New approaches to zoology: Plenary 1

2020 ◽  
Vol 40 (3) ◽  
pp. 404-406
Keyword(s):  
Plenary Session ◽  
Large Scale ◽  
Radio Telemetry ◽  
Low Cost ◽  
Camera Trapping ◽  
Primary Industry ◽  
New Approaches ◽  
University Of Technology ◽  
Question And Answer ◽  
First Session

Following the first session of the forum, we held a question and answer session facilitated by Paul Willis. The presentations covered by this plenary session were: Unravelling the secret behaviour of animals using animal-borne camera (Catherine Herbert et al. Sydney University)Large-scale, low-cost monitoring of animal spatial movements: Motus and an automated radio-telemetry grid for Australian zoology (Andrea Griffin et al. Newcastle University)Camera trapping advances: into the new millennia (Paul Meek et al. NSW Dept of Primary Industry)Sound recorders and soundscapes (Paul Roe Queensland University of Technology)

New approaches to zoology: Plenary 2

2020 ◽  
Vol 40 (3) ◽  
pp. 433-437
Keyword(s):  
Citizen Science ◽  
Plenary Session ◽  
Aerial Surveillance ◽  
Breeding Bird ◽  
New Approaches ◽  
The Future ◽  
Question And Answer ◽  
Bird Colonies

Following the second session of the forum, we held a question and answer session facilitated by Paul Willis. The presentations covered by this plenary session were: Back to the future: Aerial surveillance from ‘blimps’ for ecology and conservation (Kye Adams et al. University of Wollongong) Using drones to monitor large and complex breeding bird colonies (Mitchell Lyons, University of NSW) Sniffing solutions to enhance koala conservation (Romane Cristescu et al. University of the Sunshine Coast) Collect, connect, upscale: revolutionising the uptake of citizen science in bird research and conservation (Micha Jackson, University of Queensland).

New approaches to zoology: Plenary 4

2020 ◽  
Vol 40 (3) ◽  
pp. 510-513
Keyword(s):  
Genetic Analysis ◽  
Plenary Session ◽  
Tasmanian Devil ◽  
Australian Museum ◽  
New Approaches ◽  
Question And Answer ◽  
Mammal Conservation ◽  
Fourth Session

Following the fourth session of the forum, we held a question and answer session facilitated by Paul Willis. The presentations covered by this plenary session were: What can we do with poo: genetic analysis of scat samples to inform the conversation Tasmanian Devil? (Catherine Grueber et al. University of Sydney)Probing the sex life of the dragon. (Arthur Georges, University of Canberra)Secrets from beyond extinction; unlocking the thylacine genome. (Andrew Pask, University of Melbourne)The Oz Mammals genomics initiative: developing resources for mammal conservation. (Mark Eldridge et al. Australian Museum)

An Assessment of a Low-Cost Wastewater Disposal System after Twenty-Five Years of Operation

1987 ◽  
Vol 19 (5-6) ◽  
pp. 701-710 ◽  
Author(s):  
B. L. Reidy ◽  
G. W. Samson
Keyword(s):  
Large Scale ◽  
Low Cost ◽  
Wastewater Disposal ◽  
Industrial Base ◽  
Industrial Wastewaters ◽  
The Past ◽  
Gasification Process ◽  
Appropriate Treatment ◽  
Environmentally Safe ◽  
Coal Resource

A low-cost wastewater disposal system was commissioned in 1959 to treat domestic and industrial wastewaters generated in the Latrobe River valley in the province of Gippsland, within the State of Victoria, Australia (Figure 1). The Latrobe Valley is the centre for large-scale generation of electricity and for the production of pulp and paper. In addition other industries have utilized the brown coal resource of the region e.g. gasification process and char production. Consequently, industrial wastewaters have been dominant in the disposal system for the past twenty-five years. The mixed industrial-domestic wastewaters were to be transported some eighty kilometres to be treated and disposed of by irrigation to land. Several important lessons have been learnt during twenty-five years of operating this system. Firstly the composition of the mixed waste stream has varied significantly with the passage of time and the development of the industrial base in the Valley, so that what was appropriate treatment in 1959 is not necessarily acceptable in 1985. Secondly the magnitude of adverse environmental impacts engendered by this low-cost disposal procedure was not imagined when the proposal was implemented. As a consequence, clean-up procedures which could remedy the adverse effects of twenty-five years of impact are likely to be costly. The question then may be asked - when the total costs including rehabilitation are considered, is there really a low-cost solution for environmentally safe disposal of complex wastewater streams?

