scholarly journals Characterization of machining quality attributes based on spindle probe, coordinate measuring machine, and surface roughness data

2014 ◽  
Vol 1 (2) ◽  
pp. 128-139 ◽  
Author(s):  
Tzu-Liang Bill Tseng ◽  
Yongjin James Kwon
Keyword(s):  
Surface Roughness ◽  
Coordinate Measuring Machine ◽  
Dimensional Accuracy ◽  
Quality Characteristics ◽  
Machining Parameters ◽  
Production Environment ◽  
Significant Interaction Effect ◽  
Machining Quality ◽  
Measuring Machine ◽  
Touch Probe

Abstract This study investigates the effects of machining parameters as they relate to the quality characteristics of machined features. Two most important quality characteristics are set as the dimensional accuracy and the surface roughness. Before any newly acquired machine tool is put to use for production, it is important to test the machine in a systematic way to find out how different parameter settings affect machining quality. The empirical verification was made by conducting a Design of Experiment (DOE) with 3 levels and 3 factors on a state-of-the-art Cincinnati Hawk Arrow 750 Vertical Machining Center (VMC). Data analysis revealed that the significant factor was the Hardness of the material and the significant interaction effect was the Hardness + Feed for dimensional accuracy, while the significant factor was Speed for surface roughness. Since the equally important thing is the capability of the instruments from which the quality characteristics are being measured, a comparison was made between the VMC touch probe readings and the measurements from a Mitutoyo coordinate measuring machine (CMM) on bore diameters. A machine mounted touch probe has gained a wide acceptance in recent years, as it is more suitable for the modern manufacturing environment. The data vindicated that the VMC touch probe has the capability that is suitable for the production environment. The test results can be incorporated in the process plan to help maintain the machining quality in the subsequent runs.

Evaluation of Different Internal Structure and Build Orientation for Multijet Modeling Process

2013 ◽  
Vol 315 ◽  
pp. 587-591 ◽  
Author(s):  
M.N. Hafsa ◽  
M. Ibrahim ◽  
S. Sharif ◽  
M.F.M. Omar ◽  
M.A. Zainol
Keyword(s):  
Surface Roughness ◽  
Internal Structure ◽  
Coordinate Measuring Machine ◽  
Dimensional Accuracy ◽  
Part Quality ◽  
Modeling Process ◽  
Measuring Machine ◽  
Complex Parts ◽  
Processing Steps ◽  
Better Than

Rapid Prototyping (RP) technology has proven its capability to produce complex parts with shorter lead time. This advantage could benefit tremendously in application such as the Investment Casting (IC) process. The focus of the study is the production of sacrificial IC patterns produced using Multijet Modeling (MJM) RP technology. It includes the evaluation of dimensional accuracy and the surface roughness of part with a hollow and quasi hollow inner support patterns. Different internal structure's pattern were developed using CAD software, and the part were fabricated using MJM technique in two different build orientations. Analyses were done using Coordinate Measuring Machine (CMM) and the surface roughness tester. Results show that part built with 90º orientation is better than part built with 0º orientation both in terms of accuracies and roughness. Different internal structure similarly affects the final part quality, though the post processing steps also have their influence, thus making it no clear different among the parts. However, it demonstrated parts with square structure produced the best dimensional accuracy and the part with hatch structure produced the best surface roughness.

scholarly journals Evaluation of dimensional accuracy of dental bridges manufactured with conventional casting technique and CAD/CAM system with Ceramill Sintron blocks using CMM

2018 ◽  
Vol 12 (4) ◽  
pp. 264-271 ◽  
Author(s):  
Alireza Izadi ◽  
Fariborz Vafaee ◽  
Arash Shishehian ◽  
Ghodratollah Roshanaei ◽  
Behzad Fathi Afkari
Keyword(s):  
Reference Model ◽  
Coordinate Measuring Machine ◽  
Dimensional Accuracy ◽  
Three Dimensions ◽  
Casting Technique ◽  
Dimensional Changes ◽  
Conventional Casting ◽  
Cad Cam ◽  
Milling Method ◽  
Measuring Machine

