scholarly journals Acoustic individuality in the hissing calls of the male black grouse (Lyrurus tetrix)

PeerJ ◽  
2021 ◽  
Vol 9 ◽  
pp. e11837
Author(s):  
Lucie Hambálková ◽  
Richard Policht ◽  
Jiří Horák ◽  
Vlastimil Hart
Keyword(s):  
Individual Variation ◽  
Low Frequency ◽  
Black Grouse ◽  
Monitoring Methods ◽  
Long Distance ◽  
Mating Partner ◽  
Vocal Individuality ◽  
Discrimination Model ◽  
Hissing Sound ◽  
Competitor Recognition

Acoustic individuality may well play a big role during the mating season of many birds. Black grouse (Lyrurus tetrix) produces two different long-distance calls during mating on leks: rookooing and hissing calls. The first one represents low frequency series of bubbling sounds and the second one represents hissing sound. This hissing represents a signal not produced by the syrinx. We analyzed 426 hissing calls from 24 individuals in Finland and Scotland. We conducted cross-validated discrimination analyses (DFA). The discrimination model classified each call with almost 78% accuracy (conventional result) and the validated DFA revealed 71% output, that is much higher than classification by chance (4%). The most important variables were Frequency 95%, 1st Quartile Frequency, Aggregate Entropy and Duration 90%. We also tested whether between individual variation is higher than within individual variation using PIC (Potential for individual coding) and we found that all acoustic parameters had PIC > 1. We confirmed that hissing call of black grouse is individually distinct. In comparison to the signals produced by the syrinx, non-vocal sounds have been studied rarely and according to our knowledge, this is the second evidence of vocal individuality in avian hissing sounds which are not produced by syrinx. Individuality in the vocalization of the male black grouse may aid females in mating partner selection, and for males it may enable competitor recognition and assessment. Individually distinct hissing calls could be of possible use to monitor individuals on leks. Such a method could overcome problems during traditional monitoring methods of this species, when one individual can be counted multiple times, because catching and traditional marking is problematic in this species.

scholarly journals Variation of Low-Frequency Time-Code Signal Field Strength during the Annular Solar Eclipse on 21 June 2020: Observation and Analysis

Sensors ◽  
2021 ◽  
Vol 21 (4) ◽  
pp. 1216
Author(s):  
Xin Wang ◽  
Bo Li ◽  
Fan Zhao ◽  
Xinyu Luo ◽  
Luxi Huang ◽  
...  
Keyword(s):  
Field Strength ◽  
Solar Eclipse ◽  
Low Frequency ◽  
Signal Propagation ◽  
Normal Operation ◽  
Time Code ◽  
Long Distance ◽  
Time Service ◽  
Annular Solar Eclipse ◽  
Signal Field

Due to the occlusion of the moon, an annular solar eclipse will have an effect on the ionosphere above the earth. The change of the ionosphere, for the low-frequency time-code signal that relies on it as a reflection medium for long-distance propagation, the signal field strength, and other parameters will also produce corresponding changes, which will affect the normal operation of the low-frequency time-code time service system. This paper selects the solar eclipse that occurred in China on 21 June 2020, and uses the existing measurement equipment to carry out experimental research on the low-frequency time-code signal. We measured and analyzed the signal field strength from 20 June 2020 to 23 June 2020, and combined solar activity data, ionospheric data, and geomagnetic data, and attempted to explore the reasons and rules of the change of signal parameters. The results showed that the field strength of the low-frequency time-code signal changed dramatically within a short time period, the max growth value can reach up to 17 dBμV/m and the variation trend yielded ‘three mutations’. This change in signal field strength is probably due to the occurrence of a solar eclipse that has an effect on the ionosphere. When the signal propagation conditions change, the signal strength will also change accordingly.

scholarly journals Dynamic Line Rating—An Effective Method to Increase the Safety of Power Lines

2021 ◽  
Vol 11 (2) ◽  
pp. 492
Author(s):  
Levente Rácz ◽  
Bálint Németh
Keyword(s):  
Expert System ◽  
Electric Field ◽  
High Voltage ◽  
Low Frequency ◽  
Power Line ◽  
Power Lines ◽  
Design Parameters ◽  
Monitoring Methods ◽  
Limit Value ◽  
Potential Applications

