scholarly journals UNDERWATER MOUND FOR THE PROTECTION OF DURBAN'S BEACHES

1970 ◽  
Vol 1 (12) ◽  
pp. 62 ◽  
Author(s):  
J.A. Zwaborn ◽  
G.A.W. Fromme ◽  
J.B. FitzPatrick
Keyword(s):  
Settling Velocity ◽  
Scale Effects ◽  
Similarity Criterion ◽  
Test Results ◽  
Beach Profile ◽  
Reasonable Degree ◽  
Model Predictions ◽  
Profile Changes ◽  
High Degree ◽  
Movable Bed

The construction of an underwater mound of sand for the protection and improvement of Durban's beaches has been recommended on the basis of intensive investigations These investigations included prototype measurements of beach changes as related to recorded sea conditions, basic scaling tests in which these beach changes were reproduced to scale in movable bed models and tests of the proposed underwater mound in models, using different scales in order to eliminate possible scale effects The test results showed that, provided the shear-settling velocity similarity criterion is satisfied, beach changes can be reproduced in a movable bed model to a reasonable degree of accuracy Optimum dimensions for the cross section of the mound were determined on the basis of the criterion for erosive and non-erosive wave conditions which was derived from the prototype beach profile changes and confirmed by model tests The resulting dimensions are a mound of sand about 4 5 km long, about 1 200 m offshore, reaching to 7 3 m below LWOST, with side slopes of 1 in 25 and a crest width of 61 m 3 3 Of the total quantity required (8 000 000 m ) some 2 500 000 m of sand, available from harbour dredging works in Durban Bay, had been dumped by May, 1970 Model predictions on mound stability and beach improvements were confirmed to a high degree of accuracy by the full scale events.

scholarly journals BEACH PROFILE CHARACTERISTICS DUE TO THE INCLINED WAVES

1988 ◽  
Vol 1 (21) ◽  
pp. 121
Author(s):  
Tai-Wen Hsu ◽  
Shan-Hwei Ou
Keyword(s):  
Three Dimensional ◽  
Relative Importance ◽  
Wave Steepness ◽  
Beach Profile ◽  
Empirical Relationships ◽  
Profile Changes ◽  
Series Of Experiments ◽  
Wave Angle ◽  
Profile Characteristics ◽  
Movable Bed

The result of a theoretical approach shows that the beach profile characteristics is governed by a modified Iribarren number which includes the effects among the factors of initial beach slope, wave angle and wave steepness. A series of experiments are conducted in a three-dimensional movable bed model on the conditions of two different initial beach slopes, two incident wave angles as well as several erosive wave steepnesses. The relative importance of each factor involved in the parameter is discussed. It is shown that the modified Iribarren number is effective in the analysis, of beach profile characteristics under the action of inclined waves. The empirical relationships between beach profile changes and the modified Iribarren number are proposed on the basis of experimental results.

FROUDE’S LAW OF SIMILITUDE – CONTEMPORARY AND FUTURE SEAKEEPING TESTING

2021 ◽  
Vol 153 (A2) ◽  
Author(s):  
R P Dallinga ◽  
R H M Huijsmans
Keyword(s):  
Model Test ◽  
Scale Effects ◽  
Higher Order ◽  
Air Pressure ◽  
Test Results ◽  
Viscous Effects ◽  
Two Phase ◽  
Scale Models ◽  
Non Linear

Historically “scale effects” in the interpretation of tests with scale models in waves using Froude’s Law of Similitude are mostly associated with viscous effects. Nowadays, with a much more complete modelling of reality and a focus on higher order non-linear phenomena, scaling of model test results implies a wider range of assumptions than the validity of Froude’s Law. Our contribution to the conference is a visionary review of contemporary and future problems in the interpretation of these tests. In this context we will discuss the developments in test techniques, including the development of a new Two-Phase Laboratory facilitating seakeeping and sloshing tests at reduced air pressure.

Compliant Pantographs via the Pseudo-Rigid-Body Model

1998 ◽  
Author(s):  
Andrew J. Nielson ◽  
Larry L. Howell
Keyword(s):  
Rigid Body ◽  
Compliant Mechanisms ◽  
Compliant Mechanism ◽  
Test Results ◽  
Rigid Link ◽  
Body Model ◽  
Design Flexibility ◽  
Model Predictions ◽  
Rigid Body Model ◽  
Classical Mechanism

Abstract This paper uses a familiar classical mechanism, the pantograph, to demonstrate the utility of the pseudo-rigid-body model in the design of compliant mechanisms to replace rigid-link mechanisms, and to illustrate the advantages and limitations of the resulting compliant mechanisms. To demonstrate the increase in design flexibility, three different compliant mechanism configurations were developed for a single corresponding rigid-link mechanism. The rigid-link pantograph consisted of six links and seven joints, while the corresponding compliant mechanisms had no more than two links and three joints (a reduction of at least four links and four joints). A fourth compliant pantograph, corresponding to a rhomboid pantograph, was also designed and tested. The test results showed that the pseudo-rigid-body model predictions were accurate over a large range, and the mechanisms had displacement characteristics of rigid-link mechanisms in that range. The limitations of the compliant mechanisms included reduced range compared to their rigid-link counterparts. Also, the force-deflection characteristics were predicted by the pseudo-rigid-body model, but they did not resemble those for a rigid-link pantograph because of the energy storage in the flexible segments.