Background. Recently, non-presintered chromium-cobalt (Cr-Co) blocks with the commercial name of Ceramill Sintron were introduced to the market. However, comprehensive studies on the dimensional accuracy and fit of multi-unit frameworks made of these blocks using the coordinate measuring machine (CMM) are lacking. This study aimed to assess and compare the dimensional changes and fit of conventional casting and milled frameworks using Ceramill Sintron. Methods. A metal model was designed and scanned and 5-unit frameworks were fabricated using two techniques: (I) the conventional casting method (n=20): the wax model was designed, milled in the CAD/CAM machine, flasked and invested; (II) the milling method using Ceramill Sintron blocks (n=20): the wax patterns of group 1 were used; Ceramill Sintron blocks were milled and sintered. Measurements were made on the original reference model and the fabricated frameworks using the CMM in all the three spatial dimensions, and dimensional changes were recorded in a checklist. Data were analyzed with descriptive statistics, and the two groups were compared using one-way ANOVA and Tukey test (α=0.05). Results. The fabricated frameworks in both groups showed significant dimensional changes in all the three dimensions. Comparison of dimensional changes between the two groups revealed no significant differences (P>0.05) except for transverse changes (arch) that were significantly greater in Ceramill Sintron frameworks (P<0.05). Conclusion. The two manufacturing processes were the same regarding dimensional changes and the magnitude of marginal gaps and both processes resulted in significant dimensional changes in frameworks. Ceramill Sintron frameworks showed significantly greater transverse changes than the conventional frameworks.

scholarly journals Selective laser melting for improving quality characteristics of a prism shaped topology injection mould tool insert for the automotive industry

2021 ◽  
pp. 095440622198938
Author(s):  
Mennatallah F El Kashouty ◽  
Allan EW Rennie ◽  
Mootaz Ghazy ◽  
Ahmed Abd El Aziz
Keyword(s):  
Surface Roughness ◽  
Selective Laser Melting ◽  
Automotive Industry ◽  
Injection Moulding ◽  
Dimensional Accuracy ◽  
Quality Characteristics ◽  
Surface Topology ◽  
Laser Melting ◽  
Injection Mould ◽  
Tool Insert

Manufacturing process constraints and design complexities are the main challenges that face the aftermarket automotive industry. For that reason, recently, selective laser melting (SLM) is being recognised as a viable approach in the fabrication of injection moulding tool inserts. Due to its versatility, SLM technology is capable of producing freeform designs. For the first reported time, in this study SLM is recognized for its novel application in overcoming fabrication complexities for prism shaped topology of a vehicle headlamp’s reflector injection moulding tool insert. Henceforth, performance measures of the SLM-fabricated injection mould tool insert is assessed in comparison to a CNC-milled counterpart to improve quality characteristics. Tests executed and detailed in this paper are divided into two stages; the first stage assesses both fabricated tool inserts in terms of manufacturability; the second stage assesses the functionality of the end-products by measuring the surface roughness, dimensional accuracy and light reflectivity from the vehicle reflectors. The results obtained show that employing SLM technology can offer an effective and efficient alternative to subtractive manufacturing, successfully producing tool inserts with complex surface topology. Significant benefits in terms of surface roughness, dimensional accuracy and product functionality were achieved through the use of SLM technology. it was concluded that the SLM-fabricated inserts products proved to have relatively lower values of surface roughness in comparison to their CNC counterparts.