Exceeding the electric field’s limit value is not allowed in the vicinity of high-voltage power lines because of both legal and safety aspects. The design parameters of the line must be chosen so that such cases do not occur. However, analysis of several operating power lines in Europe found that the electric field strength in many cases exceeds the legally prescribed limit for the general public. To illustrate this issue and its importance, field measurement and finite element simulation results of the low-frequency electric field are presented for an active 400 kV power line. The purpose of this paper is to offer a new, economical expert system based on dynamic line rating (DLR) that utilizes the potential of real-time power line monitoring methods. The article describes the expert system’s strengths and benefits from both technical and financial points of view, highlighting DLR’s potential for application. With our proposed expert system, it is possible to increase a power line’s safety and security by ensuring that the electric field does not exceed its limit value. In this way, the authors demonstrate that DLR has other potential applications in addition to its capacity-increasing effect in the high voltage grid.

Automatic Laser Monitoring for Dam Safety

2005 ◽  
Vol 295-296 ◽  
pp. 239-244
Author(s):  
K.D. Yue ◽  
X. Zhou ◽  
J. Gao
Keyword(s):  
Data Transmission ◽  
Can Bus ◽  
Arch Dam ◽  
Dam Safety ◽  
Monitoring Methods ◽  
Long Distance ◽  
Dam Safety Monitoring ◽  
Distance Data ◽  
Data Transmission System ◽  
Laser Monitoring

Many monitoring methods for dam safety have been proposed in recent years but it is difficult to monitor the arch dam automatically. A novel inspecting method for arch dam safety monitoring is described in this paper. This measurement system is based on the principle of transmitting the comparative displacement one by one. The error and accuracy of the system is analyzed. By this method, a large arch dam can be measured automatically. Long distance data transmission system using CAN bus and Internet is established. It is convenient to monitor the safety of dams from long distances.

Review of piezoelectric impedance based structural health monitoring: Physics-based and data-driven methods

2021 ◽  
pp. 136943322110384
Author(s):  
Xingyu Fan ◽  
Jun Li ◽  
Hong Hao
Keyword(s):  
Structural Health Monitoring ◽  
Health Monitoring ◽  
Structural Damage ◽  
Low Frequency ◽  
Data Driven ◽  
Mode Shapes ◽  
Monitoring Methods ◽  
Destructive Testing ◽  
Electromechanical Impedance ◽  
Structural Health

Vibration based structural health monitoring methods are usually dependent on the first several orders of modal information, such as natural frequencies, mode shapes and the related derived features. These information are usually in a low frequency range. These global vibration characteristics may not be sufficiently sensitive to minor structural damage. The alternative non-destructive testing method using piezoelectric transducers, called as electromechanical impedance (EMI) technique, has been developed for more than two decades. Numerous studies on the EMI based structural health monitoring have been carried out based on representing impedance signatures in frequency domain by statistical indicators, which can be used for damage detection. On the other hand, damage quantification and localization remain a great challenge for EMI based methods. Physics-based EMI methods have been developed for quantifying the structural damage, by using the impedance responses and an accurate numerical model. This article provides a comprehensive review of the exciting researches and sorts out these approaches into two categories: data-driven based and physics-based EMI techniques. The merits and limitations of these methods are discussed. In addition, practical issues and research gaps for EMI based structural health monitoring methods are summarized.

scholarly journals Refactoring and Optimization of Bridge Dynamic Displacement Based on Ensemble Empirical Mode Decomposition

Sensors ◽  
2019 ◽  
Vol 19 (14) ◽  
pp. 3125
Author(s):  
Zou ◽  
Chen ◽  
Liu
Keyword(s):  
Empirical Mode Decomposition ◽  
Field Experiments ◽  
Low Frequency ◽  
Vibration Signal ◽  
Micro Electro Mechanical System ◽  
Ensemble Empirical Mode Decomposition ◽  
Reconstruction Method ◽  
Monitoring Methods ◽  
Dynamic Displacement ◽  
Mode Decomposition

Considering the lack of precision in transforming measured micro-electro-mechanical system (MEMS) accelerometer output signals into elevation signals, this paper proposes a bridge dynamic displacement reconstruction method based on the combination of ensemble empirical mode decomposition (EEMD) and time domain integration, according to the vibration signal traits of a bridge. Through simulating bridge analog signals and verifying a vibration test bench, four bridge dynamic displacement monitoring methods were analyzed and compared. The proposed method can effectively eliminate the influence of low-frequency integral drift and high-frequency ambient noise on the integration process. Furthermore, this algorithm has better adaptability and robustness. The effectiveness of the method was verified by field experiments on highway elevated bridges.

