scholarly journals EXPERIMENTAL AND NUMERICAL MODELING OF TSUNAMI LOADING ON STRUCTURES

2011 ◽  
Vol 1 (32) ◽  
pp. 2 ◽  
Author(s):  
Ioan Nistor ◽  
Dan Palermo ◽  
Andrew Cornett ◽  
Taofiq Al-Faesly
Keyword(s):  
Numerical Modeling ◽  
Field Data ◽  
Structural Engineering ◽  
Coastal Areas ◽  
Structural Elements ◽  
Engineering Project ◽  
The Past ◽  
The Impact ◽  
Experimental And Numerical Modeling ◽  
Comprehensive Research Program

The results of a comprehensive research program on tsunami-induced forces on infrastructure located in coastal areas are presented. This research project is the result of an extensive interdisciplinary project (coastal and structural engineering) which spanned over the past five years and which included several field data reconnaissance missions, as well as analytical, experimental and numerical modeling of the extreme hydrodynamic forces on buildings and their component structural elements. The purpose of this research and engineering project is to elucidate the complex hydrodynamic mechanisms of the impact and extreme loadings on buildings and to properly quantify loads and further propose and derive new formulations for the design of structures located in the vicinity of the shoreline in tsunami-prone coastal areas.

scholarly journals CFD Modeling of Effluent Discharges: A Review of Past Numerical Studies

Water ◽  
2020 ◽  
Vol 12 (3) ◽  
pp. 856 ◽  
Author(s):  
Abdolmajid Mohammadian ◽  
Hossein Kheirkhah Gildeh ◽  
Ioan Nistor
Keyword(s):  
Numerical Modeling ◽  
Near Field ◽  
Cfd Modeling ◽  
Experimental Investigations ◽  
Field Zone ◽  
Jet Mixing ◽  
The Past ◽  
Cfd Models ◽  
Effluent Discharge ◽  
The Impact

Effluent discharge mixing and dispersion have been studied for many decades. Studies began with experimental investigations of geometrical and concentration characteristics of the jets in the near-field zone. More robust experiments were performed using Laser-Induced Fluorescence (LIF) and Particle Image Velocimetry (PIV) systems starting in the 20th century, which led to more accurate measurement and analysis of jet behavior. The advancement of computing systems over the past two decades has led to the development of various numerical methods, which have been implemented in Computational Fluid Dynamics (CFD) codes to predict fluid motion and characteristics. Numerical modeling of mixing and dispersion is increasingly preferred over laboratory experiments of effluent discharges in both academia and industry. More computational resources and efficient numerical schemes have helped increase the popularity of using CFD models in jet and plume modeling. Numerous models have been developed over time, each with different capabilities to facilitate the investigation of all aspects of effluent discharges. Among these, Reynolds-averaged Navier-Stokes (RANS) and Large Eddy Simulations (LES) are at present the most popular CFD models employing effluent discharge modeling. This paper reviews state-of-the-art numerical modeling studies for different types and configurations of discharges, including positively and negatively buoyant discharges, which have mostly been completed over the past two decades. The numerical results of these studies are summarized and critically discussed in this review. Various aspects related to the impact of turbulence models, such as k-ε and Launder-Reece-Rodi (LRR) models, are reviewed herein. RANS and LES models are reviewed, and implications for the simulation of jet and plume mixing are discussed to develop a reference for future researchers performing numerical investigations on jet mixing and dispersion.

Fluorescent potentiometric dyes for membrane-potential imaging

1994 ◽  
Vol 52 ◽  
pp. 166-167
Author(s):  
Leslie M. Loew
Keyword(s):  
Membrane Potential ◽  
Single Cells ◽  
Quantitative Imaging ◽  
Optical Recording ◽  
Biological Processes ◽  
Major Focus ◽  
The Past ◽  
Excitable Systems ◽  
Major Application ◽  
The Impact

A major application of potentiometric dyes has been the multisite optical recording of electrical activity in excitable systems. After being championed by L.B. Cohen and his colleagues for the past 20 years, the impact of this technology is rapidly being felt and is spreading to an increasing number of neuroscience laboratories. A second class of experiments involves using dyes to image membrane potential distributions in single cells by digital imaging microscopy - a major focus of this lab. These studies usually do not require the temporal resolution of multisite optical recording, being primarily focussed on slow cell biological processes, and therefore can achieve much higher spatial resolution. We have developed 2 methods for quantitative imaging of membrane potential. One method uses dual wavelength imaging of membrane-staining dyes and the other uses quantitative 3D imaging of a fluorescent lipophilic cation; the dyes used in each case were synthesized for this purpose in this laboratory.

