scholarly journals WAVE FORCES ON ARMOR BLOCKS

1988 ◽  
Vol 1 (21) ◽  
pp. 184 ◽  
Author(s):  
M.A. Losada ◽  
R. Medina ◽  
M. Alejo
Keyword(s):  
Boundary Conditions ◽  
Solitary Waves ◽  
Three Dimensional ◽  
Wave Forces ◽  
Experimental Measurements ◽  
Hydrodynamic Coefficients ◽  
Three Dimensional Flow ◽  
Dimensional Flow ◽  
Instantaneous Values ◽  
Wave Passage

Experimental measurements of hydrodynamic forces on a cubic block near the bottom under solitary waves were carried out. Horizontal and vertical forces were recorded and instantaneous and averaged values of hydrodynamic coefficients CD, C„ and C,_ for different boundary conditions, gap between block and bottom, e, and two or three-dimensional flow, were obtained. Horizontal and vertical forces were found to depend strongly on e/D, where D is the block side . Instantaneous values of hydrodynamic coefficients vary considerably during the wave passage and differ appreciably from the averaged coefficients.

Three-dimensional flow of Powell–Eyring nanofluid with heat and mass flux boundary conditions

2016 ◽  
Vol 25 (7) ◽  
pp. 074701 ◽  
Author(s):  
Tasawar Hayat ◽  
Ikram Ullah ◽  
Taseer Muhammad ◽  
Ahmed Alsaedi ◽  
Sabir Ali Shehzad
Keyword(s):  
Boundary Conditions ◽  
Mass Flux ◽  
Three Dimensional ◽  
Three Dimensional Flow ◽  
Dimensional Flow ◽  
Flux Boundary Conditions

A Three-Dimensional Numerical Method for Turbomachinery Blading

1992 ◽  
Author(s):  
C. W. Gu ◽  
J. Z. Xu ◽  
J. Y. Du
Keyword(s):  
Boundary Conditions ◽  
Numerical Method ◽  
Stream Function ◽  
Three Dimensional ◽  
Computational Results ◽  
Three Dimensional Flow ◽  
Dimensional Flow ◽  
Stream Functions ◽  
Derivatives Of ◽  
Convergent Solution

By inversing one of the stream functions and their principal equations in a three–dimensional flow the equations with the second–order partial derivatives of both the coordinate and another stream function are derived. The corresponding boundary conditions are easily specified. Based on these equations and the boundary conditions the convergent solution for turbomachinery blading is obtained. The computational results show that the method is simple and effective.

The Calculation of Three Dimensional Viscous Flow Through Multistage Turbomachines

1990 ◽  
Author(s):  
J. D. Denton
Keyword(s):  
Boundary Conditions ◽  
Unsteady Flow ◽  
Viscous Flow ◽  
Calculation Method ◽  
Three Dimensional ◽  
Mixing Process ◽  
Three Dimensional Flow ◽  
Flow Calculation ◽  
Dimensional Flow ◽  
Flow Through

The extension of a well established three dimensional flow calculation method to calculate the flow through multiple turbomachinery blade rows is described in this paper. To avoid calculating the unsteady flow, which is inherent in any machine containing both rotating and stationary blade rows, a mixing process is modelled at a calculating station between adjacent blade rows. The effects of this mixing on the flow within the blade rows may be minimised by using extrapolated boundary conditions at the mixing plane.

Meeting the Thermal-Hydraulic Analysis Needs for Advanced Gas Reactor Systems

2008 ◽  
Author(s):  
Richard R. Schultz
Keyword(s):  
Boundary Conditions ◽  
Systems Analysis ◽  
System Analysis ◽  
Three Dimensional ◽  
Coupled Systems ◽  
Analysis Tool ◽  
System Behavior ◽  
Three Dimensional Flow ◽  
Dimensional Flow ◽  
Accident Conditions

Simulation of some fluid phenomena associated with Generation IV reactors requires the capability of modeling mixing in two- or three-dimensional flow. At the same time, the flow condition of interest is often transient and depends upon boundary conditions dictated by the system behavior as a whole. Computational fluid dynamics (CFD) is an ideal tool for simulating mixing and three-dimensional flow in system components, whereas a system analysis tool is ideal for modeling the entire system. This paper presents the reasoning which has led to coupled CFD and systems analysis code software to analyze the behavior of advanced reactor fluid system behavior. In addition, the kinds of scenarios where this capability is important are identified. The important role of a coupled CFD/systems analysis code tool in the overall calculation scheme for a Very High Temperature Reactor is described. The manner in which coupled systems analysis and CFD codes will be used to evaluate the mixing behavior in a plenum for transient boundary conditions is described. The calculation methodology forms the basis for future coupled calculations that will examine the behavior of such systems at a spectrum of conditions, including transient accident conditions, that define the operational and accident envelope of the subject system. The methodology and analysis techniques demonstrated herein are a key technology that in part forms the backbone of the advanced techniques employed in the evaluation of advanced designs and their operational characteristics for the Generation IV advanced reactor systems.

Three-dimensional flow of nanofluid with heat and mass flux boundary conditions

2017 ◽  
Vol 55 (4) ◽  
pp. 1495-1510 ◽  
Author(s):  
Tasawar Hayat ◽  
Arsalan Aziz ◽  
Taseer Muhammad ◽  
Ahmed Alsaedi
Keyword(s):  
Boundary Conditions ◽  
Mass Flux ◽  
Three Dimensional ◽  
Three Dimensional Flow ◽  
Dimensional Flow ◽  
Flux Boundary Conditions
Sign in / Sign up

Export Citation Format

Share Document