Application of Taguchi Technique to Surface-Grinding of Mold Steel

2016 ◽  
Vol 689 ◽  
pp. 7-11 ◽  
Author(s):  
Y. Şahin ◽  
Senai Yalcinkaya
Keyword(s):  
Surface Roughness ◽  
Feed Rate ◽  
Quality Characteristics ◽  
Cutting Fluid ◽  
Depth Of Cut ◽  
Grinding Process ◽  
Machining Parameters ◽  
Taguchi Technique ◽  
Fluid Environment ◽  
Selection Of

The selection of optimum machining parameters plays a significant role for the quality characteristics of products and its costs for grinding. This study describes the optimization of the grinding process for an optimal parametric combination to yield a surface roughness using the Taguchi method. An orthogonal array and analysis of variance are employed to investigate the effects of cutting environment (A), depth of cut (B) and feed rate (C) on the surface roughness characteristics of mold steels. Confirmation experiments were conducted to verify the optimal testing parameters. The experimental results indicated that the surface finish decreased with cutting-fluid and depth of cut, but decreased with increasing feed rate. It is revealed that the cutting fluid environment had highest physical as well as statistical influence on the surface roughness (71.38%), followed by depth of cut (25.54%), but the least effect was exhibited by feed rate (1.62%).

Experimental Investigations for Rapid Moulding Solution of Plastics Using Polyjet Printing

2011 ◽  
Vol 701 ◽  
pp. 15-20 ◽  
Author(s):  
Rupinder Singh ◽  
Varinderjit Singh
Keyword(s):  
Plastic Material ◽  
Coordinate Measuring Machine ◽  
Dimensional Accuracy ◽  
Point Of View ◽  
Experimental Investigations ◽  
Support Material ◽  
Economic Point ◽  
Measuring Machine ◽  
Plastic Components ◽  
Polyjet Printing

Rapid prototyping (RP) has been in evidence for the past twenty years and is being widely used in diverse areas, from the building of aesthetic and functional prototypes to the production of tools and moulds for technological prototypes. The purpose of the present study is to experimentally investigate the rapid moulding (RM) solutions for plastic components using polyjet printing (PP) technique. Starting from the identification of component/benchmark, prototypes with three different type of plastic material were produced, at different orientation and support material. Measurements on the coordinate measuring machine helped in calculating the dimensional tolerances of the plastic components produced. Some important mechanical properties were also compared to verify the suitability of the components. The study highlighted the best orientation, support material quantity and type of plastic material for the selected component from dimensional accuracy and economic point of view as RM solution for plastic components. This process ensures rapid production of pre-series technological prototypes and proof of concept at less production cost and time.

The Effect of Machining Toolpath on Surface Roughness and Dimensional Accuracy for High-Speed Micro Milling

2017 ◽  
Vol 261 ◽  
pp. 69-76
Author(s):  
Amin Dadgari ◽  
De Hong Huo ◽  
David Swailes
Keyword(s):  
Surface Roughness ◽  
Process Planning ◽  
Tool Path ◽  
Dimensional Accuracy ◽  
Machining Process ◽  
Micro Milling ◽  
Geometric Features ◽  
Machining Parameters ◽  
Machining Performance ◽  
Planning Stage

This paper investigates different machining toolpath strategies on machining efficiency and accuracy in the micro milling of linear and circular micro geometric features. Although micro milling includes many characteristics of the conventional machining process, detrimental size effect in downscaling of the process can lead to excessive tool wear and machining instability, which would, in turn, affects the geometrical accuracy and surface roughness. Most of the research in micro milling reported in literature focused on optimising specific machining parameters, such as feed rate and depth of cut, to achieve lower cutting force, better surface roughness, and higher material removal rate. However, there was little attention given to the suitability and effect of machining tool path strategies. In this research, a tool path optimisation method with respect to surface roughness and dimensional accuracy is proposed and tested experimentally. Various toolpath strategies, including lace(0°), lace(45°), lace(90°), concentric and waveform in producing linear and circular micro geometric features were compared and analysed. Experimental results show that the most common used strategies lace(0°) and concentric reported in the literature have provided the least satisfactory machining performance, while waveform toolpath provides the best balance of machining performance for both linear and circular geometries. Hence, at process planning stage it is critical to assign a suitable machining toolpath strategy to geometries accordingly. The paper concludes that an optimal choice of machining strategies in process planning is as important as balancing machining parameters to achieve desired machining performance.