Perceived Burden of Informal Caregivers of a Chronically Ill Older Family Member

GeroPsych ◽  
2011 ◽  
Vol 24 (3) ◽  
pp. 143-154 ◽  
Author(s):  
Elmar Gräßel ◽  
Raffaela Adabbo
Keyword(s):  
Family Member ◽  
Informal Caregiver ◽  
Chronically Ill ◽  
Stress Model ◽  
The Past ◽  
Perceived Burden ◽  
Hypothetical Construct ◽  
Care Situation ◽  
The Impact ◽  
Further Development

The burden of caregivers has been intensively researched for the past 30 years and has resulted in a multitude of individual findings. This review illustrates the significance of the hypothetical construct of perceived burden for the further development and design of the homecare situation. Following explanations regarding the term informal caregiver, we derive the construct burden from its conceptual association with the transactional stress model of Lazarus and Folkman. Once the extent and characteristics of burden have been set forth, we then present the impact of perceived burden as the care situation. The question of predictors of burden will lead into the last section from which implications can be derived for homecare and relief of caregivers.

Soziale Disziplinierung im flexiblen Kapitalismus

2004 ◽  
Vol 34 (136) ◽  
pp. 339-356
Author(s):  
Tobias Wölfle ◽  
Oliver Schöller
Keyword(s):  
Social Welfare ◽  
Second Step ◽  
Social Rights ◽  
Federal Law ◽  
Capitalist Development ◽  
The Core ◽  
The Past ◽  
The Impact ◽  
Municipal Level

Under the term “Hilfe zur Arbeit” (aid for work) the federal law of social welfare subsumes all kinds of labour disciplining instruments. First, the paper shows the historical connection of welfare and labour disciplining mechanisms in the context of different periods within capitalist development. In a second step, against the background of historical experiences, we will analyse the trends of “Hilfe zur Arbeit” during the past two decades. It will be shown that by the rise of unemployment, the impact of labour disciplining aspects of “Hilfe zur Arbeit” has increased both on the federal and on the municipal level. For this reason the leverage of the liberal paradigm would take place even in the core of social rights.

Regulatory and sustainability initiatives lead to improved polyaminopolyamide epichlorohydrin (PAE) wet-strength resins and paper products

TAPPI Journal ◽  
2018 ◽  
Vol 17 (09) ◽  
pp. 519-532 ◽  
Author(s):  
Mark Crisp ◽  
Richard Riehle
Keyword(s):  
Health And Safety ◽  
Cost Effective ◽  
Worker Safety ◽  
Regulatory Requirements ◽  
Wet Strength ◽  
The Past ◽  
Consumer Safety ◽  
Federal Institute ◽  
Sustainability Initiatives ◽  
The Impact

Polyaminopolyamide-epichlorohydrin (PAE) resins are the predominant commercial products used to manufacture wet-strengthened paper products for grades requiring wet-strength permanence. Since their development in the late 1950s, the first generation (G1) resins have proven to be one of the most cost-effective technologies available to provide wet strength to paper. Throughout the past three decades, regulatory directives and sustainability initiatives from various organizations have driven the development of cleaner and safer PAE resins and paper products. Early efforts in this area focused on improving worker safety and reducing the impact of PAE resins on the environment. These efforts led to the development of resins containing significantly reduced levels of 1,3-dichloro-2-propanol (1,3-DCP) and 3-monochloropropane-1,2-diol (3-MCPD), potentially carcinogenic byproducts formed during the manufacturing process of PAE resins. As the levels of these byproducts decreased, the environmental, health, and safety (EH&S) profile of PAE resins and paper products improved. Recent initiatives from major retailers are focusing on product ingredient transparency and quality, thus encouraging the development of safer product formulations while maintaining performance. PAE resin research over the past 20 years has been directed toward regulatory requirements to improve consumer safety and minimize exposure to potentially carcinogenic materials found in various paper products. One of the best known regulatory requirements is the recommendations of the German Federal Institute for Risk Assessment (BfR), which defines the levels of 1,3-DCP and 3-MCPD that can be extracted by water from various food contact grades of paper. These criteria led to the development of third generation (G3) products that contain very low levels of 1,3-DCP (typically <10 parts per million in the as-received/delivered resin). This paper outlines the PAE resin chemical contributors to adsorbable organic halogens and 3-MCPD in paper and provides recommendations for the use of each PAE resin product generation (G1, G1.5, G2, G2.5, and G3).

