scholarly journals THE NEARSHORE SEDIMENT TRANSPORT STUDY

1978 ◽  
Vol 1 (16) ◽  
pp. 92 ◽  
Author(s):  
Richard J. Seymour ◽  
David B. Duane

The models for predicting longshore transport of sediment along straight coastlines that are presently in general use were derived empirically from very sparse measurements of both the forcing function (waves and currents) and the response function (sediment motions). A detailed treatment of these data sets is contained in Greer and Madsen (1978). In addition to the generally unsatisfactory nature of the basic measurements upon which they were based, the models may be deficient because they fail to employ such potentially significant factors as wind stress, sediment size distribution, bottom slope and spatial variations in waves and currents, including the effects of rip currents. Although these models have served certain engineering needs, there is a strong measure of uncertainty in the coastal engineering community about their general applicability. Certainly, because they are empirical rather than physically reasoned models, there is no rational means for extending their usefulness to predicting transport where coastlines are not straight -- such as the case of a tidal inlet. The economic impact of sediment transport in the nearshore regime is enormous and the need for improved predictive tools appears to be universally accepted. To be most useful, these improved models must be globally applicable. This implies very strongly that they must be based upon a thorough understanding of surf zone dynamics and the details of the response of the sediment. The surf zone flow fields are highly complex and nonlinear, implying an equally complex and difficult system of sediment responses. Characterizing the entire forcing and response functions simultaneously requires large and expensive field measurement programs that greatly exceed the present state of the art of measurement and analysis.' The approach of the last two decades of single investigators working at laboratory scale or in the ocean with a few single point measurements would not appear to ever meet these needs. However, the present costs for coastal dredging and shoreline protection, which can be measured in billions of dollars on a world scale, argue for a major undertaking to develop better predictive tools. In an attempt to satisfy these needs, an ad hoc group was formed at the Fifteenth Coastal Engineering Conference in Honolulu to plan a large scale and coordinated series of investigations leading to improved sediment transport predictive models. Less than a year later, the Nearshore Sediment Transport Study was initiated under the sponsorship of the Office of Sea Grant.

1980 ◽  
Vol 1 (17) ◽  
pp. 87
Author(s):  
R.J. Seymour ◽  
C.G. Gable

The Nearshore Sediment Transport Study (NSTS) is a multi-institutional research program with the objective of developing improved engineering predictive models for transport of sediment. both longshore and cross shore, by waves and currents. The program is sponsored by the Office of Sea Grant (OSG), an agency of the National Oceanic and Atmospheric Administration (NOAA). A general introduction to the objectivesi schedule and organization of the NSTS program was presented at the 16th ICCE by Seymour and Duane (1979). Shortly after the Hamburg Conference, the first major field experiment was conducted at Torrey Pines Beach. California, in November, 1978. The second major experiment was conducted 14 months later in February, 1980 at Leadbetter Beach, in Santa Barbara, California. Each of these experiments involved levels of measurement intensity that appear to exceed by a large factor those of any similar work. Because of the large data sets obtained and the importance of these data to other investigators in coastal processes, the NSTS project is making them available promptly. In the following sections, a general description will be given for each of these experiments and information supplied on how the data may be obtained.


1982 ◽  
Vol 1 (18) ◽  
pp. 97
Author(s):  
J. Zacks

The cost of many coastal projects is often increased by the expensive beach repair and maintenance required to remedy the destabilising effects of structures on the adjoining coastline. Physical and/or mathematical models have been developed for use in planning these projects in order to predict and quantify the effects of marine sediment transport on the coastal topography. Such models need to be calibrated against prototype data and one method of gauging volumetric sediment movement is by successive bathymetric/ topographic profiting surveys which are performed seasonally and annually. Since large quantities of sediment are related to small changes in bed elevation it is clear that this profiling needs to be done with the utmost precision* The areas most affected extend from the beach through the surf zone to water depths of about 25 metres. The surf zone in particular is a dynamic and hostile area which falls outside the traditional activities of both the hydrographic and land surveyors. Consequently innovative methods, deficient in sound survey principle and practice, have often been pursued in this area without any attempt being made to assess the tolerance on the data. This paper attempts to show that it is possible to produce reliable and verifiable results to the required accuracy by using conventional survey equipment and techniques, also by taking the necessary precautions against the many possible sources of survey error. The procedures and techniques described have evolved from NRIO's involvement over the past decade in major projects at Richards Bay, Durban, Koeberg and in False Bay. The results of a recent verification investigation are fully reported in this paper.