scholarly journals Rapid, large-scale species discovery in hyperdiverse taxa using 1D MinION sequencing

BMC Biology ◽  
2019 ◽  
Vol 17 (1) ◽  
Author(s):  
Amrita Srivathsan ◽  
Emily Hartop ◽  
Jayanthi Puniamoorthy ◽  
Wan Ting Lee ◽  
Sujatha Narayanan Kutty ◽  
...  
Keyword(s):  
Dna Sequences ◽  
Large Scale ◽  
Low Cost ◽  
Small Body ◽  
Small Subset ◽  
Similar Species ◽  
Large Species ◽  
Morphological Examination ◽  
Species Discovery ◽  
Short Period

Abstract Background More than 80% of all animal species remain unknown to science. Most of these species live in the tropics and belong to animal taxa that combine small body size with high specimen abundance and large species richness. For such clades, using morphology for species discovery is slow because large numbers of specimens must be sorted based on detailed microscopic investigations. Fortunately, species discovery could be greatly accelerated if DNA sequences could be used for sorting specimens to species. Morphological verification of such “molecular operational taxonomic units” (mOTUs) could then be based on dissection of a small subset of specimens. However, this approach requires cost-effective and low-tech DNA barcoding techniques because well-equipped, well-funded molecular laboratories are not readily available in many biodiverse countries. Results We here document how MinION sequencing can be used for large-scale species discovery in a specimen- and species-rich taxon like the hyperdiverse fly family Phoridae (Diptera). We sequenced 7059 specimens collected in a single Malaise trap in Kibale National Park, Uganda, over the short period of 8 weeks. We discovered > 650 species which exceeds the number of phorid species currently described for the entire Afrotropical region. The barcodes were obtained using an improved low-cost MinION pipeline that increased the barcoding capacity sevenfold from 500 to 3500 barcodes per flowcell. This was achieved by adopting 1D sequencing, resequencing weak amplicons on a used flowcell, and improving demultiplexing. Comparison with Illumina data revealed that the MinION barcodes were very accurate (99.99% accuracy, 0.46% Ns) and thus yielded very similar species units (match ratio 0.991). Morphological examination of 100 mOTUs also confirmed good congruence with morphology (93% of mOTUs; > 99% of specimens) and revealed that 90% of the putative species belong to the neglected, megadiverse genus Megaselia. We demonstrate for one Megaselia species how the molecular data can guide the description of a new species (Megaselia sepsioides sp. nov.). Conclusions We document that one field site in Africa can be home to an estimated 1000 species of phorids and speculate that the Afrotropical diversity could exceed 200,000 species. We furthermore conclude that low-cost MinION sequencers are very suitable for reliable, rapid, and large-scale species discovery in hyperdiverse taxa. MinION sequencing could quickly reveal the extent of the unknown diversity and is especially suitable for biodiverse countries with limited access to capital-intensive sequencing facilities.

scholarly journals Synthesis of Polyaniline Coating on the Modified Fiber Ball and Application for Cr(VI) Removal

2021 ◽  
Vol 16 (1) ◽  
Author(s):  
Xiao Li Ma ◽  
Guang Tao Fei ◽  
Shao Hui Xu
Keyword(s):  
Waste Water ◽  
Large Scale ◽  
Ph Value ◽  
Low Cost ◽  
Strong Acid ◽  
Removal Capacity ◽  
Secondary Pollution ◽  
Potential Possibility ◽  
Fiber Ball ◽  
Maximum Removal