Influence of the distribution of the shear walls on the seismic response of the buildings

2020 ◽  
Vol 15 (1) ◽  
pp. 37-44
Author(s):  
El Mehdi Echebba ◽  
Hasnae Boubel ◽  
Oumnia Elmrabet ◽  
Mohamed Rougui
Keyword(s):  
Structural Analysis ◽  
Seismic Response ◽  
Natural Frequency ◽  
Structural Design ◽  
Structural Response ◽  
Shear Walls ◽  
Structural Elements ◽  
Analysis Software ◽  
Ansys Apdl ◽  
The Impact

Abstract In this paper, an evaluation was tried for the impact of structural design on structural response. Several situations are foreseen as the possibilities of changing the distribution of the structural elements (sails, columns, etc.), the width of the structure and the number of floors indicates the adapted type of bracing for a given structure by referring only to its Geometric dimensions. This was done by studying the effect of the technical design of the building on the natural frequency of the structure with the study of the influence of the distribution of the structural elements on the seismic response of the building, taking into account of the requirements of the Moroccan earthquake regulations 2000/2011 and using the ANSYS APDL and Robot Structural Analysis software.

USING FIELD DATA FOR THE EVALUATION OF THE IMPACT OF ULTRA-LOW FREQUENCY MOTIONS ON THE FATIGUE OF MOORING LINES

2019 ◽  
Author(s):  
Guilherme Borzacchiello ◽  
Carl Albrecht ◽  
Fabricio N Correa ◽  
Breno Jacob ◽  
Guilherme da Silva Leal
Keyword(s):  
Field Data ◽  
Low Frequency ◽  
Mooring Lines ◽  
The Impact

Overseas Development Administration. A Guide to Social Analysis for Projects in Developing Countries. London: HMSO. 1995. viii+248 pages. Hardbound. £18.95.

1996 ◽  
Vol 35 (2) ◽  
pp. 189-190
Author(s):  
Mir Annice Mahmood
Keyword(s):  
Developing Countries ◽  
Social Change ◽  
Practical Experience ◽  
Development Projects ◽  
Social Analysis ◽  
Economic Perspective ◽  
Human Environment ◽  
The Past ◽  
The Impact ◽  
Overseas Development

This book, hereinafter referred to as the Guide, has been developed for those social analysts (e.g., anthropologists, sociologists, and human geographers) who have had little or no practical experience in applying their knowledge as development practitioners. In the past, development projects would be analysed from a narrow financial and economic perspective. But with the evolution of thinking on development, this narrow financial and economic aspect has now been broadened to include the impact on society as the very meaning of development has now come to symbolise social change. Thus, development is not restricted only to plans and figures; the human environment in its entirety is now considered for analysis while designing and implementing development projects.

A MODELING SYSTEM FOR CLIMATE CHANGE RISK ASSESSMENT, MANAGEMENT AND HEDGING IN COASTAL AREAS

2017 ◽  
Author(s):  
Sergei Soldatenko ◽  
Sergei Soldatenko ◽  
Genrikh Alekseev ◽  
Genrikh Alekseev ◽  
Alexander Danilov ◽  
...  
Keyword(s):  
Climate Change ◽  
Risk Assessment ◽  
Coastal Areas ◽  
Mitigation Strategies ◽  
System Structure ◽  
The Arctic ◽  
Risk Modeling ◽  
Wide Range ◽  
Adverse Weather ◽  
The Impact

Every aspect of human operations faces a wide range of risks, some of which can cause serious consequences. By the start of 21st century, mankind has recognized a new class of risks posed by climate change. It is obvious, that the global climate is changing, and will continue to change, in ways that affect the planning and day to day operations of businesses, government agencies and other organizations and institutions. The manifestations of climate change include but not limited to rising sea levels, increasing temperature, flooding, melting polar sea ice, adverse weather events (e.g. heatwaves, drought, and storms) and a rise in related problems (e.g. health and environmental). Assessing and managing climate risks represent one of the most challenging issues of today and for the future. The purpose of the risk modeling system discussed in this paper is to provide a framework and methodology to quantify risks caused by climate change, to facilitate estimates of the impact of climate change on various spheres of human activities and to compare eventual adaptation and risk mitigation strategies. The system integrates both physical climate system and economic models together with knowledge-based subsystem, which can help support proactive risk management. System structure and its main components are considered. Special attention is paid to climate risk assessment, management and hedging in the Arctic coastal areas.

Sign in / Sign up

Export Citation Format

Share Document