2016 ◽  
Vol 63 (1) ◽  
pp. 63-77 ◽  
Author(s):  
Rafał Ostrowski ◽  
Magdalena Stella

Abstract The paper deals with the sandy coastal zone at Lubiatowo in Poland (the south Baltic Sea). The study comprises experimental and theoretical investigations of hydrodynamic and lithodynamic processes in the coastal region located close to the seaward boundary of the surf zone and beyond the surf zone. The analysis is based on field data collected at the IBW PAN Coastal Research Station in Lubiatowo. The data consist of wind velocity reconstructed from the long-term wave climate, deep-water wave buoy records and sea bottom soil parameters. Nearbed flow velocities induced by waves and currents, as well as bed shear stresses are theoretically modelled for various conditions to determine sediment motion regimes in the considered area. The paper discusses the possibility of occasional intensive sediment transport and the occurrence of distinct sea bed changes at bigger water depths.


2012 ◽  
Vol 1 (33) ◽  
pp. 57 ◽  
Author(s):  
Ravindra Jayaratne ◽  
Yasufumi Takayama ◽  
Tomoya Shibayama

Study of beach morphological changes under storm conditions and its prediction capability are of paramount importance in coastal zone management. Seabed sediment is picked up violently in and outside the surf zone due to suspension mechanisms, therefore a considerable amount of sand is transported in coastal waters due to such mechanisms. For the construction of an accurate beach morphological model, it is necessary to elucidate the sediment suspension and to introduce it properly into the modelling of sediment transport. Jayaratne and Shibayama (2007) developed a complete set of explicit theoretical formulae to predict the time-averaged concentration on sandy beaches due to three suspension mechanisms: a) vortical motion over wave-generated sand ripples, b) from sheet flow, and c) turbulent motion under breaking waves. The present paper focuses on the development of a quasi-3D beach deformation model using the sediment concentration models of Jayaratne and Shibayama (2007), the bed load model of Watanabe (1982), the wave propagation model of Onaka et al. (1988), the nearshore current model of Philips (1977) and the undertow model of Okayasu et al. (1990) to predict the large-scale morphodynamics of sandy beaches. The predicted beach profiles and total sediment transport rates were compared with two sets of large-scale laboratory experimental data [Kajima et al. (1983); Kraus and Larson (1988)] and Seisho beach at Kanagawa Prefecture, Japan. It can be concluded that the present numerical model is capable of predicting sediment transport direction, on-offshore sand bar formation and the general trend of the beach profiles of large-scale erosive- and accretive-type sandy beaches to a satisfactory level.


2012 ◽  
Vol 1 (33) ◽  
pp. 66 ◽  
Author(s):  
Raul Gonzalez ◽  
Qingping Zou ◽  
Shunqi Pan

This paper presents the results from an integrated modelling system investigating the effects of a wave farm on nearshore sediment transport. Wave Hub project is a large scale demonstration site for the development of the operation of arrays of wave energy generation devices located at the southwest coast of the UK where multiple field measurements took place. The two-way coupled SWAN and ROMS models with nested modelling system were set up at the Wave Hub site and run with and without a wave farm. The model results show that the presence of the wave farm has significant impacts on the nearshore circulation, bed shear stresses and sediment transport. The morphological changes are also altered by the wave farm. The study is the key element for the wave resource characterization and environmental impact assessment of the wave farm.


Author(s):  
Sara Dionisio Antonio ◽  
Jebbe van der Werf ◽  
Bart Vermeulen ◽  
Ivan Caceres ◽  
Jose M. Alsina ◽  
...  

The swash zone is a highly dynamic boundary between the beach and the surf zone. Swash processes determine whether sediment is either stored on the upper beach or is transported offshore, and thus strongly affect shoreline evolution. The present research focuses on the hydrodynamics, sand transport processes and net sediment transport in the swash zone through a series of large-scale wave flume experiments. This research aims to improve the understanding of swash zone sand transport processes, in particular the role of cross-shore sand advection and wave-swash interactions, and bring new detailed insights into the relation between intra-swash processes and net sand transport rates.Recorded Presentation from the vICCE (YouTube Link): https://youtu.be/tYvJ0pML-kU


Sign in / Sign up

Export Citation Format

Share Document