scholarly journals CLOSELY SPACED PILE BREAKWATER AS A PROTECTION STRUCTURE AGAINST BEACH EROSION

1968 ◽  
Vol 1 (11) ◽  
pp. 39 ◽  
Author(s):  
Taizo Hayashi ◽  
Masataro Hattori ◽  
Masujiro Shirai

The theory for the transmission and reflection of the waves at the closely spaced pile breakwater has been developed by the use of shallow water wave theory of small amplitude. Experiment on the hydraulic characteristics of the breakwater has been performed in a two dimensional wave flume. The agreement between the theory and the experiment is pretty good with respect to the coefficients of transmission and reflection of waves, and also to the shoreward velocity of the jet discharged from a space between any two adjacent piles. Experiment was also made on the local scouring at the foot of the clocely spaced pile breakwater. The maximrai scouring depth at the foot of the breakwater relates closely to the ratio of the velocity of the jet to the mean fall velocity of bed material. The relation between the maximum scouring depth and the power of the jet is discussed.

2017 ◽  
Vol 5 (2) ◽  
pp. 123-140
Author(s):  
Badhan Saha ◽  
Mazharul Islam ◽  
Abu Torab ◽  
Dewan Hasan Ahmed

Wave energy is the most available energy associated in deep water seas and oceans. Therefore, many attempts have been applied to capture these energies. This paper describes the design, construction and testing of water wave flume. The water wave flume contains an electromechanically driven rotor type wave maker to generate water wave powers. The waves are constructed by different sizes and arrangements of blades which are connected to the rotor. The rotor is driven by an ac motor to generate wave. At the end of the tank a force measuring device is attached opposite to the rotor to measure the thrust of the wave. Experimental results are validated with available literature and wave theory. The results also show that the width of the blade play major role in generating wave sizes including frequency, amplitude and the power. Wider blade displaces much water to generate wave but reduces the blade speed.


2017 ◽  
Vol 1 (2) ◽  
pp. 34
Author(s):  
Zulkarnain Zulkarnain ◽  
Nadjadji Anwar

The Research Center and Development of Water (Puslitbang) is currently developing the Submerged Breakwater in shallow sea area (PEGAR). The author is interested to examine the material that easily obtained in the field of RCP concrete cylinder. The observation is how it to be ability in function as submerged breakwater an go green and low cost. The physical model of wave transmission test is how the response to the structure in ability to damping of wave as the breakwater function. In this research breakwater used is submerged breakwater type by using concrete cylinder (buis beton). The purpose from this research is to know how the response of breakwater structure to the waves through it, with some variation of the structure by creating a structure with three variations of the arrangement and freeboard that is the relative depth with the crest width is constant. The wave generated test in this study is using regular waves in wave flume at FTSP Civil Engineering Department of Institute Technology Ten November. From the analysis of the effect of the installation of submerged breakwater by using concrete cylinder to the wave damping value, it can be concluded that the factors that are very influential is the freeboard and the composition of concrete cylinder. Scenario A (rigid vertical massive) is capable of producing the smallest value of kt is 0.33. As for scenario B (rigid horyzontal massive) with a damping value of 0.5, while the scenario C (rigid permeable) is only able to produce kt value of 0.71. Scenario A is better than scenario B and C Because the position of arrangement of A is very good used to damp wave in small or big freeboard conditions.


Water Waves ◽  
2021 ◽  
Author(s):  
Maria Bjørnestad ◽  
Henrik Kalisch ◽  
Malek Abid ◽  
Christian Kharif ◽  
Mats Brun

AbstractIt is well known that weak hydraulic jumps and bores develop a growing number of surface oscillations behind the bore front. Defining the bore strength as the ratio of the head of the undular bore to the undisturbed depth, it was found in the classic work of Favre (Ondes de Translation. Dunod, Paris, 1935) that the regime of laminar flow is demarcated from the regime of partially turbulent flows by a sharply defined value 0.281. This critical bore strength is characterized by the eventual breaking of the leading wave of the bore front. Compared to the flow depth in the wave flume, the waves developing behind the bore front are long and of small amplitude, and it can be shown that the situation can be described approximately using the well known Kortweg–de Vries equation. In the present contribution, it is shown that if a shear flow is incorporated into the KdV equation, and a kinematic breaking criterion is used to test whether the waves are spilling, then the critical bore strength can be found theoretically within an error of less than ten percent.


