scholarly journals Regulation and control of Schottky barrier in graphene/MoSe2 heteojuinction by asymmetric oxygeng doping

2022 ◽  
Vol 71 (1) ◽  
pp. 017104-017104
Author(s):  
Hao Guo-Qiang ◽  
◽  
Zhang Rui ◽  
Zhang Wen-Jing ◽  
Chen Na ◽  
...  
Keyword(s):  
Schottky Barrier ◽  
And Control

Engineered Schottky barrier diodes for the modification and control of Schottky barrier heights

1987 ◽  
Vol 61 (11) ◽  
pp. 5159-5169 ◽  
Author(s):  
S. J. Eglash ◽  
N. Newman ◽  
S. Pan ◽  
D. Mo ◽  
K. Shenai ◽  
...  
Keyword(s):  
Schottky Barrier ◽  
Schottky Barrier Diodes ◽  
Barrier Heights ◽  
And Control

Quasi-Schottky Diodes on (n)In.53Ga.47as with Barrier Heights of 0.6 eV

1991 ◽  
Vol 240 ◽  
Author(s):  
M. Marso ◽  
P. Kordoš ◽  
R. Meyer ◽  
H. Lüth
Keyword(s):  
Schottky Barrier ◽  
Barrier Height ◽  
Schottky Diodes ◽  
Reverse Current ◽  
Surface Layers ◽  
Fully Depleted ◽  
Barrier Heights ◽  
Effective Barrier ◽  
Basic Parameters ◽  
And Control

ABSTRACTThe modification and control of the Schottky barrier height on (n)InGaAs is an important tool at the device preparation as the barrier height is very low, øB° = 0.2 eV. We report about the Schottky barrier enhancement on (n)InGaAs by thin fully depleted surface layers of high doped (p+)InGaAs. Structures with different thicknesses of (p+)InGaAs in the range from 8 to 80 nm were grown by LP MOVPE technique and quasi-Schottky diodes with different contact areas were prepared using titanium as a barrier metal. I-V and I-T characteristics were measured and analysed to obtain basic parameters of prepared diodes, i. e. ideality factor n, effective barrier height øB, series resistance Rgand reverse current density JR (1V). The barrier height enhancement increases with the thickness of the (p+)-layer. Effective barrier heights of øB>0.6 eV, i.e. higher than reported until now, can be obtained with the surface layers of (p+)InGaAs with thicknesses exceeding 25 nm.

scholarly journals High-Performance Temperature Sensors Based on Dual 4H-SiC JBS and SBD Devices

Materials ◽  
2020 ◽  
Vol 13 (2) ◽  
pp. 445 ◽  
Author(s):  
Seong-Ji Min ◽  
Myeong Cheol Shin ◽  
Ngoc Thi Nguyen ◽  
Jong-Min Oh ◽  
Sang-Mo Koo
Keyword(s):  
Schottky Barrier ◽  
Barrier Height ◽  
Ideality Factor ◽  
High Performance ◽  
Thermal Sensitivity ◽  
Forward Bias ◽  
Temperature Sensors ◽  
Peak Sensitivity ◽  
Good Repeatability ◽  
And Control

Schottky diode-based temperature sensors are the most common commercially available temperature sensors, and they are attracting increasing interest owing to their higher Schottky barrier height compared to their silicon counterparts. Therefore, this paper presents a comparison of the thermal sensitivity variation trend in temperature sensors, based on dual 4H-SiC junction barrier Schottky (JBS) diodes and Schottky barrier diodes (SBDs). The forward bias current–voltage characteristics were acquired by sweeping the DC bias voltage from 0 to 3 V. The dual JBS sensor exhibited a higher peak sensitivity (4.32 mV/K) than the sensitivity exhibited by the SBD sensor (2.85 mV/K), at temperatures ranging from 298 to 573 K. The JBS sensor exhibited a higher ideality factor and barrier height owing to the p–n junction in JBS devices. The developed sensor showed good repeatability, maintaining a stable output over several cycles of measurements on different days. It is worth noting that the ideality factor and barrier height influenced the forward biased voltage, leading to a higher sensitivity for the JBS device compared to the SBD device. This allows the JBS device to be suitably integrated with SiC power management and control circuitry to create a sensing module capable of working at high temperatures.

Control of Metal Alloy Oxidation with Electric Fields

1973 ◽  
Vol 31 ◽  
pp. 164-165
Author(s):  
R. R. Dils ◽  
P. S. Follansbee
Keyword(s):  
Electric Fields ◽  
Oxidation Process ◽  
Base Alloy ◽  
Oxide Surface ◽  
Platinum Electrodes ◽  
Insulating Layer ◽  
Iron Base Alloy ◽  
Alloy Oxidation ◽  
Aluminum Oxide Layer ◽  
And Control

Electric fields have been applied across oxides growing on a high temperature alloy and control of the oxidation of the material has been demonstrated. At present, three-fold increases in the oxidation rate have been measured in accelerating fields and the oxidation process has been completely stopped in a retarding field.The experiments have been conducted with an iron-base alloy, Pe 25Cr 5A1 0.1Y, although, in principle, any alloy capable of forming an adherent aluminum oxide layer during oxidation can be used. A specimen is polished and oxidized to produce a thin, uniform insulating layer on one surface. Three platinum electrodes are sputtered on the oxide surface and the specimen is reoxidized.