scholarly journals Cues, creaks, and decoys: using passive acoustic monitoring as a tool for studying sperm whale depredation

2015 ◽  
Vol 72 (5) ◽  
pp. 1621-1636 ◽  
Author(s):  
Aaron Thode ◽  
Delphine Mathias ◽  
Janice Straley ◽  
Victoria O'Connell ◽  
Linda Behnken ◽  
...  
Keyword(s):  
Low Frequency ◽  
Field Tests ◽  
Sperm Whale ◽  
Acoustic Monitoring ◽  
Sperm Whales ◽  
Passive Acoustic Monitoring ◽  
Long Distance ◽  
Fishing Activity ◽  
Fishing Vessels ◽  
Passive Acoustic

Abstract Since 2003, a collaborative effort (SEASWAP) between fishers, scientists, and managers has researched how Alaskan sperm whales locate demersal longline fishing activity and then depredate sablefish from gear. Sperm whales constantly produce relatively low-frequency biosonar signals whenever foraging; therefore, over the past decade, passive acoustic monitoring (PAM) has become a basic tool, used for both measuring depredation activity and accelerating field tests of potential depredation countermeasures. This paper reviews and summarizes past published PAM research on SEASWAP, and then provides a detailed example of how PAM methods are currently being used to test countermeasures. The review covers two major research thrusts: (i) identifying acoustic outputs of fishing vessels that provide long-distance “cues” that attract whales to fishing activity; and (ii) validating whether distinctive “creak” sounds can be used to quantify and measure depredation rates, using both bioacoustic tags and statistical comparisons between visual and acoustic depredation estimates during federal sablefish surveys. The latter part of the paper then provides an example of how PAM is being used to study a particular potential countermeasure: an “acoustic decoy” which transmits fishing vessel acoustic cues to attract animals away from true fishing activity. The results of an initial 2011 field trial are presented to show how PAM was used to design the decoy signals and monitor the efficacy of the deployment. The ability of PAM to detect both whale presence and depredation behaviour has reduced the need to deploy researchers or other specialists on fishing cruises. Instead, volunteer fishers can deploy “user-friendly” acoustic recorders on their gear, greatly facilitating the testing of various deterrents, and providing the industry and regulators a convenient and unobtrusive tool for monitoring both the scale and long-term spread of this behaviour across the Alaskan fishery.

A Graphene Chain Acts as a Long-Distance Ballistic Heat Conductor

2010 ◽  
Author(s):  
Koji Takahashi ◽  
Yohei Ito ◽  
Tatsuya Ikuta
Keyword(s):  
Thermal Conductivity ◽  
Carbon Nanofiber ◽  
Soft Drink ◽  
Three Dimensional ◽  
Low Frequency ◽  
Phonon Transport ◽  
Dynamics Simulation ◽  
Infinite Length ◽  
Unexpected Result ◽  
Long Distance

A carbon nanofiber material, consisting of bottomless graphene cups inside on each other in a line, like a set of soft-drink cups, has been discovered to have the potential to conduct heat ballistically over a long distance. Its longitudinal heat transport ability had been forecast to be extremely poor due to the weak van der Waals force operating between the graphene cups, but our measurements using nano thermal sensor showed that its thermal conductivity is much higher than that along the c-axis of bulk graphite. This unexpected result can be understood by its similarity to a one-dimensional (1D) harmonic-chain where no phonon is scattered even for an infinite length. The current graphene-based nanofiber resembles this type of “superconductive” chain due to the huge difference between the stiff covalent bonding in each cup and the weak inter-cup interaction. A non-equilibrium molecular dynamics simulation is conducted to explore the phonon transport in this fiber. The simulation results show that the thermal conductivity varies with the fiber length in a power law fashion with an exponent as large as 0.7. The calculated phonon density of states and atomic motions indicate that a low-frequency quasi-1D oscillation occurs there. Our investigations show that treating the current nanofiber as a 1D chain with three-dimensional oscillations explains well why this material has the most effective ballistic phonon transport ever observed.

Sign in / Sign up

Export Citation Format

Share Document