scholarly journals Finite Element Model to Analyze an Installation Load-based Stress-Strain State of the Parts Forming Gas Joint of a Medium-Speed Diesel Engine

2014 ◽  
Vol 15 (11) ◽  
Author(s):  
Nikolay Chainov ◽  
Andrey Krasnokutskii ◽  
Alexey Kapshukov
Keyword(s):  
Finite Element ◽  
Diesel Engine ◽  
Finite Element Model ◽  
Strain State ◽  
Element Model ◽  
Stress Strain ◽  
Stress Strain State ◽  
Medium Speed

scholarly journals On the issue of dynamic loading of supporting structures of special wheeled chassis

2019 ◽  
pp. 73-83
Author(s):  
V. I. Tarichko ◽  
P. I. Shalupina
Keyword(s):  
Finite Element ◽  
Finite Element Model ◽  
Dynamic Loading ◽  
Strain State ◽  
Element Model ◽  
Stress Strain ◽  
Full Size ◽  
Equivalent Stresses ◽  
Stress Strain State ◽  
Supporting Structures

The paper focuses on a method for assessing the dynamic loading of the frame of a special wheeled chassis when it moves on roads of various categories. Based on the developed finite element model of the frame, we obtained and analyzed full-size patterns of the stress-strain state of the frame and oscillograms of equivalent stresses in the most loaded zones of the frame.

scholarly journals STRESS-STRAIN STATE OF FRAME STRUCTURES AT THE DIFFERENT SNOW PRESSURE

2019 ◽  
Vol 7 (2) ◽  
pp. 5-9
Author(s):  
Галина Кравченко ◽  
Galina Kravchenko ◽  
Елена Труфанова ◽  
Elena Trufanova ◽  
Денис Суслопаров ◽  
...  
Keyword(s):  
Finite Element ◽  
Finite Element Model ◽  
Strain State ◽  
Element Model ◽  
Frame Structures ◽  
Stress Strain ◽  
Snow Load ◽  
Stress Strain State ◽  
Snow Pressure ◽  
Snow Loading

The multi-variant loading of the large-span unique steel covering of the stadium under snow load is considered. The spatial finite element model is developed using LIRA software. The analysis of the existing schemes application of snow loading is carried out according to the codes. Four snow load cases on the stadium's covering are assumed for analysis. The analysis of the stress-strain state of the stadium structures, the selection and verification of sections of the steel covering are performed. The results show that it is necessary to simulate behaviour of a structure under all possible load cases.

scholarly journals ANALYSIS OF FEATURES OF APPLIED SOFTWARE “LIRA” IN CALCULATIONS OF NON-CIRCULAR TUNNEL LININGS

2019 ◽  
pp. 41-50
Author(s):  
V. P. KUPRIY ◽  
O. L. TIUTKIN ◽  
P. YE. ZAKHARCHENKO
Keyword(s):  
Finite Element ◽  
Numerical Analysis ◽  
Finite Element Model ◽  
Software Package ◽  
Strain State ◽  
Element Model ◽  
Finite Element Models ◽  
Stress Strain ◽  
Stress Strain State ◽  
The Finite Element Model

Purpose. The article examines the effect on the stress-strain state of the parameters of the finite-element model created in the “Lira” software package in a numerical analysis of non-circular outlined tunnels. Methodology To achieve this goal, the authors developed finite element models of the calotte part of the mine during the construction of a double track railway tunnel using “Lira” software. In each of the models in the “Lira” software package, the interaction zone with temporary fastening was sampled in a specific way. After creation of models, their numerical analysis with the detailed research of his results was conducted. Findings. In the finite element models, the values of deformations and stresses in the horizontal and vertical axes, as well as the maximum values of the moments and longitudinal forces in the temporary fastening were obtained. A comparative analysis of the obtained values of the components of the stress-strain state with a change in the parameters of the finite element model was carried out. The graphs of the laws of these results from the discretization features of the two models were plotted. The third finite element model with a radial meshing in the zone of interaction of temporary support with the surrounding soil massif was investigated. Originality It has been established that in the numerical analysis of the SSS of a tunnel lining of a non-circular outline, its results substantially depend on the shape, size and configuration of the applied finite elements, on the size of the computational area of the soil massif, and also on the conditions for taking into account the actual (elastic or plastic) behavior of the soil massif.  Practical value. The features of discretization and the required dimensions of the computational area of the soil massif were determined when modeling the “lining – soil massif” system, which provide sufficient accuracy for calculating the parameters of the stress-strain state of the lining.

