Evaluation of Young’s Modulus in Achilles Tendons with Diabetic Neuroarthropathy

2005 ◽  
Vol 95 (3) ◽  
pp. 242-246 ◽  
Author(s):  
William P. Grant ◽  
Eric J. Foreman ◽  
Anne S. Wilson ◽  
Dwayne A. Jacobus ◽  
Renee M. Kukla
Keyword(s):  
Tensile Strength ◽  
Ultimate Tensile Strength ◽  
Young’S Modulus ◽  
Young's Modulus ◽  
Biomechanical Testing ◽  
Biomechanical Properties ◽  
Normal Tendon ◽  
Significant Difference ◽  
New Finding ◽  
Tendo Achillis

The Achilles tendon of the patient with Charcot’s foot neuroarthropathy has significantly altered physical properties compared with a normal tendon. Twenty-nine Achilles tendons from patients with Charcot’s foot (n = 20) and non-Charcot’s foot controls (n = 9) were loaded onto a biomechanical testing instrument. The biomechanical properties of the Charcot and control tendons were determined and the tendons were evaluated for differences in ultimate tensile strength and elasticity (Young’s modulus). Biomechanical test data show that there is a significant difference in ultimate tensile strength and elasticity between tendons of patients with Charcot’s foot and those of non-Charcot’s controls. The term diabetic tendo Achillis equinus is introduced as a new finding in diabetic neuroarthropathy. (J Am Podiatr Med Assoc 95(3): 242–246, 2005)

Mechanical Properties of Herbal Patches from Chitosan-Based Polymer Blends for Medical Applications

2018 ◽  
Vol 917 ◽  
pp. 52-56
Author(s):  
Jirapornchai Suksaeree
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Ultimate Tensile Strength ◽  
Polymer Blends ◽  
Young’S Modulus ◽  
Young's Modulus ◽  
Hydroxypropyl Methylcellulose ◽  
Peel Strength ◽  
Elongation At Break ◽  
Zingiber Cassumunar

Recently, Thai herbs are widely used as medicine to treat some illnesses. Zingiber cassumunar Roxb., known by the Thai name “Plai”, is a popular anti-inflammatory, antispasmodic herbal body and muscle treatment. This research aimed to prepare herbal patches that incorporated the 3 g of crude Z. cassumunar oil. The herbal patches made from different polymer blends were 2 g of 3.5%w/v chitosan and 5 g of 20%w/v hydroxypropyl methylcellulose (HPMC), or 2 g of 3.5%w/v chitosan and 5 g of 20%w/v polyvinyl alcohol (PVA) using 2 g of glycerin as a plasticizer. They were prepared by mixing all ingredients in a beaker and produced by solvent casting method in hot air oven at 70±2oC. The completed herbal patches were evaluated for their mechanical properties including Young’s modulus, ultimate tensile strength, elongation at break, T-peel strength, and tack adhesion. The thickness of blank and herbal patches was 0.263-0.282 mm and 0.269-0.275 mm, respectively. Young’s modulus, ultimate tensile strength, elongation at break, T-peel strength, and tack adhesion were 104.73-142.71 MPa, 87.92-93.28 MPa, 154.39-174.98 %, 3.43-4.88 MPa, and 5.29-7.02 MPa, respectively, for blank patches, and 116.83-147.28 MPa, 89.49-100.47 MPa, 133.78-159.27 %, 2.01-3.98 MPa, and 4.03-5.19 MPa, respectively, for herbal patches. We prepared herbal blended patches made from chitosan/PVA or chitosan/HPMC polymer matrix blends incorporating the crude Z. cassumunar oil. They had good mechanical properties that might be developed for herbal medicinal application.

scholarly journals Root Traits and Biomechanical Properties of Three Tropical Pioneer Tree Species for Forest Restoration in Landslide Areas

Forests ◽  
2020 ◽  
Vol 11 (2) ◽  
pp. 179 ◽  
Author(s):  
Lee ◽  
Chu ◽  
Lin ◽  
Kung ◽  
Lin ◽  
...  
Keyword(s):  
Tensile Strength ◽  
Young’S Modulus ◽  
Tree Species ◽  
Young's Modulus ◽  
Root Traits ◽  
Biomechanical Properties ◽  
Pioneer Species ◽  
Root Tensile Strength ◽  
Pioneer Tree ◽  
Macaranga Tanarius