The Research of Five-Axis NC High Efficient Machining Technology for UAV Integral Impeller

2014 ◽  
Vol 598 ◽  
pp. 189-193
Author(s):  
Hui Zhao ◽  
Yu Jun Cai ◽  
Guo He Li
Keyword(s):  
Process Analysis ◽  
Coordinate Measuring Machine ◽  
Machining Process ◽  
Machining Parameters ◽  
Program Optimization ◽  
Cnc Machine ◽  
Rough Machining ◽  
High Efficient ◽  
Measuring Machine ◽  
Five Axis

In this paper, a very detailed process analysis for UAV integral impeller was made. According to the specific processing requirements, the appropriate CNC machine, blank and cutting tools have been choosing. In the rough machining process, various machining strategies have been used for comparing and analyzing, finally a more efficient roughing method with the accurate machining parameters will be obtained. At the same time the machining method have been improved and the processing parameters also have been determined in the semi-finishing process. Through the simulation processing in VERICUT, the possibility of the existence of interference which is usually occurred in the actual processing can be ruled out and the program optimization will be finished in the meantime. Finally, using intelligent three-coordinate measuring machine the consequence will be verified and inspected in the actual machining process.

Experimental Investigations for Statistically Controlled Rapid Moulding Solution of Plastics Using Polyjet Printing

2010 ◽  
Author(s):  
Rupinder Singh ◽  
Varinderjit Singh ◽  
Manohar Singh Saini
Keyword(s):  
Plastic Material ◽  
Coordinate Measuring Machine ◽  
Dimensional Accuracy ◽  
Point Of View ◽  
Experimental Investigations ◽  
Economic Point ◽  
The Past ◽  
Measuring Machine ◽  
Plastic Components ◽  
Polyjet Printing

Rapid prototyping (RP) has been in evidence for the past twenty years and is being widely used in diverse areas, from the building of aesthetic and functional prototypes to the production of tools and moulds for technological prototypes. The purpose of the present study is to experimentally investigate statistically controlled rapid moulding (RM) solutions for plastic components using polyjet printing (PP). Starting from the identification of component/benchmark, prototypes with three different type of plastic material were prepared, at different orientations. Measurements on the coordinate measuring machine helped in calculating the dimensional tolerances of the components prepared. Some important mechanical properties were also compared to verify the suitability of the components. The study highlighted the best orientation, support material quantity and type of plastic material for the selected component from dimensional accuracy and economic point of view as RM solution for plastic components. Final components prepared are acceptable as per ISO standard UNI EN 20286-I (1995). This process ensures rapid production of statistically controlled pre-series technological prototypes and proof of concept at less production cost and time.

scholarly journals Machine tool vibration on dimensional accuracy and surface roughness during milling operation of Al6082 with indexable carbide inserts

2020 ◽  
Vol 18 (2) ◽  
Author(s):  
Paramesh Chamble ◽  
M. R. Bharath ◽  
K. Lokeshaa ◽  
S. Christopher Ezhil Singh
Keyword(s):  
Surface Roughness ◽  
Cutting Tool ◽  
Dimensional Accuracy ◽  
Eutectic Phase ◽  
Depth Of Cut ◽  
Work Piece ◽  
Machining Parameters ◽  
Tool Vibration ◽  
Milling Operation ◽  
Carbide Inserts

In this research paper, machining tool vibration occurs because of relative motion between the work piece and the cutting tool, which influences the surface finish of the machined part and the lifespan of the cutting tool. Some of the parameters that influence machining tool vibration include feed rate, depth of cut and spindle speed. In this study, experimentation is carried out on a conventional vertical milling machine to investigate the influence of machining tool vibration on surface roughness during face milling operation of Al6082 alloy with indexable carbide inserts. The eutectic phase for joint of Al6082 is β-Al5FeSi eutectic phase. The machining is done in dry condition under the different combinations of Machining parameters designed through Taguchi L9 orthogonal array. The machining tool vibrations are captured with the help of tri-axial accelerometer. Analysis of variance (ANOVA) technique used to formulate the experimental data to analyze the effect of each parameter and machining tool vibration on surface roughness.

Sign in / Sign up

Export Citation Format

Share Document