scholarly journals SiO2/PI-NiI2 colorimetric humidity sensor with fast response and recovery

2021 ◽  
Vol 0 (0) ◽  
pp. 0-0
Author(s):  
Keyword(s):  
Humidity Sensor ◽  
Fast Response ◽  
Response And Recovery

scholarly journals Tin Disulfide-Coated Microfiber for Humidity Sensing with Fast Response and High Sensitivity

Crystals ◽  
2021 ◽  
Vol 11 (6) ◽  
pp. 648
Author(s):  
Aijie Liang ◽  
Jingyuan Ming ◽  
Wenguo Zhu ◽  
Heyuan Guan ◽  
Xinyang Han ◽  
...  
Keyword(s):  
Humidity Sensor ◽  
Small Diameter ◽  
High Sensitivity ◽  
Large Change ◽  
Small Variation ◽  
Response Speed ◽  
Fast Response ◽  
Tin Disulfide ◽  
Recovery Times ◽  
Response And Recovery

Breath monitoring is significant in assessing human body conditions, such as cardiac and pulmonary symptoms. Optical fiber-based sensors have attracted much attention since they are immune to electromagnetic radiation, thus are safe for patients. Here, a microfiber (MF) humidity sensor is fabricated by coating tin disulfide (SnS2) nanosheets onto the surface of MF. The small diameter (~8 μm) and the long length (~5 mm) of the MF promise strong interaction between guiding light and SnS2. Thus, a small variation in the relative humidity (RH) will lead to a large change in optical transmitted power. A high RH sensitivity of 0.57 dB/%RH is therefore achieved. The response and recovery times are estimated to be 0.08 and 0.28 s, respectively. The high sensitivity and fast response speed enable our SnS2-MF sensor to monitor human breath in real time.

scholarly journals A Full-Range Flexible and Printed Humidity Sensor Based on a Solution-Processed P(VDF-TrFE)/Graphene-Flower Composite

Nanomaterials ◽  
2021 ◽  
Vol 11 (8) ◽  
pp. 1915
Author(s):  
Shenawar Ali Khan ◽  
Muhammad Saqib ◽  
Muhammad Muqeet Rehman ◽  
Hafiz Mohammad Mutee Ur Rehman ◽  
Sheik Abdur Rahman ◽  
...  
Keyword(s):  
Active Layer ◽  
Humidity Sensor ◽  
High Reliability ◽  
Full Range ◽  
High Sensitivity ◽  
Fast Response ◽  
Considerable Change ◽  
Relative Humidity Range ◽  
Response And Recovery ◽  
Proportional Relationship

A novel composite based on a polymer (P(VDF-TrFE)) and a two-dimensional material (graphene flower) was proposed as the active layer of an interdigitated electrode (IDEs) based humidity sensor. Silver (Ag) IDEs were screen printed on a flexible polyethylene terephthalate (PET) substrate followed by spin coating the active layer of P(VDF-TrFE)/graphene flower on its surface. It was observed that this sensor responds to a wide relative humidity range (RH%) of 8–98% with a fast response and recovery time of 0.8 s and 2.5 s for the capacitance, respectively. The fabricated sensor displayed an inversely proportional response between capacitance and RH%, while a directly proportional relationship was observed between its impedance and RH%. P(VDF-TrFE)/graphene flower-based flexible humidity sensor exhibited high sensitivity with an average change of capacitance as 0.0558 pF/RH%. Stability of obtained results was monitored for two weeks without any considerable change in the original values, signifying its high reliability. Various chemical, morphological, and electrical characterizations were performed to comprehensively study the humidity-sensing behavior of this advanced composite. The fabricated sensor was successfully used for the applications of health monitoring and measuring the water content in the environment.

scholarly journals Capacitive type Humidity Sensor based on PANI decorated Cu-Zns Porous Micropshere

2020 ◽  
Author(s):  
Jolly Bhadra ◽  
Hemalatha Parangusan ◽  
Zubair Ahmad ◽  
Shoaib Mallick ◽  
Farid Touati ◽  
...  
Keyword(s):  
Humidity Sensor ◽  
In Situ Polymerization ◽  
Fast Response ◽  
Polymerization Process ◽  
Average Response ◽  
Surface Absorption ◽  
Absorption Properties ◽  
Recovery Times ◽  
Response And Recovery

PANI coated Cu-ZnS porous microsphere structures have been synthesized by hydrothermal method and in-situ polymerization process. The synthesized composite is characterized by different techniques in order to study the structural, morphological and surface absorption properties. The experimental observation demonstrates that the PANI/1%Cu-ZnS composite has better sensitivity, fast response and good stability as compared to pure PANI and other PANI/CuZnS compositions. Finally, PANI/1% Cu-ZnS composite has been found to be optimized for the humidity sensors due to its well-distributed roughness, porosity and hydrophilicity. The average response and recovery times of the PANI/1% Cu-ZnS are found to be 42 s and 24 s, respectively, which outperform recent results.