Abstract In this study, polyaniline (PANI) is prepared by means of chemical oxidization polymerization and directly loaded on the modified fiber ball (m-FB) to obtain macroscale polyaniline/modified fiber ball (PANI/m-FB) composite, and then its removal ability of Cr(VI) is investigated. The effects of different parameters such as contact time, pH value and initial concentration on Cr(VI) removal efficiency are discussed. The experimental results illustrate that the favorable pH value is 5.0 and the maximum removal capacity is measured to be 293.13 mg g−1. Besides, PANI/m-FB composites can be regenerated and reused after being treated with strong acid. The kinetic study indicates that the adsorption procedure is mainly controlled by chemical adsorption. More importantly, the macroscale of composites can avoid secondary pollution efficiently. Benefiting from the low cost, easy preparation in large scale, environmentally friendly, excellent recycling performance as well as high removal ability, PANI/m-FB composites exhibit a potential possibility to remove Cr(VI) from industrial waste water. Graphic Abstract The polyaniline (PANI) was coated on modified fiber ball (m-FB) to remove Cr(VI) in waste water, and this kind of PANI/m-FB composites can avoid secondary pollution efficiently due to its macrostructure. Furthermore, the removal capacity can reach to 291.13 mg/g and can be multiple reused.

scholarly journals Effects of Ag contents on the microstructure and SERS performance of self-grown Ag nanoparticles/Mo–Ag alloy films

2020 ◽  
Vol 9 (1) ◽  
pp. 751-759 ◽  
Author(s):  
Xinxin Lian ◽  
Yuanjiang Lv ◽  
Haoliang Sun ◽  
David Hui ◽  
Guangxin Wang
Keyword(s):  
Ag Nanoparticles ◽  
Large Scale ◽  
Low Cost ◽  
Film Surface ◽  
Time Domain Analysis ◽  
Alloy Film ◽  
Scale Production ◽  
Alloy Films ◽  
Surface Enhanced Raman ◽  
Ag Film

AbstractAg nanoparticles/Mo–Ag alloy films with different Ag contents were prepared on polyimide by magnetron sputtering. The effects of Ag contents on the microstructure of self-grown Ag nanoparticles/Mo–Ag alloy films were investigated using XRD, FESEM, EDS and TEM. The Ag content plays an important role in the size and number of uniformly distributed Ag nanoparticles spontaneously formed on the Mo–Ag alloy film surface, and the morphology of the self-grown Ag nanoparticles has changed significantly. Additionally, it is worth noting that the Ag nanoparticles/Mo–Ag alloy films covered by a thin Ag film exhibits highly sensitive surface-enhanced Raman scattering (SERS) performance. The electric field distributions were calculated using finite-difference time-domain analysis to further prove that the SERS enhancement of the films is mainly determined by “hot spots” in the interparticle gap between Ag nanoparticles. The detection limit of the Ag film/Ag nanoparticles/Mo–Ag alloy film for Rhodamine 6G probe molecules was 5 × 10−14 mol/L. Therefore, the novel type of the Ag film/Ag nanoparticles/Mo–Ag alloy film can be used as an ideal SERS-active substrate for low-cost and large-scale production.

SateLoc: A Virtual Fingerprinting Approach to Outdoor LoRa Localization Using Satellite Images

2021 ◽  
Vol 17 (4) ◽  
pp. 1-28
Author(s):  
Yuxiang Lin ◽  
Wei Dong ◽  
Yi Gao ◽  
Tao Gu
Keyword(s):  
Land Cover ◽  
Large Scale ◽  
Satellite Images ◽  
Low Cost ◽  
Tracking Error ◽  
Location Based Services ◽  
Distance Constraint ◽  
Combination Strategy ◽  
Land Cover Types ◽  
High Resolution Satellite Images