Frequent earthquakes, monsoon torrential rains and typhoons cause severe landslides and soil erosion in Taiwan. Hibiscus taiwanensis, Macaranga tanarius, and Mallotus paniculatus are major pioneer tree species appearing on landslide-scarred areas. Thus, these species can be used to restore the self-sustaining native vegetation on forest landslides, to control erosion, and to stabilize slope. However, their growth performance, root traits and biomechanical properties have not been well characterized. In this study, root system and root traits were investigated using the excavation method, and biomechanical tests were performed to determine the uprooting resistance, root tensile strength and Young’s modulus of 1-year-old Hibiscus taiwanensis, Macaranga tanarius, and Mallotus paniculatus seedlings. The results reveal that relative to H. taiwanensis, M. tanarius and M. paniculatus seedlings had significantly larger root collar diameter, longer taproot length, higher root biomass, higher root density, higher root length density, heavier root mass, larger external root surface area, higher root tissue density, larger root volume, longer total root length, and a higher root tip number. Additionally, the height of M. paniculatus seedlings was significantly higher than those of H. taiwanensis and M. tanarius. Furthermore, the uprooting resistance and root tensile strength of M. paniculatus seedlings was significantly higher than those of H. taiwanensis and M. tanarius. Young’s modulus of M. paniculatus and M. tanarius seedlings was also significantly higher than that of H. taiwanensis. These growth characteristics and biomechanical properties demonstrate M. paniculatus and M. tanarius are superior than H. taiwanensis, considering growth performance, root anchorage capability, tensile strength and Young’s modulus. Taken as a whole, the rank order for species selection of these pioneer species for reforestation comes as: M. paniculatus M. tanarius H. taiwanensis. These results, along with knowledge on vegetation dynamics following landslides, allow us to better evaluate the effect of selective removal management of pioneer species on the resilience and sustainability of landslides.

scholarly journals Comparison of Riboflavin/Ultraviolet-A Cross-Linking in Porcine, Rabbit, and Human Sclera

2014 ◽  
Vol 2014 ◽  
pp. 1-5 ◽  
Author(s):  
Yali Zhang ◽  
Zhiwei Li ◽  
Lei Liu ◽  
Xuguang Han ◽  
Xiaomin Zhao ◽  
...  
Keyword(s):  
Young’S Modulus ◽  
Young's Modulus ◽  
Biomechanical Testing ◽  
Biomechanical Properties ◽  
Ultimate Stress ◽  
Cross Linking ◽  
Ultraviolet A ◽  
Rabbit Eye ◽  
Before And After ◽  
Biomechanical Parameters

Purpose. To compare the biomechanical properties of porcine, rabbit, and human sclera before and after riboflavin/ultraviolet-A (UVA) collagen cross-linking (CXL).Methods. Eight rabbits, 8 porcine eyeballs, and 8 human eyeballs were included. One rabbit eye and half of each bisected human and porcine eyeball were treated with riboflavin/UVA CXL. Untreated fellow rabbit eyes and eyeball halves served as controls. A 10 mm × 20 mm scleral band was harvested from each specimen. From this band, two 3.5 mm × 15.0 mm strips were prepared for biomechanical testing. The biomechanical parameters were ultimate stress, stress and Young’s modulus.Results. Values of stress, and Young’s modulus showed that human sclera was 4 times stiffer than porcine sclera and 3 times stiffer than rabbit sclera. In rabbit sclera, both the stress and Young’s modulus were significantly increased by CXL (P<0.05). In porcine sclera, only the ultimate stress was significantly increased by CXL (P<0.05). The biomechanical properties of human sclera were not statistically affected by CXL (P>0.05).Conclusions. Human sclera has higher biomechanical stiffness than porcine and rabbit sclera. With the same irradiation dose, riboflavin/UVA CXL increases the biomechanical stiffness of rabbit sclera but not porcine or human sclera.