Evidence for a Blood Ganglion Barrier in the Superior Cervical Ganglion of the Rat

1982 ◽  
Vol 40 ◽  
pp. 204-204
Author(s):  
D. M. DePace
Keyword(s):  
Blood Vessels ◽  
Superior Cervical Ganglion ◽  
Peripheral Nerves ◽  
Time Schedule ◽  
Transmission Electron ◽  
Cervical Ganglion ◽  
The Central Nervous System ◽  
Cervical Ganglia ◽  
Capillary Circulation ◽  
And Control

The majority of blood vessels in the superior cervical ganglion possess a continuous endothelium with tight junctions. These same features have been associated with the blood brain barrier of the central nervous system and peripheral nerves. These vessels may perform a barrier function between the capillary circulation and the superior cervical ganglion. The permeability of the blood vessels in the superior cervical ganglion of the rat was tested by intravenous injection of horseradish peroxidase (HRP). Three experimental groups of four animals each were given intravenous HRP (Sigma Type II) in a dosage of.08 to.15 mg/gm body weight in.5 ml of.85% saline. The animals were sacrificed at five, ten or 15 minutes following administration of the tracer. Superior cervical ganglia were quickly removed and fixed by immersion in 2.5% glutaraldehyde in Sorenson's.1M phosphate buffer, pH 7.4. Three control animals received,5ml of saline without HRP. These were sacrificed on the same time schedule. Tissues from experimental and control animals were reacted for peroxidase activity and then processed for routine transmission electron microscopy.

Effects of renovascular hypertension on rat adrenal zona glomerulosa

1978 ◽  
Vol 36 (2) ◽  
pp. 582-583
Author(s):  
G. Mazzocchi ◽  
P. Rebuffat ◽  
C. Robba ◽  
P. Vassanelli ◽  
G. G. Nussdorfer
Keyword(s):  
Renovascular Hypertension ◽  
Left Kidney ◽  
Renin Angiotensin System ◽  
Plasma Renin ◽  
Zona Glomerulosa ◽  
Ultrastructural Changes ◽  
Albino Rats ◽  
Left Renal Artery ◽  
Angiotensin System ◽  
And Control

It is well known that the rat adrenal zona glomerulosa steroidogenic activity is controlled by the renin-angiotensin system. The ultrastructural changes in the rat zona glomerulosa cells induced by renovascular hypertension were described previously, but as far as we are aware no correlated biochemical and morphometric investigations were performed.Twenty adult male albino rats were divided into 2 experimental groups. One group was subjected to restriction of blood flow to the left kidney by the application of a silver clip about the left renal artery. The other group was sham-operated and served as a control. Renovascular hypertension developed in about 10 days: sistolic blood pressure averaged 165 ± 6. 4 mmHg, whereas it was about 110 ± 3. 8 mmHg in the control animals. The hypertensive and control rats were sacrificed 20 days after the operation. The blood was collected and plasma renin activity was determined by radioimmunological methods. The aldosterone concentration was radioimmunologically assayed both in the plasma and in the homogenate of the left capsular adrenal gland.

X-Ray Replication of Submicrometer Linewidth Patterns

1977 ◽  
Vol 35 ◽  
pp. 136-137
Author(s):  
Henry I. Smith ◽  
D.C. Flanders
Keyword(s):  
Electron Beam Lithography ◽  
Cross Sectional ◽  
X Ray ◽  
Electron Backscattering ◽  
Spatial Frequencies ◽  
Cross Sectional Profile ◽  
Carbon Foils ◽  
Sectional Profile ◽  
And Control ◽  
Soft Radiation

Scanning electron beam lithography has been used for a number of years to write submicrometer linewidth patterns in radiation sensitive films (resist films) on substrates. On semi-infinite substrates, electron backscattering severely limits the exposure latitude and control of cross-sectional profile for patterns having fundamental spatial frequencies below about 4000 Å(l),Recently, STEM'S have been used to write patterns with linewidths below 100 Å. To avoid the detrimental effects of electron backscattering however, the substrates had to be carbon foils about 100 Å thick (2,3). X-ray lithography using the very soft radiation in the range 10 - 50 Å avoids the problem of backscattering and thus permits one to replicate on semi-infinite substrates patterns with linewidths of the order of 1000 Å and less, and in addition provides means for controlling cross-sectional profiles. X-radiation in the range 4-10 Å on the other hand is appropriate for replicating patterns in the linewidth range above about 3000 Å, and thus is most appropriate for microelectronic applications (4 - 6).

Ultrastructural changes in sciatic nerve tissue: Effects of passive maternal smoking

1983 ◽  
Vol 41 ◽  
pp. 650-651
Author(s):  
Amankwah K.S. ◽  
A.D. Weberg ◽  
R.C. Kaufmann
Keyword(s):  
Sciatic Nerve ◽  
Maternal Smoking ◽  
Ultrastructural Level ◽  
Uranyl Acetate ◽  
Nerve Tissue ◽  
Ultrastructural Changes ◽  
Cacodylate Buffer ◽  
And Control ◽  
Spontaneous Delivery

Previous research has revealed that passive (involuntary inhalation) tobacco smoking during gestation can have adverse effects upon the developing fetus. These prior investigations did not concentrate on changes in fetal morphology. This study was undertaken to delineate fetal neural abnormalities at the ultrastructural level in mice pups exposed in utero to passive maternal smoking.Pregnant study animals, housed in a special chamber, were subjected to cigarette smoke daily from conception until delivery. Blood tests for determination of carbon monoxide levels were run at 15-18 days gestation. Sciatic nerve tissue from experimental and control animals were obtained following spontaneous delivery and fixed in 2.5% gluteraldehyde in 0.1M cacodylate buffer pH 7.3. The samples were post-fixed in osmium ferrocyanide (1:1 mixture of 1.5% aqueous OSO4 and 2.5% K4 Fe(CN)6). Following dehydration, the tissues were infiltrated with and embedded in Spurr. Sections were stained with uranyl acetate and lead citrate.

Sign in / Sign up

Export Citation Format

Share Document