2015 ◽  
Vol 28 (23) ◽  
pp. 9332-9349 ◽  
Author(s):  
Liang Wu ◽  
Zhiping Wen ◽  
Renguang Wu

Abstract Part I of this study examined the modulation of the monsoon trough (MT) on tropical depression (TD)-type–mixed Rossby–gravity (MRG) and equatorial Rossby (ER) waves over the western North Pacific based on observations. This part investigates the interaction of these waves with the MT through a diagnostics of energy conversion that separates the effect of the MT on TD–MRG and ER waves. It is found that the barotropic conversion associated with the MT is the most important mechanism for the growth of eddy energy in both TD–MRG and ER waves. The large rotational flows help to maintain the rapid growth and tilted horizontal structure of the lower-tropospheric waves through a positive feedback between the wave growth and horizontal structure. The baroclinic conversion process associated with the MT contributes a smaller part for TD–MRG waves, but is of importance comparable to barotropic conversion for ER waves as it can produce the tilted vertical structure. The growth rates of the waves are much larger during strong MT years than during weak MT years. Numerical experiments are conducted for an idealized MRG or ER wave using a linear shallow-water model. The results confirm that the monsoon background flow can lead to an MRG-to-TD transition and the ER wave amplifies along the axis of the MT and is more active in the strong MT state. Those results are consistent with the findings in Part I. This indicates that the mean flow of the MT provides a favorable background condition for the development of the waves and acts as a key energy source.


1957 ◽  
Vol 1 (02) ◽  
pp. 27-55
Author(s):  
John P. Breslin

It is demonstrated in this paper2 that the deepwater wave drag of a hydrofoil of finite span can be found directly from the theory developed largely for ship hydrodynamics by Havelock and others. The wave drag is then studied at high Froude numbers and from the observed behavior the induced drag of the hydrofoil can be deduced from existing aerodynamic formulas. Evaluation of the resulting formulas is effected for two arbitrary load distributions and a comparison with some model test results is made. A practical approximation which gives the influence of gravity over a range of high Froude numbers is found and from this one can deduce a Froude number beyond which the effects of gravity may be ignored. It is also shown that an expression for the waves at some distance aft of the hydrofoil can be deduced from the general formulas developed for ship hydrodynamics. A discussion of the wave pattern is given with particular emphasis on the centerline profile at high Froude numbers and a contrast is pointed out in regard to the results of the two-dimensional theory for the hydrofoil waves and wave resistance.


1978 ◽  
Vol 22 (04) ◽  
pp. 203-211
Author(s):  
Nils Salvesen ◽  
C. von Kerczek

Some nonlinear aspects of the two-dimensional problem of a submerged body moving with constant speed in otherwise undisturbed water of uniform depth are considered. It is shown that a theory of Benjamin which predicts a uniform rise of the free surface ahead of the body and the lowering of the mean level of the waves behind it agrees well with experimental data. The local steady-flow problem is solved by a numerical method which satisfies the exact free-surface conditions. Third-order perturbation formulas for the downstream free waves are also presented. It is found that in sufficiently shallow water, the wavelength increases with increasing disturbance strength for fixed values of the free-stream-Froude number. This is opposite to the deepwater case where the wavelength decreases with increasing disturbance strength.


In this paper and in part II, we give the theory of a distinctive type of wave motion, which arises in any one-dimensional flow problem when there is an approximate functional relation at each point between the flow q (quantity passing a given point in unit time) and concentration k (quantity per unit distance). The wave property then follows directly from the equation of continuity satisfied by q and k . In view of this, these waves are described as ‘kinematic’, as distinct from the classical wave motions, which depend also on Newton’s second law of motion and are therefore called ‘dynamic’. Kinematic waves travel with the velocity dq/dk , and the flow q remains constant on each kinematic wave. Since the velocity of propagation of each wave depends upon the value of q carried by it, successive waves may coalesce to form ‘kinematic shock waves ’. From the point of view of kinematic wave theory, there is a discontinuous increase in q at a shock, but in reality a shock wave is a relatively narrow region in which (owing to the rapid increase of q ) terms neglected by the flow concentration relation become important. The general properties of kinematic waves and shock waves are discussed in detail in §1. One example included in §1 is the interpretation of the group-velocity phenomenon in a dispersive medium as a particular case of the kinematic wave phenomenon. The remainder of part I is devoted to a detailed treatment of flood movement in long rivers, a problem in which kinematic waves play the leading role although dynamic waves (in this case, the long gravity waves) also appear. First (§2), we consider the variety of factors which can influence the approximate flow-concentration relation, and survey the various formulae which have been used in attempts to describe it. Then follows a more mathematical section (§3) in which the role of the dynamic waves is clarified. From the full equations of motion for an idealized problem it is shown that at the ‘Froude numbers’ appropriate to flood waves, the dynamic waves are rapidly attenuated and the main disturbance is carried downstream by the kinematic waves; some account is then given of the behaviour of the flow at higher Froude numbers. Also in §3, the full equations of motion are used to investigate the structure of the kinematic shock; for this problem, the shock is the ‘monoclinal flood wave’ which is well known in the literature of this subject. The final sections (§§4 and 5) contain the application of the theory of kinematic waves to the determination of flood movement. In §4 it is shown how the waves (including shock waves) travelling downstream from an observation point may be deduced from a knowledge of the variation with time of the flow at the observation point; this section then concludes with a brief account of the effect on the waves of tributaries and run-off. In §5, the modifications (similar to diffusion effects) which arise due to the slight dependence of the flow-concentration curve on the rate of change of flow or concentration, are described and methods for their inclusion in the theory are given.