Mechanical Properties Of Cu-Based Composites with in Situ Formed Ultrafine Filaments

1981 ◽  
Vol 12 ◽  
Author(s):  
J. Bevk ◽  
W. A. Sunder ◽  
G. Dublon ◽  
David E. Cohen
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Ultimate Tensile Strength ◽  
Young’S Modulus ◽  
Size Dependence ◽  
Young's Modulus ◽  
Plastic Properties ◽  
Young’S Moduli ◽  
Lattice Softening

ABSTRACTElastic and plastic properties of in situ Cu-based composites with Nb, V, and Fe filaments are reviewed. The evidence is presented for a pronounced size dependence of both the ultimate tensile strength and the Young's moduli. In composites with the smallest filaments (d∼50–200Å) and filament densities as high as 1010/cm2 dislocation density reaches values of 1013 cm/cm3. The yield stress of these samples increases dramatically over the predictions based on the “rule of mixtures” and their ultimate tensile strength approaches the estimated theoretical strength of the material (∼2.7GPa). The observed decrease of Young's modulus as a function of inverse wire diameter in the as-drawn composites is attributed to lattice softening due to high density of extended lattice defects. Upon annealing, Young's modulus increases by as much as 100% and exceeds the maximum values calculated from bulk elastic constants. Possible mechanisms leading to modulus enhancement and to related changes in magnetic and superconducting behavior of in situ composites are discussed.

Uncertainty quantification and prediction for mechanical properties of graphene aerogels via gaussian process metamodels

Nano Futures ◽  
2021 ◽  
Author(s):  
Bowen Zheng ◽  
Zeyu Zheng ◽  
Grace Gu
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Ultimate Tensile Strength ◽  
Gaussian Process ◽  
Young’S Modulus ◽  
Young's Modulus ◽  
Dynamics Simulation ◽  
Uniaxial Tensile ◽  
Graphene Aerogel ◽  
Graphene Aerogels

Abstract Graphene aerogels, a special class of 3D graphene assemblies, are well known for their exceptional combination of high strength, lightweightness, and high porosity. However, due to microstructural randomness, the mechanical properties of graphene aerogels are also highly stochastic, an issue that has been observed but insufficiently addressed. In this work, we develop Gaussian process metamodels to not only predict important mechanical properties of graphene aerogels but also quantify their uncertainties. Using the molecular dynamics simulation technique, graphene aerogels are assembled from randomly distributed graphene flakes and spherical inclusions, and are subsequently subject to a quasi-static uniaxial tensile load to deduce mechanical properties. Results show that given the same density, mechanical properties such as the Young’s modulus and the ultimate tensile strength can vary substantially. Treating density, Young’s modulus, and ultimate tensile strength as functions of the inclusion size, and using the simulated graphene aerogel results as training data, we build Gaussian process metamodels that can efficiently predict the properties of unseen graphene aerogels. In addition, statistically valid confidence intervals centered around the predictions are established. This metamodel approach is particularly beneficial when the data acquisition requires expensive experiments or computation, which is the case for graphene aerogel simulations. The present research quantifies the uncertain mechanical properties of graphene aerogels, which may shed light on the statistical analysis of novel nanomaterials of a broad variety.

scholarly journals Drying of fibrous roots strengthens the negative power relation between biomechanical properties and diameter

2021 ◽  
Author(s):  
E. C. Ekeoma ◽  
D. Boldrin ◽  
K. W. Loades ◽  
A. G. Bengough
Keyword(s):  
Tensile Strength ◽  
Water Content ◽  
Young’S Modulus ◽  
Water Loss ◽  
Young's Modulus ◽  
Biomechanical Properties ◽  
Root Diameter ◽  
Power Relation ◽  
Negative Power ◽  
Fibrous Roots