Modeling beach profile changes by typhoon impacts at Xiamen coast

2018 ◽  
Vol 95 (3) ◽  
pp. 783-804
Author(s):  
Kai Yin ◽  
Sudong Xu ◽  
Wenrui Huang ◽  
Rui Li ◽  
Hong Xiao
Keyword(s):  
Beach Profile ◽  
Profile Changes

scholarly journals Physical Modeling of the Controlled Water-Flowing Fracture Development during Short-Wall Block Backfill Mining

Lithosphere ◽  
2021 ◽  
Vol 2021 (Special 4) ◽  
Author(s):  
Yun Zhang ◽  
Yongzi Liu ◽  
Xingping Lai ◽  
Jianming Gao
Keyword(s):  
Coal Pillar ◽  
Similarity Criterion ◽  
Test Results ◽  
Control Effect ◽  
Physical Similarity ◽  
Wall Block ◽  
Fracture Development ◽  
Backfill Mining ◽  
Backfill Materials ◽  
Overlying Strata

Abstract Short-wall block backfill mining (SBBM) technology is an effective method to solve the environmental problems in the mining process. Based on the technical characteristics of SBBM technology and the physical similarity criterion, the physical similarity models for comparing the control effects of water-flowing fracture (WFF) development using short-wall block cave mining (SBCM) and SBBM were established, and the deformation and the WFF development of overlying strata above gob were monitored. The test results determined that the composite materials of 5 mm thick pearl sponge+5 mm thick sponge+10 mm thick paper+6 mm thick board were adopted as the similar backfill materials by comparing the stress-strain curves between the similar backfill materials and the original gangue sample. When the backfilling body was filled into the gob, it would be the permanent bearing body, which bore the load of the overlying strata accompanied with the protective coal pillar. At the same time, the backfilling body also filled the collapse space of overlying strata, which was equivalent to reduce the mining height, and effectively reduced the subsidence and failure height of the overlying strata. Compared with SBCM, the test results showed that the maximum vertical deformation, the height of water-flowing fractured zone, and activity range of overlying strata using SBBM were reduced by 91.4%, 82.5%, and 64.9%, respectively. SBBM had a significant control effect on strata damage and WFF development, which could realize the purpose of water resource protection in coal mines.

scholarly journals EXPERIMENTS ON BEACH PROFILE CHANGE WITH A LARGE WAVE FLUME

1982 ◽  
Vol 1 (18) ◽  
pp. 85 ◽  
Author(s):  
Ryoichi Kajima ◽  
Takao Shimizu ◽  
Kohki Maruyama ◽  
Shozo Saito
Keyword(s):  
Simple Model ◽  
Transport Rate ◽  
Sand Transport ◽  
Two Dimensional ◽  
Beach Profile ◽  
Large Wave ◽  
Wave Flume ◽  
Grain Sizes ◽  
Profile Changes ◽  
Profile Change

Two-dimensional beach profile changes were investigated with a newly constructed prototype-scale wave flume. The flume is 205 m long, 3.4 m wide and 6 m deep. Sand of two grain sizes was used in the experiments. Analysis of the results was made through use of the parameter C, introduced by Sunamura and Horikawa (1974) to classify beaches as either erosional and accretionary. Beach profile changes obtained in the flume were similar to those in the prototype (field). Net sand transport rate distributions were classified into five types, two of which do not seem to have been observed in laboratory (smallscale) experiments. A simple model describing the five types was developed for evaluating two-dimensional beach profile changes.

scholarly journals FRAMEWORK OF AN AMBIDEXTROUS PROCESS OF IDEA MANAGEMENT SUPPORTING THE DOWNSTREAM PRODUCT DEVELOPMENT PROCESS

2020 ◽  
Vol 1 ◽  
pp. 587-596
Author(s):  
T. Herrmann ◽  
D. Roth ◽  
H. Binz
Keyword(s):  
Design Process ◽  
Process Model ◽  
Development Process ◽  
Product Development Process ◽  
Test Results ◽  
Initial Test ◽  
Front End ◽  
High Degree ◽  
Idea Management ◽  
Radical Ideas

AbstractOne challenge within idea management of the front end of the design process is the handling of radical ideas, meaning ideas with a high degree of novelty. Companies are approaching radical and incremental ideas frequently with the same methods, although many reasoned claims exists for treating ideas differently according to the degree of novelty. The paper aims to address the fact that ambidexterity does not play any specific role in the front end. Therefore, a framework of an extended idea process model based on the idea of ambidexterity is shown and initial test results are presented.

scholarly journals Beach Profile Changes Due to Low Crested Breakwaters at Sigandu Beach, Central Java

2015 ◽  
Vol 116 ◽  
pp. 510-519 ◽  
Author(s):  
Dede M. Sulaiman ◽  
Huda Bachtiar ◽  
Ahmad Taufiq ◽  
Hermanto
Keyword(s):  
Beach Profile ◽  
Central Java ◽  
Profile Changes
Sign in / Sign up

Export Citation Format

Share Document