2012 ◽  
Vol 34 (2) ◽  
pp. 41-50
Author(s):  
Adam Krupiński

Abstract The experiment described was one of the elements of research into sediment transport conducted by the Division of Geotechnics of West-Pomeranian University of Technology. The experimental analyses were performed within the framework of the project “Building a knowledge transfer network on the directions and perspectives of developing wave laboratory and in situ research using innovative research equipment” launched by the Institute of Hydroengineering of the Polish Academy of Sciences in Gdańsk. The objective of the experiment was to determine relations between sediment transport and wave motion parameters and then use the obtained results to modify formulas defining sediment transport in rivers, like Ackers-White formula, by introducing basic parameters of wave motion as the force generating bed material transport. The article presents selected results of the experiment concerning sediment velocity field analysis conducted for different parameters of wave motion. The velocity vectors of particles suspended in water were measured with a Particle Image Velocimetry (PIV) apparatus registering suspended particles in a measurement flume by producing a series of laser pulses and analysing their displacement with a high-sensitivity camera connected to a computer. The article presents velocity fields of suspended bed material particles measured in the longitudinal section of the wave flume and their comparison with water velocity profiles calculated for the definite wave parameters. The results presented will be used in further research for relating parameters essential for the description of monochromatic wave motion to basic sediment transport parameters and „transforming” mean velocity and dynamic velocity in steady motion to mean wave front velocity and dynamic velocity in wave motion for a single wave.


2011 ◽  
Vol 681 ◽  
pp. 462-498 ◽  
Author(s):  
DAN LIBERZON ◽  
LEV SHEMER

Despite a significant progress and numerous publications over the last few decades a comprehensive understanding of the process of waves' excitation by wind still has not been achieved. The main goal of the present work was to provide as comprehensive as possible set of experimental data that can be quantitatively compared with theoretical models. Measurements at various air flow rates and at numerous fetches were carried out in a small scale, closed-loop, 5 m long wind wave flume. Mean airflow velocity and fluctuations of the static pressure were measured at 38 vertical locations above the mean water surface simultaneously with determination of instantaneous water surface elevations by wave gauges. Instantaneous fluctuations of two velocity components were recorded for all vertical locations at a single fetch. The water surface drift velocity was determined by the particle tracking velocimetry (PTV) method. Evaluation of spatial growth rates of waves at various frequencies was performed using wave gauge records at various fetches. Phase relations between various signals were established by cross-spectral analysis. Waves' celerities and pressure fluctuation phase lags relative to the surface elevation were determined. Pressure values at the water surface were determined by extrapolating the measured vertical profile of pressure fluctuations to the mean water level and used to calculate the form drag and consequently the energy transfer rates from wind to waves. Directly obtained spatial growth rates were compared with those obtained from energy transfer calculations, as well as with previously available data.


2003 ◽  
Vol 125 (2) ◽  
pp. 94-102 ◽  
Author(s):  
Svein Helge Gjøsund

It has proven difficult to describe the kinematics in irregular waves satisfactorily, in particular for the surface zone in broad-banded waves. A Lagrangian approach offers distinct advantages in this respect, eliminating the need for extrapolation of solutions or “stretching” of coordinates. This paper presents a model of irregular waves based on superposition of linear Lagrangian wave components, using an iterative method to obtain the Eulerian solution. This approach yields theoretically consistent results everywhere in the waves, and comparisons with wave flume measurements show good agreement. Also, the linear Lagrangian model includes wave interactions that would be nonlinear in an Eulerian formulation.


Sign in / Sign up

Export Citation Format

Share Document