With the increasing relevance of the Internet of Things and large-scale location-based services, LoRa localization has been attractive due to its low-cost, low-power, and long-range properties. However, existing localization approaches based on received signal strength indicators are either easily affected by signal fading of different land-cover types or labor intensive. In this work, we propose SateLoc, a LoRa localization system that utilizes satellite images to generate virtual fingerprints. Specifically, SateLoc first uses high-resolution satellite images to identify land-cover types. With the path loss parameters of each land-cover type, SateLoc can automatically generate a virtual fingerprinting map for each gateway. We then propose a novel multi-gateway combination strategy, which is weighted by the environmental interference of each gateway, to produce a joint likelihood distribution for localization and tracking. We implement SateLoc with commercial LoRa devices without any hardware modification, and evaluate its performance in a 227,500-m urban area. Experimental results show that SateLoc achieves a median localization error of 43.5 m, improving more than 50% compared to state-of-the-art model-based approaches. Moreover, SateLoc can achieve a median tracking error of 37.9 m with the distance constraint of adjacent estimated locations. More importantly, compared to fingerprinting-based approaches, SateLoc does not require the labor-intensive fingerprint acquisition process.

scholarly journals Comparative Analysis of Digital Models of Objects of Cultural Heritage Obtained by the “3D SLS” and “SfM” Methods

2021 ◽  
Vol 11 (12) ◽  
pp. 5321
Author(s):  
Marcin Barszcz ◽  
Jerzy Montusiewicz ◽  
Magdalena Paśnikowska-Łukaszuk ◽  
Anna Sałamacha
Keyword(s):  
Cultural Heritage ◽  
Low Cost ◽  
Three Dimensional ◽  
3D Models ◽  
Silk Road ◽  
Digital Models ◽  
Global Pandemic ◽  
University Of Technology ◽  
Three Dimensional Models ◽  
3D Digitisation

In the era of the global pandemic caused by the COVID-19 virus, 3D digitisation of selected museum artefacts is becoming more and more frequent practice, but the vast majority is performed by specialised teams. The paper presents the results of comparative studies of 3D digital models of the same museum artefacts from the Silk Road area generated by two completely different technologies: Structure from Motion (SfM)—a method belonging to the so-called low-cost technologies—and by Structured-light 3D Scanning (3D SLS). Moreover, procedural differences in data acquisition and their processing to generate three-dimensional models are presented. Models built using a point cloud were created from data collected in the Afrasiyab museum in Samarkand (Uzbekistan) during “The 1st Scientific Expedition of the Lublin University of Technology to Central Asia” in 2017. Photos for creating 3D models in SfM technology were taken during a virtual expedition carried out under the “3D Digital Silk Road” program in 2021. The obtained results show that the quality of the 3D models generated with SfM differs from the models from the technology (3D SLS), but they may be placed in the galleries of the vitrual museum. The obtained models from SfM do not have information about their size, which means that they are not fully suitable for archiving purposes of cultural heritage, unlike the models from SLS.

scholarly journals Extraction of short chain chitooligosaccharides from fungal biomass and their use as promoters of arbuscular mycorrhizal symbiosis

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Andrea Crosino ◽  
Elisa Moscato ◽  
Marco Blangetti ◽  
Gennaro Carotenuto ◽  
Federica Spina ◽  
...  
Keyword(s):  
Fungal Biomass ◽  
Large Scale ◽  
Low Cost ◽  
Trichoderma Viride ◽  
Arbuscular Mycorrhizal ◽  
Am Fungi ◽  
Production Costs ◽  
Short Chain ◽  
Mycorrhizal Symbiosis ◽  
Major Interest

AbstractShort chain chitooligosaccharides (COs) are chitin derivative molecules involved in plant-fungus signaling during arbuscular mycorrhizal (AM) interactions. In host plants, COs activate a symbiotic signalling pathway that regulates AM-related gene expression. Furthermore, exogenous CO application was shown to promote AM establishment, with a major interest for agricultural applications of AM fungi as biofertilizers. Currently, the main source of commercial COs is from the shrimp processing industry, but purification costs and environmental concerns limit the convenience of this approach. In an attempt to find a low cost and low impact alternative, this work aimed to isolate, characterize and test the bioactivity of COs from selected strains of phylogenetically distant filamentous fungi: Pleurotus ostreatus, Cunninghamella bertholletiae and Trichoderma viride. Our optimized protocol successfully isolated short chain COs from lyophilized fungal biomass. Fungal COs were more acetylated and displayed a higher biological activity compared to shrimp-derived COs, a feature that—alongside low production costs—opens promising perspectives for the large scale use of COs in agriculture.

Sign in / Sign up

Export Citation Format

Share Document