONG Caminhos da Serra, utilizando questionário semiestruturado. A análise qualitativa dos dados permitiu obter resultados que proporcionam o entendimento sobre a TVMF, contribuem para a abertura da discussão sobre trilhas ferroviárias no Brasil e fornecem informações para subsidiar aplicações práticas em outras ferrovias que se encontram abandonadas. Trilha Verde da Maria Fumaça: railroad heritage and tourism in the Vale do Jequitinhonha (Brazil). In 1986, the Rails-to-Trails Conservancy was created in the United States, a nonprofit organization with a mission to contribute to conservation of the railway heritage, turning extensions abandoned on rails trails, designed exclusively for walkers, cyclists and riders. With this perspective, 15 years ago a community began a mobilization to transform the old Railway Corinto-Diamantina, located in Vale do Jequitinhonha / MG, into the first rail trails in Brazil, called Trilha Verde da Maria Fumaça - TVMF. In addition to the conservation of rail assets, TVMF seeks to stimulate the local economy through the Community Based Tourism. This article is an exploratory and descriptive case study of TVMF. The research involved literature review and interview questions for the manager of the NGO Caminhos da Serra, by using semi-structured questionnaire. Through qualitative analysis of data it was possible to get results that provide an understanding of the TVMF, contribute to opening the discussion about rails trails in Brazil, and provide information to support practical applications in other railways that are abandoned. KEYWORDS: Railway Tourism; Sustainable Tourism; Rails Trails.


1978 ◽  
Vol 104 (4) ◽  
pp. 439-442
Author(s):  
John P. Ahrens ◽  
Martin F. Titus
Keyword(s):  

Sign in / Sign up

Export Citation Format

Share Document