scholarly journals MATHEMATICAL SUBSTANTIATION OF THE USE OF DIFFERENT TYPES OF CLAMMERS DURING THE RESTORATION OF THE DENTITION WITH DOUBLE-SIDED DISTAL DEFECTS AND THE DEFECT INCLUDED IN THE FRONTAL AREA BY REMOVABLE PROSTHETICS

2019 ◽  
Vol 23 (1-2) ◽  
pp. 13-16
Author(s):  
R.V. Kozak ◽  
D.M. Korol
Keyword(s):  
Finite Element ◽  
Finite Element Model ◽  
Strain State ◽  
Element Model ◽  
Stress Strain ◽  
Equivalent Stresses ◽  
Periodontal Tissues ◽  
Stress Strain State ◽  
Removable Denture ◽  
Periodontal Ligaments

The basic conditions that ensure good functional qualities and durability of prosthetic structures from the point of view of biomechanics, undoubtedly include an optimal way of fixing a partial removable prosthesis, which consists in the correct choice of the clamping system that ensures reliable fixation of the prosthesis in the given position and at the same time causing a minimum of harm supporting teeth, as well as the most rational distribution of occlusal loads transmitted to the supporting tissues, since it is these factors that determine the durability functioning dentures. The purpose of biomechanical studies is to analyze the stress-strain state of the supporting teeth of partial removable prostheses replacing the included and terminal defects of the dentition when fixing the prosthesis on the supporting teeth with the help of holding and supporting-retaining clamps. The studies were performed on a model of the mandible with overall dimensions of the cross section corresponding to some average dimensions. The first volumetric finite element model was developed to study the stress-strain state of periodontal ligaments of supporting teeth and supporting gingival tissues when the incomplete and bilaterial end defects of the dentition were replaced (1 class 1 subclass by Kennedy) of the mandible by a removable denture with fixation by retaining clamps on the canines and the first premolars. The second volumetric finite element model is designed to study the stress-strain state of periodontal ligaments of supporting teeth and supporting gum tissues when the included and two-sided end defects of the dentition of the lower jaw are replaced by a removable clasp prosthesis with fixation of support-retaining clamps on canines and first premolars with support arms of clamps from the distal sides of premolars. As a result of the studies performed, the following conclusions can be drawn: In both considered variants fixation of removable clasp prostheses loaded with maximum values of equivalent stresses in the periodontium of the supporting teeth is localized at the apex of the alveolar ridge, which indicates the transfer of the "clutching" supporting teeth of the clasp prosthesis. The maximum values f equivalent stresses in the periodontitis of the supporting teeth during fixation of the removable clasp prosthesis by the support-retaining clamps on the canines and the first premolars exceed the corresponding values of the equivalent stresses for the case of fixing the prosthesis with retention clamps by 30-140%! With an increase in gum compliance, the values of equivalent stresses in the periodontitis of the supporting teeth during fixation of the removable clasp prosthesis by the retaining clasps vary insignificantly within 25%, and an increase in the corresponding equivalent stresses with the use of support-holding clasps may be 65%. In order to ensure the maximum sparing regimen of periodontal tissues of supporting teeth and as a result - the possibility of the most prolonged use of the prosthesis without loosening of the supporting teeth, it seems more expedient to give preference to the use of clasp prostheses with the fixation of the retaining clasps.

Sign in / Sign up

Export Citation Format

Share Document