Abstract Aims Test the effects of root drying on biomechanical properties of fibrous roots. Methods Tensile strength and Young’s modulus of Festuca arundinacea roots were tested after full hydration and during progressive drying. Root diameter, water loss, and water content were measured for all treatments. Results Hydrated roots showed weak relations between biomechanical properties and diameter. After only 30 min air-drying, both tensile strength and Young’s modulus increased significantly in thin roots (< 1 mm) and after 60 min drying, both strength and Young’s modulus showed a negative power relation with root diameter. The maximum strength and Young’s modulus values recorded after 60 min drying were respectively three- and four-times greater than in hydrated roots. Strength and Young’s modulus increased rapidly when water content dropped below 0.70 g g−1. These biomechanical changes were the result of root diameter shrinkage of up to 50% after 60 min drying, driven by water loss of up to 0.7 g g−1. Conclusions Strength and Young’s modulus largely increased with root drying. We suggest controlling root moisture and testing fully hydrated roots as standard protocol, given that slope instability is generally caused by heavy rainfall events and loss of matric suction.

Influence of Hot Pressing Parameters on Mechanical Properties of PP-HA Bio-Composites

2009 ◽  
Author(s):  
Mousa Younesi ◽  
Mohammad Ebrahim Bahrololoom ◽  
Hamidreza Fooladfar
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Ultimate Tensile Strength ◽  
Young’S Modulus ◽  
Hot Pressing ◽  
Young's Modulus ◽  
Impact Resistance ◽  
Hot Press ◽  
Different Types ◽  
Press Molding

This paper focuses on the effects of pressure and temperature in hot press molding on the mechanical properties of polypropylene-hydroxyapatite composites with two different types of silanated and unsilanated hydroxyapatite. Density, crystallinity, ultimate tensile strength, Young’s modulus and impact resistance were evaluated for the two types of composites. Increasing pressure caused enhancement of density, crystallinity, MFI, ultimate tensile strength and Young’s modulus. Increases in temperature increased MFI, ultimate tensile strength and Young’s modulus whilst decreased impact resistance of composites. Effects of increasing pressure and temperature on the mechanical properties of polypropylene-silanated hydroxyapatite were less than their effects on the mechanical properties of polypropylene-unsilanated hydroxyapatite. Micrographs showed changes in fracture mode from ductile to brittle with increasing pressure and temperature during hot press molding.

scholarly journals Bioactive Cellulose Nanocrystal-Poly(ε-Caprolactone) Nanocomposites for Bone Tissue Engineering Applications

2021 ◽  
Vol 9 ◽  
Author(s):  
Jung Ki Hong ◽  
Shelley L. Cooke ◽  
Abby R. Whittington ◽  
Maren Roman
Keyword(s):  
Contact Angle ◽  
Tensile Strength ◽  
Calcium Phosphate ◽  
Ultimate Tensile Strength ◽  
Young’S Modulus ◽  
Young's Modulus ◽  
Mineral Formation ◽  
Water Contact ◽  
Bone Scaffolds ◽  
The Matrix

3D-printed bone scaffolds hold great promise for the individualized treatment of critical-size bone defects. Among the resorbable polymers available for use as 3D-printable scaffold materials, poly(ε-caprolactone) (PCL) has many benefits. However, its relatively low stiffness and lack of bioactivity limit its use in load-bearing bone scaffolds. This study tests the hypothesis that surface-oxidized cellulose nanocrystals (SO-CNCs), decorated with carboxyl groups, can act as multi-functional scaffold additives that (1) improve the mechanical properties of PCL and (2) induce biomineral formation upon PCL resorption. To this end, an in vitro biomineralization study was performed to assess the ability of SO-CNCs to induce the formation of calcium phosphate minerals. In addition, PCL nanocomposites containing different amounts of SO-CNCs (1, 2, 3, 5, and 10 wt%) were prepared using melt compounding extrusion and characterized in terms of Young's modulus, ultimate tensile strength, crystallinity, thermal transitions, and water contact angle. Neither sulfuric acid-hydrolyzed CNCs (SH-CNCs) nor SO-CNCs were toxic to MC3T3 preosteoblasts during a 24 h exposure at concentrations ranging from 0.25 to 3.0 mg/mL. SO-CNCs were more effective at inducing mineral formation than SH-CNCs in simulated body fluid (1x). An SO-CNC content of 10 wt% in the PCL matrix caused a more than 2-fold increase in Young's modulus (stiffness) and a more than 60% increase in ultimate tensile strength. The matrix glass transition and melting temperatures were not affected by the SO-CNCs but the crystallization temperature increased by about 5.5°C upon addition of 10 wt% SO-CNCs, the matrix crystallinity decreased from about 43 to about 40%, and the water contact angle decreased from 87 to 82.6°. The abilities of SO-CNCs to induce calcium phosphate mineral formation and increase the Young's modulus of PCL render them attractive for applications as multi-functional nanoscale additives in PCL-based bone scaffolds.

