scholarly journals GENERATION OF TROUGHS BY DENSITY CURRENTS

1976 ◽  
Vol 1 (15) ◽  
pp. 126
Author(s):  
Hans Speekenbrink

Along the northern bank of the so-called "Maasgeul" scour has occurred, causing a trough. It is concluded from field measurements that the trough development is induced by density currents along the slope of the bank. The stratified flow system is dealt with mathematically. The calculated results are compared with the field measurements and agree fairly well. Trough development can be avoided by flattening the slope or by a bottom protection.

Author(s):  
Zuradzman Mohamad Razlan ◽  
Ryota Isobe ◽  
Yasuhiro Mizuno ◽  
Hiroaki Goshima ◽  
Masafumi Hirota ◽  
...  

The gas-liquid flow distributions in multi-pass upward parallel channels that simulate the evaporator for the automobile air-conditioning system were examined experimentally. Attention was directed to the influences of the backpressure condition at the branch outlets and of the flow-inlet condition at the header entrance on the gas-liquid distributions to the branches. Experiments were conducted in an isothermal air-water flow system. The influence of the backpressure condition on the flow distributions changed depending on the flow-inlet condition. In the stratified-flow inlet, the backpressure condition was highly influential in both the air and water distributions, and the uniform water distribution that was ideal for the evaporators could not be achieved even if air was distributed uniformly to all branches. In the mist-flow inlet, the water distribution was insensitive to the backpressure conditions and its uniformity was improved in comparison with that in the stratified-flow inlet.


2021 ◽  
Author(s):  
Xiaoyu Wang ◽  
Lei Hou ◽  
Xueyu Geng ◽  
Peibin Gong ◽  
Honglei Liu

The characterization of the proppant transport at a field-engineering scale is still challenging due to the lack of direct subsurface measurements. Features that control the proppant transport may link the experimental and numerical observations to the practical operations at a field scale. To improve the numerical and laboratory simulations, we propose a machine-learning-based workflow to evaluate the essential features of proppant transport and their corresponding calculations. The proppant flow in fractures is estimated by applying the Gated recurrent unit (GRU) and Support-vector machine (SVM) algorithms to the measurements obtained from shale gas fracturing operations. Over 430,000 groups of fracturing data are collected and pre-processed by the proppant transport models to calculate key features, including settlement, stratified flow and inception of settled particles. The features are then fed into machine learning algorithms for pressure prediction. The root mean squared error (RMSE) is used as the criterion for ranking selected features via the control variate method. Our result shows that the stratified-flow feature (fracture-level) possesses better interpretations for the proppant transport, in which the Bi-power model helps to produce the best predictions. The settlement and inception features (particle-level) perform better in cases that the pressure fluctuates significantly, indicating that more complex fractures may have been generated. Moreover, our analyses on the remaining errors in the pressure-ascending cases suggest that (1) an introduction of the alternate-injection process, and (2) the improved calculation of proppant transport in complex fracture networks and highly-filled fractures will be beneficial to both experimental observations and field applications.


2019 ◽  
Vol 3 (2) ◽  
Author(s):  
Jaime Alberto Cavazos Álvarez ◽  
Gerardo Carrasco-Núñez

The Xáltipan ignimbrite (XI) records the largest single-eruption of the Trans-Mexican Volcanic Belt up to date (≥344 km3 uncompacted volume). As most large ignimbrites, the XI presents common challenges when mapping. These are abrupt welding variations, burial by younger units near other volcanic sources, and highly eroded deposits in active-water valleys. In this work, we deal with these issues by integrating classical cartographic techniques such as field measurements, geometric projections of energy lines and construction of geologic sections, with a GIS-based methodology that quantifies the eroded bulk. As a result, we obtained a map with the main XI features that is presented in an interactive format. Furthermore, we discuss the resources used for the map construction and how the results contributed to the interpretation of the eruptive history. These contributions include: 1) the energy lines point to a low-height pyroclastic density currents source, typical of caldera-forming, boiling-over eruptions; 2) the landscape of the XI, coupled with the geologic sections, indicate that in the proximal facies the ignimbrite filled a volcanic field, leaving a radially shaped distribution with a flat surface, while in the distal facies it channelized into a steep mountainous ground; and 3) the geologic sections in the valley areas, where the active rivers highly eroded the original XI deposits, revealed the preferential development of welded zones along channel centers.