scholarly journals SiO2/PI-NiI2 colorimetric humidity sensor with fast response and recovery

2022 ◽  
Vol 71 (2) ◽  
pp. 020701-020701
Author(s):  
Xu Shi-Yao ◽  
◽  
Wu Yi-Wei ◽  
Zhou Yan ◽  
Yin Xiang-Yang ◽  
...  
Keyword(s):  
Humidity Sensor ◽  
Fast Response ◽  
Response And Recovery

Ultra-smooth TiO2 thin film based optical humidity sensor with a fast response and recovery

2019 ◽  
Vol 58 (36) ◽  
pp. 9740
Author(s):  
Xiaoqing Wang ◽  
Min Lai ◽  
Ruijie Gao ◽  
Xixi Huang ◽  
Ziming Zhao ◽  
...  
Keyword(s):  
Thin Film ◽  
Humidity Sensor ◽  
Tio2 Thin Film ◽  
Fast Response ◽  
Response And Recovery

scholarly journals High Sensitivity and High Stability QCM Humidity Sensors Based on Polydopamine Coated Cellulose Nanocrystals/Graphene Oxide Nanocomposite

Nanomaterials ◽  
2020 ◽  
Vol 10 (11) ◽  
pp. 2210
Author(s):  
Yao Yao ◽  
Xianhe Huang ◽  
Qiao Chen ◽  
Zhen Zhang ◽  
Weiwei Ling
Keyword(s):  
Graphene Oxide ◽  
High Stability ◽  
Humidity Sensor ◽  
High Sensitivity ◽  
Fast Response ◽  
Dynamic Resistance ◽  
Sensitive Material ◽  
Detection Range ◽  
Response And Recovery ◽  
Humidity Range

In this paper, a high sensitivity and high stability quartz crystal microbalance (QCM) humidity sensor using polydopamine (PDA) coated cellulose nanocrystal (CNC)/graphene oxide (GO) (PDA@CNC/GO) nanocomposite as sensitive material is demonstrated. The PDA@CNC was prepared by the self-polymerization action on the surface of CNC, and it acted as filler material to form functional nanocomposite with GO. The material characteristics of PDA@CNC, CNC/GO and PDA@CNC/GO were analyzed by transmission electron microscope (TEM) and Fourier transform infrared spectroscopy (FTIR), respectively. The experimental results show that the introduction of PDA@CNC into GO film not only effectively enhanced the sensitivity of GO-based nanocomposite-coated QCM sensor but also significantly maintained high stability in the entire humidity range. The PDA@CNC/GO30-coated QCM humidity sensor exhibited a superior response sensitivity up to 54.66 Hz/% relative humidity (RH), while the change rate of dynamic resistance of the sensor in the humidity range of 11.3–97.3% RH is only 14% that is much smaller than that of CNC/GO-coated QCM. Besides, the effect of the PDA@CNC content on the sensitivity and stability of GO-based nanocomposite-coated QCM humidity was also studied. Moreover, other performances of PDA@CNC/GO-coated QCM humidity sensor, including humidity hysteresis, fast response and recovery and long-term stability, were systematically investigated. This work suggests that PDA@CNC/GO nanocomposite is a promising candidate material for realizing high sensitivity and high stability QCM humidity sensor in the entire humidity detection range.

MoS2-based all-fiber humidity sensor for monitoring human breath with fast response and recovery

2017 ◽  
Vol 251 ◽  
pp. 180-184 ◽  
Author(s):  
Bobo Du ◽  
Dexing Yang ◽  
Xiaoyang She ◽  
Yuan Yuan ◽  
Dong Mao ◽  
...  
Keyword(s):  
Humidity Sensor ◽  
Fast Response ◽  
Human Breath ◽  
Response And Recovery

Carbon Nanotube Gas Sensor Fabricated on Anodic Aluminum Oxide

2007 ◽  
Vol 124-126 ◽  
pp. 1309-1312
Author(s):  
Nguyen Duc Hoa ◽  
Nguyen Van Quy ◽  
Gyu Seok Choi ◽  
You Suk Cho ◽  
Se Young Jeong ◽  
...  
Keyword(s):  
Carbon Nanotubes ◽  
Carbon Nanotube ◽  
Gas Sensor ◽  
Chemical Vapor ◽  
Fast Response ◽  
Device Fabrication ◽  
Alumina Oxide ◽  
Response And Recovery ◽  
New Type ◽  
P Type

A new type of gas sensor was realized by directly depositing carbon nanotube on nano channels of the anodic alumina oxide (AAO) fabricated on p-type silicon substrate. The carbon nanotubes were synthesized by thermal chemical vapor deposition at a very high temperature of 1200 oC to improve the crystallinity. The device fabrication process was also developed. The contact of carbon nanotubes and p-type Si substrate showed a Schottky behavior, and the Schottky barrier height increased with exposure to gases while the overall conductivity decreased. The sensors showed fast response and recovery to ammonia gas upon the filling (400 mTorr) and evacuation.

Sign in / Sign up

Export Citation Format

Share Document