scholarly journals Lower Cretaceous Rodby and Palaeocene Lista Shales: Characterisation and Comparison of Top-Seal Mudstones at Two Planned CCS Sites, Offshore UK

Minerals ◽  
2020 ◽  
Vol 10 (8) ◽  
pp. 691
Author(s):  
Richard H. Worden ◽  
Michael J. Allen ◽  
Daniel R. Faulkner ◽  
James E. P. Utley ◽  
Clare E. Bond ◽  
...  
Keyword(s):  
Tensile Strength ◽  
Young’S Modulus ◽  
Lower Cretaceous ◽  
Oil And Gas ◽  
Young's Modulus ◽  
Splitting Tensile Strength ◽  
Fracture Permeability ◽  
Log Data ◽  
Gamma Density ◽  
Significant Difference

Petroleum-rich basins at a mature stage of exploration and production offer many opportunities for large-scale Carbon Capture and Storage (CCS) since oil and gas were demonstrably contained by low-permeability top-sealing rocks, such as shales. For CCS to work, there must be effectively no leakage from the injection site, so the nature of the top-seal is an important aspect for consideration when appraising prospective CCS opportunities. The Lower Cretaceous Rodby Shale and the Palaeocene Lista Shale have acted as seals to oil and gas accumulations (e.g., the Atlantic and Balmoral fields) and may now play a critical role in sealing the Acorn and East Mey subsurface carbon storage sites. The characteristics of these important shales have been little addressed in the hydrocarbon extraction phase, with an understandable focus on reservoir properties and their influence on resource recovery rates. Here, we assess the characteristics of the Rodby and Lista Shales using wireline logs, geomechanical tests, special core analysis (mercury intrusion) and mineralogical and petrographic techniques, with the aim of highlighting key properties that identify them as suitable top-seals. The two shales, defined using the relative gamma log values (or Vshale), have similar mean pore throat radius (approximately 18 nm), splitting tensile strength (approximately 2.5 MPa) and anisotropic values of splitting tensile strength, but they display significant differences in terms of wireline log character, porosity and mineralogy. The Lower Cretaceous Rodby Shale has a mean porosity of approximately 14 %, a mean permeability of 263 nD (2.58 × 10−19 m2), and is calcite rich and has clay minerals that are relatively rich in non-radioactive phases such as kaolinite. The Palaeocene Lista Shale has a mean porosity of approximately 16% a mean permeability of 225 nD (2.21 × 10−19 m2), and is calcite free, but contains abundant quartz silt and is dominated by smectite. The 2% difference in porosity does not seem to equate to a significant difference in permeability. Elastic properties derived from wireline log data show that Young’s modulus, material stiffness, is very low (5 GPa) for the most shale (clay mineral)-rich Rodby intervals, with Young’s modulus increasing as shale content decreases and as cementation (e.g., calcite) increases. Our work has shown that Young’s modulus, which can be used to inform the likeliness of tensile failure, may be predictable based on routine gamma, density and compressive sonic logs in the majority of wells where the less common shear logs were not collected. The predictability of Young’s modulus from routine well log data could form a valuable element of CCS-site top-seal appraisals. This study has shown that the Rodby and Lista Shales represent good top-seals to the Acorn and East Mey CCS sites and they can hold CO2 column heights of approximately 380 m. The calcite-rich Rodby Shale may be susceptible to localised carbonate dissolution and increasing porosity and permeability but decreasing tendency to develop fracture permeability in the presence of injected CO2, as brittle calcite dissolves. In contrast, the calcite-free, locally quartz-rich, Lista Shale will be geochemically inert to injected CO2 but retain its innate tendency to develop fracture permeability (where quartz rich) in the presence of injected CO2.

Sign in / Sign up

Export Citation Format

Share Document