2009 ◽  
Vol 147 (3) ◽  
pp. 391-415 ◽  
Author(s):  
PAUL D. COLE ◽  
CLAUDIO SCARPATI

AbstractWe integrate the different contemporary sources together with new field data on the pyroclastic deposits to make a new volcanological reconstruction of the explosive phases of the 1944 Vesuvius eruption. We adopt the four successive phases of the eruption first defined by Imbò (1945), who made the most detailed contemporary description of the eruption: Phase 1 – effusive, Phase 2 – lava fountains, Phase 3 – mixed explosions and Phase 4 – seismic-explosive. Phase 1 consisted of four days of effusive activity. Phase 2 generated eight successive lava fountains which formed agglutinated spatter in a restricted area around the crater. At distances of > 1 km from the crater, reverse graded, well-sorted, scoria lapilli with up to 94 wt % juvenile material and calculations indicate a volume of 8.2 × 106 m3 DRE (Dense Rock Equivalent) for Phase 2. A short pause in scoria fallout was observed that coincides with the transition between Phases 2 and 3 of the eruption. On the crater rim there is clear evidence for the different phases, owing to the stratification of the deposits; however, away from the crater, stratigraphic breaks suggesting any discontinuity in the eruptive activity are absent. The beginning of Phase 3 is marked by the appearance of abundant dense scoria fragments, coincident with the coarsest part of the lapilli. High-density scoria forms 10 wt % of juvenile material in Phase 2, increasing to 45% in the upper part of Phase 3. Isopach maps derived from field measurements indicate a mean volume of 40.2 × 106 m3 DRE for Phase 3. Distal ash, mainly formed during Phase 3, was dispersed to the SE as far as Albania, and calculations yield a volume of 102 × 106 m3 DRE. Intermittent activity associated with Phase 4 generated ash-rich plumes dispersed towards the SW and contemporary thickness descriptions yield a bulk volume of 4.2 × 106 m3 (2.5 × 106 m3 DRE). Small pyroclastic density currents (PDCs) were observed during Phases 3 and 4. The deposits (200 m from the crater rim) of these currents have been identified on the flanks of the cone. Thin, massive and poorly sorted ash layers, that occur up to 2.5 km from the crater rim, are interpreted to represent the distal facies of these PDCs. Mass discharge rate (MDR) estimates for the paroxysmal phase (end of Phase 2 and start of Phase 3) of this event are around 3.5 × 106 kg/s, however, this increases to > 107 kg/s if the mass of distal ash is taken into account. Column height estimates from fallout isopleths associated with the eruption's paroxysmal phase are > 10 km. Based on the contemporaneous chronicles, we were able to define the type and extent of damage associated with the different styles (or temporal phases) of the eruption. Our calculations demonstrate that the present-day population at risk has doubled compared to 1944. The contemporaneous (and also subsequent) scientific literature underestimated the magnitude and intensity of this eruption and very little attention has been dedicated to the damage that occurred. We suggest that this is at least partly related to the extensive destruction of Neapolitan area and the deaths of tens of thousands of civilians related to the Second World War.


1999 ◽  
Author(s):  
W.R. Haag ◽  
P. Owens ◽  
D. Mayszak ◽  
J. Katona ◽  
B. Mangilin ◽  
...  

Author(s):  
Cecile De Klein ◽  
Jim Paton ◽  
Stewart Ledgard

Strategic de-stocking in winter is a common management practice on dairy farms in Southland, New Zealand, to protect the soil against pugging damage. This paper examines whether this practice can also be used to reduce nitrate leaching losses. Model analyses and field measurements were used to estimate nitrate leaching losses and pasture production under two strategic de-stocking regimes: 3 months off-farm or 5 months on a feed pad with effluent collected and applied back to the land. The model analyses, based on the results of a long-term farmlet study under conventional grazing and on information for an average New Zealand farm, suggested that the 3- or 5-month de-stocking could reduce nitrate leaching losses by about 20% or 35-50%, respectively compared to a conventional grazing system. Field measurements on the Taieri Plain in Otago support these findings, although the results to date are confounded by drought conditions during the 1998 and 1999 seasons. The average nitrate concentration of the drainage water of a 5-month strategic de-stocking treatment was about 60% lower than under conventional grazing. Pasture production of the 5-month strategic de-stocking regime with effluent return was estimated based on data for apparent N efficiency of excreta patches versus uniformlyspread farm dairy effluent N. The results suggested that a strategic de-stocking regime could increase pasture production by about 2 to 8%. A cost/ benefit analysis of the 5-month de-stocking system using a feed pad, comparing additional capital and operational costs with additional income from a 5% increase in DM production, show a positive return on capital for an average New Zealand dairy farm. This suggests that a strategic destocking system has good potential as a management tool to reduce nitrate leaching losses in nitrate sensitive areas whilst being economically viable, particularly on farms where an effluent application system or a feed pad are already in place. Keywords: dairying, feed pads, nitrate leaching, nitrogen efficiency, productivity, strategic de-stocking


Sign in / Sign up

Export Citation Format

Share Document